Technical specifications for Your Land Rover Evoque SUV 2020

Technical specifications  
Technical specifications  
ENGINE SPECIFICATIONS  
Description  
Diesel  
Petrol  
Number of cylinders  
Displacement  
4
4
2179cc  
1-3-4-2  
15.8:1  
1999cc  
1-3-4-2  
10:1  
Firing order  
Compression ratio  
LUBRICANTS AND FLUIDS  
Description  
Variant  
Diesel with Diesel  
Particulate Filter (DPF) SLX Professional Powerflow C1  
Specification  
Engine oil  
5W/30 - Ford 934-B specification or Castrol  
Diesel without Diesel 5W/30 - Ford 913-B specification or Castrol  
Particulate Filter (DPF) SLX Professional A5  
Petrol  
5W/30 - Ford 913-B specification  
Gearbox oil  
Manual  
Castrol BOT350 M3  
Nippon AW-1 ATF  
Castrol BOT118+  
STAT OIL SL01-301  
Castrol EPX  
Automatic  
All vehicles  
All vehicles  
All vehicles  
All vehicles  
Power transfer unit  
Haldex coupling  
Rear differential oil  
Brake/Clutch fluid  
Shell DOT4 ESL. If unavailable, a low viscosity,  
synthetic compatible DOT4 brake fluid that  
meets ISO 4925 class 6 and Land Rover  
LRES22BF03 requirements may be used.  
Screen wash  
Coolant  
All vehicles  
All vehicles  
Screen wash with frost protection  
50% mixture of Texaco XLC antifreeze and  
water.  
Land Rover recommends Castrol oils.  
195  
Technical specifications  
CAPACITIES  
Item  
Variant  
Diesel  
Petrol  
Capacity  
Fuel tank  
60 litres (13.2 gallons)  
70 litres (15.4 gallons)  
5.9 litres (10.4 pints)  
5.6 litres (9.9 pints)  
2.0 litres (3.5 pints)  
7 litres (12.3 pints)  
0.75 litres (1.3 pints)  
0.65 litres (1.1pints)  
0.7 litres (1.2 pints)  
4.2 litres (7.4 pints)  
Engine oil refill and filter change Diesel  
Petrol  
Gearbox  
Manual  
Automatic  
Power transfer unit  
Haldex coupling  
Rear differential  
Washer reservoir  
All vehicles  
All vehicles  
All vehicles  
With headlamp powerwash  
Without headlamp powerwash 3.1 litres (5.5 pints)  
Cooling system (refill)  
Diesel:  
Manual, with auxiliary heater 5.6 litres (9.9 pints)  
Manual, without auxiliary  
heater  
Automatic, with auxiliary  
heater  
Automatic, without auxiliary  
heater  
5.4 litres (9.5 pints)  
5.9 litres (10.4 pints)  
5.7 litres (10.0 pints)  
Petrol:  
With auxiliary heater  
Without auxiliary heater  
4.6 litres (8.1 pints)  
4.4 litres (7.7 pints)  
The quoted capacities are approximate and  
provided as a guide only. All levels must be  
checked using the level marks, level plugs or  
driver information module, as applicable.  
196  
Technical specifications  
WEIGHTS  
Vehicle weight from  
Gross Vehicle Weight (GVW)1 Gross Train Weight (GTW) 2  
1640 kg (3615 lb)  
2350 kg (5180 lb)  
4150 kg (9150 lb)  
1 The maximum permissible weight of the vehicle including passengers and load.  
2 The maximum permissible weight of the vehicle and braked trailer including their respective  
loads.  
Note: For every 1000m increase above sea level, GTW must be reduced by 10%.  
Maximum front axle Maximum rear axle  
load1 load1  
1300 kg (2865 lb) 1145 kg 2525 (lb)  
Maximum roof rack  
load2  
Maximum payload3  
75 kg 165 (lb)  
500 kg 1100 (lb)  
¹ The front and rear axle maximum loads can not be reached simultaneously as this will exceed the  
GVW limit.  
² This figure includes the weight of the roof rack.  
3 Options fitted to vehicle will affect maximum payload.  
WHEEL ALIGNMENT DATA (CHINA)  
Wheel alignment - front toe  
Wheel alignment - rear toe  
Camber - front  
+ 0.22°  
+0.18°  
-0.51°  
-1.25°  
Camber - rear  
PEDAL TRAVEL (CHINA)  
Both the brake and clutch pedal travel are set at  
the factory and are non-adjustable.  
