Vehicle recovery
Vehicle recovery
RECOVERY
TOWING EYES
The method for recovery/ transportation of the
vehicle is on a transporter or trailer designed
for that purpose.
The towing eyes at the front and rear
of the vehicle are designed for
on-road recovery only. If they are used
for any other purpose, it may result in
vehicle damage and serious injury.
Ensure that transportation is carried out by
suitably qualified person and that the vehicle is
secured correctly.
The towing eyes are located behind panels in
the bumpers. Panel design will vary depending
on the vehicle specification. To use the towing
eyes:
3. If the Dynamic pack is fitted, the exhaust
finisher will also require removal before the
towing eye can be used.
Installation of the panels is the reverse of
removal.
1. Front bumper - rotate the two fasteners 90
degrees counter clockwise. Pull the panel
away from the front bumper.
Remove the towing eye covers before
driving off-road, to prevent damage or
loss.
2. Rear bumper - rotate the two fasteners 90
degrees counter clockwise. Pull the panel
away from the rear bumper.
216
