Get Navigation system -> START GUIDANCE Guide for Land Rover Evoque SUV 2020

Navigation system

ꢀ

Select OK. The destination entry menu is

shown and the information window shows

the currently selected search area.

SCREEN MODES

Touch the screen mode selection button (12)

to view a series of icons, each depicting a

different screen mode (as detailed below).

Touch the relevant icon to select the desired

screen mode.

SETTING A DESTINATION

After touching Agree, the initial map screen is

displayed, now select Nav Menu.

From the Navigation Menu, select Destination

entry.

Full screen view.

Select Address from the Destination screen

and input the town name.

Split screen view. A more detailed

view of the local area and road

system is displayed on the right.

Once sufficient letters have been entered,

touch List to display all the possible towns.

Shows the next junction in the

right half screen.

If necessary, use the scroll arrows to the left of

the list to search up or down. Select the town

you require.

This view is only available when

travelling on a motorway. It

displays automatically to show

remaining exits along your route.

Now enter the road name. Once sufficient

letters have been entered, touch List to display

all the possible roads.

Shows list of forthcoming

junctions and turn directions on

the right half screen.

Select the road you require.

Enter the house number of the address (if

known) then touch OK to confirm.

If the house number is not known, press OK -

the mid-point of the road is then used as the

destination.

SEARCH AREA

The navigation map database is divided into

countries, or geographically defined areas

within countries, called search areas. When

setting a route, the destination (or waypoint)

entered must be in the currently selected

search area.

The map screen showing the route settings and

destination details is displayed.

START GUIDANCE

After touching Destination, the system will

calculate the route.

Before attempting to set a destination or

waypoint, set the correct search area as

follows:

There is now a choice to select 3 Routes,

Change route or to Start navigation guidance.

ꢀ

Select Destination entry from the main

navigation menu.

Touch 3 Routes to display a choice of three

different route options on the map.

Select page 2 of Destination entry then

select Search area.

Scroll through the list and select the 3

letter code that corresponds to the desired

destination area.

149

Navigation system

The roads on the map are drawn in three

different colours to highlight each route.

EcoRoute helps you find the most fuel efficient

route available. A display of three leaves

indicates the most fuel efficient route.

VOICE GUIDANCE

To turn voice guidance on or off but maintain

route guidance, proceed as follows:

1. Touch Nav menu on the map menu screen.

2. Touch the Route voice guidance soft key.

The soft key will be highlighted when voice

guidance messages are enabled.

Select route 1, 2 or 3 by touching the

respective box displayed on the right side of

the map.

Touch Change Route followed by Route prefs.

to change the route settings. If a destination is

already set, touch Waypoint to add a waypoint

in the journey if required.

STOP ROUTE GUIDANCE

To stop route guidance, proceed as follows:

1. Touch Nav menu on the map menu screen.

2. Touch the Stop guidance soft key.

When you have made your selection, if any,

touch Go.

QUICK POI SELECTION

Note: As you approach a junction, in addition

to the voice guidance, an inset on the map will

display an enlarged view of the junction.

Touch the Map screen to display the POI

button. Touch the POI (Point of interest)

button. The screen shows six suggested

categories, five of which can be selected as

quick points of interest.

EASY ROUTE

In Route options, Easy route can be turned On

or Off.

Note: The POI icons will not be shown if the

map zoom level is greater than 1 km (½ mile).

When On is selected, Easy route changes the

calculation parameters of Route 3 in order to

reduce:

Select a Quick POI category, or select More to

see further POIs. Touch OK to confirm a

selection.

ꢀ

Junctions.

The map screen with the POI icon(s) is

displayed. Select the five POIs you wish to see

when the Quick POIs are displayed.

Turns.

Turns that cross traffic.

The priority of minor roads.

Complex junctions and manoeuvres.

RESTORE SYSTEM DEFAULTS

If you have made any changes to the system’s

default settings, use this menu to restore the

original settings.

LEARN ROUTE

In Route options, Learn route can be turned

On or Off.

When On is selected, if you make the same

deviation from the proposed route three times,

then the system will memorise the deviation

and offer that as the normal route from then on.

Select Reset all routes to delete any learnt

routes and return to the default settings.

MEMORY POINTS

From the navigation menu, select Stored

locations. This enables you to manage

destinations such as, place of work, home,

favourite restaurant or areas to avoid.

150

Navigation system

From the Stored locations menu you can save

up to 400 memory points or add your home

address.

MAP

After selecting map, the local area map is

displayed. Drag the circle to the area for your

destination or waypoint, zooming in if required.

Select Memory Points to add a stored location.

Touching any of the Stored locations

submenus allows you to Add, Edit or Delete.

This location can be stored as a destination or

waypoint.

Select Add to store a memory point.

COORDINATES

MEMORY POINT DETAILS

If you know the coordinates of your destination

they can be entered from this screen. The full

latitude must be entered first before the

longitude coordinates can be entered.

ꢀ

Touch Info. to display the details of the

selected memory point.

The details include Icon, Name, Position and

Tel.

When the coordinates have been entered,

touch OK.

The telephone number can be called by

touching the telephone button if a telephone is

connected.

If the coordinates entered are not contained

within the area covered by the available maps,

a message will be shown. This can also occur

if the incorrect coordinates have been entered.

The memory point details can be edited from

the Stored locations screen.

POSTCODE

After selecting Previous from the menu, the

screen shows a list of stored previous

destinations. Select your destination by

touching the bar. The details will be displayed

for confirmation.

Not all countries have this facility. Enter the

postcode of your waypoint or destination from

the keypad. The postcode must be entered

precisely, including any spaces or punctuation.

When the postcode has been entered touch OK.

Note: In some markets, list scrolling is not

active while driving for legislative reasons.

Only the items shown at the top of the list can

be selected.

EMERGENCY

Not all countries have this facility. Touch

Emergency on the Destination entry screen to

display a list of local police stations, hospitals

or Land Rover Dealerships.

MOTORWAY

After selecting Motorway from the menu, enter

the road name or number, then select an

entrance or exit. All of the entrance or exit

junctions for the chosen road are displayed.

Press Name to display the list in alphabetical

order or Distance to display the list in order of

proximity to the current vehicle location.

Touch the name of the facility to set it as a

destination or waypoint.

The map showing the selected motorway and

the selected exit junction is displayed.

The destination has now been set and the route

is calculated.

151

Navigation system -> START GUIDANCE for Your Land Rover Evoque SUV 2020

Popular Manuals