Parking aids
TOWING
REAR VIEW CAMERA
The rear sensors are automatically disabled
when a trailer with an approved electrical
connector is connected.
It remains the driver's responsibility
to detect obstacles and estimate the
vehicle's distance from them when
reversing.
Note: Trailers fitted with LED lights will not
disable the rear parking aids sensors. When
reverse gear is selected, the attached trailer will
be detected as an obstacle.
When Reverse (R) is selected the camera
provides a wide-angle rear view colour image
on the touch screen.
The camera display has priority over the
parking aid display. To view the parking aid
display instead or to cancel camera display at
any time, briefly touch the display.
CLEANING THE SENSORS
When washing the vehicle do not aim
high pressure water jets directly at the
sensors. Do not use abrasive materials
or hard/sharp objects to clean the
sensors. Only use approved vehicle
shampoo.
To adjust the camera settings, touch and hold
anywhere on the touch screen to access the
user options screen.
The display also incorporates graphic overlays,
indicating vehicle direction, width and
proximity to surrounding objects.
The sensors should be kept clean to maintain
accuracy and performance.
SYSTEM FAULT
If a system fault is detected, a long
high-pitched tone will sound and the switch
indicator will flash. A message will be displayed
in the message centre. Contact your Dealer/
Authorised Repairer as soon as possible.
99
