Load carrying
Load carrying
Installation of the cover is the reverse of
removal.
REAR LOADSPACE
Never allow passengers to travel in
the loadspace under any
Storing the cover:
circumstances. All vehicle occupants
should be seated correctly and wear a
seat belt at all times when the vehicle
is in motion.
Do not store the loadspace cover
loose in the vehicle.
1. Remove the loadspace cover.
2. Fold the rear seats forward.
Always ensure that objects carried
within the vehicle are secured
properly.
3. Position the cover vertically in the vehicle
approximately where the upright rear seat
backrests are normally. The top surface of
the cover must be facing forwards with the
retaining brackets at the top.
4. Locate the retaining brackets onto the side
trim pins.
5. Return the rear seats to the upright locked
position.
ROOF RACKS
A loaded roof rack can reduce the
stability of the vehicle, particularly
when cornering and during cross
winds.
Driving off road with a loaded roof
rack is not recommended.
Fit only a roof rack system that is designed for
use with your vehicle. For further information,
consult your Land Rover Dealer/Authorised
Repairer.
To remove the loadspace cover:
The maximum load for a Land Rover approved
roof rack system is 75kg (165lb) while driving
on road. Off road driving reduces the limit to
50kg (110lb). The weight of the approved roof
rack system is not calculated as part of the
load.
1. Release the two straps from the pins on the
tailgate.
2. Pull the cover rearwards to release the
retaining brackets on the edges of the
cover from the pins on the loadspace side
trim.
If an alternative roof rack system is used, the
weight of that system must be included as part
of the load weight.
Never place objects on top of the
loadspace cover. During an accident
or sudden manoeuvre, loose objects
can cause serious injury or death.
71