197  
Technical specifications  
DIMENSIONS - COUPE AND 5 DOOR  
Item  
Description  
Width (mirrors extended)  
mm (inches)  
2125 (83.7)  
Degrees  
1
-
-
Width (mirrors folded)  
1965 (77.4)  
2
2
2
Height - Coupe / 5 Door  
1605/1635 (63.2/64.4)  
1610/1640 (63.4/64.6)  
Height with roof rails - Coupe / 5 Door  
-
Height with roof rails and cross bars - Coupe / 5 1690/1720 (66.5/67.7)  
Door  
3
4
5
Approach angle - Pure/Dynamic  
Breakover angle  
-
25o/19o  
22o  
33o/30o  
22o  
-
Departure angle - Pure/Dynamic  
Departure angle with detachable tow ball  
Wheelbase  
-
-
6
7
2660 (104.8)  
-
-
Length (excluding licence plate plinth) -  
Pure/Dynamic  
4355/4365  
(171.5/171.9)  
8
Track - front  
1625 (63.9)  
1630 (64.2)  
500 (19.7)  
-
-
-
-
-
Track - rear  
-
-
-
Maximum wading depth  
Minimum ground clearance  
Turning circle (kerb to kerb)  
212 (8.3)  
11.3 m (37.1 ft)  
198  
Technical specifications  
Note: LED bulbs can be replaced only by a  
Land Rover Dealer/Authorised Repairer.  
BULB SPECIFICATION CHART  
Before attempting to replace a bulb,  
ensure that both the affected lamp and  
the vehicle's ignition, are turned off. If  
the circuit remains live, a short circuit  
can occur which may damage the  
vehicle's electrical system.  
Lamp  
Specification  
Power (Watts)  
Halogen headlamp (low and high beam)  
Xenon headlamp (low and high beam)  
Front direction indicators  
Front side repeater lamps  
Rear direction indicators  
Reverse lamps  
HB3  
D3S  
60  
35  
24  
5
PS24WSV  
W5W  
PS24WSV  
PS16W  
24  
16  
WHEELS AND TYRES  
Wheel size  
7.0J x 17  
Tyre size  
Speed rating  
225/65 R17  
235/60 R18  
235/55 R19  
245/45 R20  
V
V
8.0J x 18  
8.0J x 19  
8.0J x 20  
4.0J x 18  
V
V
155/85 R18 Temporary use spare wheel  
M
199  
Technical specifications  
SMART KEY SYSTEM  
TRANSMITTERS  
1. Steering column backup transmitter.  
2. Front cockpit transmitters.  
Any person fitted with an implanted  
medical device should ensure that the  
device is kept at a distance of at least  
22 cm (8.7in) away from any  
3. Front exterior door handle transmitters.  
4. Roof keyless receiver.  
transmitter mounted in the vehicle.  
This is to avoid any possibility of  
interference between the system and  
the device.  
5. Floor console front transmitter.  
6. Rear exterior door handle transmitters.  
7. Loadspace transmitter.  
8. Floor console rear transmitter.  
9. Tailgate passive entry receiver.  
10. Keyless start module.  
200  
Tyre pressure monitoring system  
Tyre pressure monitoring system  
The tyre pressure warning lamp  
TYRE PRESSURE MONITORING  
(TPM) SYSTEM  
illuminates when one or more of the  
tyres is significantly under-inflated  
or a non TPM system wheel and tyre is in use.  
The TPM system provides a low  
pressure warning and does not  
This will be accompanied by a  
graphic and message in the  
message centre. The graphic  
and message will indicate which  
of the TPM system tyres needs  
attention.  
re-inflate your tyres. Tyre pressures  
should be checked regularly using an  
accurate pressure gauge when cold.  
The TPM system can NOT register  
damage to a tyre. Regularly check the  
condition of your tyres, especially if  
the vehicle is driven off-road.  
You should stop and check the  
tyres as soon as possible and inflate them to  
the recommended pressure. See 212,  
CHECKING THE TYRE PRESSURES.  
When inflating tyres, take care not to  
bend or damage the TPM system  
valves. Always ensure correct  
alignment of the inflation head to the  
valve system.  
TPM SYSTEM MESSAGES  
When a problem is detected, the warning lamp  
will illuminate or flash. A text message will be  
displayed. Until the fault is rectified, the  
warnings will be repeated each time the  
ignition is switched on.  
Note: Different types of tyre may affect the  
performance of the TPM system. Always  
replace tyres in accordance with  
recommendations.  
Driving through variable climatic conditions  
can affect tyre pressures. This in turn may  
promote intermittent TPM system warnings.  
If all four road wheels and tyres are replaced  
with non TPM system wheels, e.g., a set of  
winter wheels and tyres, the message TYRE  
PRESSURE MONITORING UNAVAILABLE will  
be displayed. When the original wheels are  
refitted, the vehicle will need to travel a short  
distance before the TPM system recognises the  
wheel sensors. At that point, TYRE PRESSURE  
MONITORING AVAILABLE will be displayed.  
The system will automatically recognise any  
changes in wheel positions. The vehicle must  
be stationary for 15 minutes during a wheel  
change to allow the system to detect the  
change. See 208, CHANGING A ROAD WHEEL.  
After driving above 25km/h (18mph), any  
deflation warning should clear within a few  
minutes.  
1. TPM system external metal lock nut and  
valve.  
2. Non TPM system rubber valve.  
The TPM system constantly monitors the tyre  
pressure in each wheel. Temporary use spare  
tyres (when fitted) are not monitored.  
201