Instrument panel -> VEHICLE INFORMATION AND SETTINGS MENU for Your Land Rover Evoque SUV 2020

Instrument panel  
Instrument panel  
Never allow the engine to run out of  
fuel. The resultant misfire can  
seriously damage the catalytic  
convertor.  
INSTRUMENT PANEL  
If the amber low fuel warning lamp  
illuminates, the vehicle should be refuelled  
as soon as possible. The approximate  
distance that can be travelled on the  
remaining fuel can be viewed via the trip  
computer range function.  
As a reminder for the location of the fuel  
filler, there is an arrow next to the fuel  
pump symbol pointing to the relevant side  
of the vehicle.  
1. Speedometer.  
2. Driver Information Centre (message  
centre).  
VEHICLE INFORMATION AND  
SETTINGS MENU  
3. Tachometer.  
4. Temperature gauge  
Serious engine damage can occur if  
the vehicle is driven while the  
engine is overheating.  
If the pointer moves onto the red line the  
engine is overheating. Stop the vehicle as  
soon as safety permits and allow the  
engine to idle until the temperature  
reduces. If, after several minutes, the  
temperature does not reduce, switch off  
the engine and allow to cool. If the problem  
persists, seek qualified assistance  
immediately.  
Note: If engine overheating occurs, there  
may be a noticeable reduction in engine  
power and the air conditioning may cease  
operation. This is a normal operating  
strategy, to reduce load on the engine and  
assist with cooling.  
A number of vehicle features and display  
settings may be configured via the vehicle  
information and settings menu.  
5. Fuel gauge.  
56  
Instrument panel  
To display and navigate through the vehicle  
information and settings menu, operate the  
menu control on the steering wheel.  
6. Select to access the Display Settings  
menu.The following features can be  
personalised:  
Language for message centre display.  
Temperature units.  
1. Steering wheel menu control.  
Press the up/down arrows to scroll  
through a list. The current selection  
will be highlighted.  
Appearance of the instrument panel.  
7. Select to access the vehicle Service Menu.  
Can be accessed only when the engine is  
not running.  
Press the right arrow to view a sub list.  
Press the left arrow to return to the  
previous menu.  
Note: Some personalisation options may not  
be available in all markets.  
Press the OK button to select the  
highlighted item.  
2. Select to close or return to main menu.  
3. Select to view all active warning messages.  
4. Select to access the Vehicle Set-up  
menu.The following features can be  
personalised:  
Before making any changes to the  
vehicle set-up, you must ensure  
that you have read and fully  
understood the relevant sections  
of the handbook. Failure to do so  
could lead to serious injury or  
death.  
Blind spot monitor.  
Speed warning.  
High beam assist.  
Passenger airbag.  
Alarm sensors.  
Cruise Eco data  
Reverse-dip mirrors.  
Easy entry/exit.  
2-stage locking.  
Audible lock warning  
Winter wiper park.  
Drive-away locking.  
Headlamp delay.  
5. Select to access the Trip Computer menu.  
57