Occupant safety
ꢀ
ꢀ
The warning lamp fails to extinguish within
6 seconds of the ignition being turned on.
AIRBAG DEPLOYMENT EFFECTS
When an airbag inflates, a fine
powder is released. This is normal
and not an indication of a malfunction.
The powder may cause irritation to the
skin and should be thoroughly flushed
from eyes and any cuts or abrasions. If
breathing difficulty is experienced,
leave the vehicle if possible or open
the windows or doors to allow fresh air
in.
The warning lamp illuminates at any time
other than the bulb check, when the
ignition is on.
AIRBAG SERVICE INFORMATION
Do not attempt to service, repair,
replace, modify, or tamper with, any
part of the SRS. This includes wiring
or components in the vicinity of SRS
components. Doing so may cause the
system to trigger, or render the
system inoperative.
Airbags inflate at high speed and can
cause injuries. To minimise the risk of
injury, ensure that all occupants wear
correctly positioned seat belts, sit
correctly in the seats and position the
seats as far back as is practicable.
Do not use any electrical test
equipment or devices in the vicinity of
SRS components or wiring. Doing so
may cause the system to trigger, or
render the system inoperative.
Airbag deployment is accompanied by
a very loud noise which may cause
discomfort and temporary loss of
hearing.
All of the following operations should be
carried out only by a Dealer/Authorised
Repairer, or suitably qualified person:-
After inflation, some airbag
components will be very hot. Do not
touch the airbag components until
they have cooled sufficiently.
ꢀ
Removal or repair of any wiring or
component in the vicinity of any SRS
components.
ꢀ
ꢀ
ꢀ
Installation of electrical, or electronic,
equipment and accessories.
AIRBAG WARNING LAMP
The airbag warning lamp is
mounted in the instrument pack
and will illuminate as a bulb check
when the ignition is turned on.
Modification to the front or sides of the
vehicle exterior.
Attachment of accessories to the front or
sides of the vehicle.
If the warning lamp indicates that a
fault is present in the system, do not
use a child restraint on the front
passenger seat.
DISABILITY MODIFICATIONS
Occupants with disabilities which may require
modification of the vehicle, must contact a
Dealer/Authorised Repairer before any
modifications are made.
If any of the following warning lamp conditions
occur, the vehicle should be checked by your
Dealer/Authorised Repairer immediately.
ꢀ
The warning lamp fails to illuminate when
the ignition is turned on.
37
