When Driving -> Cruise Control for Your Mazda Cx-5 SUV 2023

When Driving  
Cruise Control  
Cruise Control*  
With cruise control, you can set and automatically maintain any speed of more than about  
25 km/h (16 mph).  
WARNING  
Do not use the cruise control under the following conditions:  
Using the cruise control under the following conditions is dangerous and could result in loss  
of vehicle control.  
Hilly terrain  
Steep inclines  
Heavy or unsteady traffic  
Slippery or winding roads  
Similar restrictions that require inconsistent speed  
Cruise Control Switch  
RESUME/+ switch  
SET/- switch  
ON switch  
OFF/CANCEL switch  
NOTE  
If your Mazda has the following steering switch, your Mazda is equipped with the Mazda  
Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.  
*Some models.  
4-271  
When Driving  
Cruise Control  
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go  
function) on page 4-146.  
switch  
SET+ switch  
RES switch  
switch  
SET- switch  
MODE switch  
CANCEL switch  
OFF switch  
Leaving the cruise control system in an  
activation-ready state while the cruise  
control is not in use is dangerous as the  
cruise control could unexpectedly activate  
if the activation button is accidentally  
pressed, and result in loss of vehicle control  
and an accident.  
Cruise Main Indication (White)/  
Cruise Set Indication (Green)  
NOTE  
The indication has 2 colors.  
When the ignition is switched OFF, the  
system status before it was turned off is  
maintained. For example, if the ignition is  
switched OFF with the cruise control  
system operable, the system will be  
operable when the ignition is switched ON  
the next time.  
Cruise Main Indication (White)  
The indication turns on (white) when the  
cruise control system is activated.  
Cruise Set Indication (Green)  
The indication turns on (green) when a  
cruising speed has been set.  
Activation  
To activate the system, press the ON  
switch. The cruise main indication (white)  
turns on.  
Activation/Deactivation  
WARNING  
Deactivation  
To deactivate the system, press the OFF/  
CANCEL switch.  
The cruise main indication (white) turns  
off.  
Always turn off the cruise control system  
when it is not in use:  
4-272  
When Driving  
Cruise Control  
The vehicle speed preset using the cruise  
control is displayed in the instrument  
cluster and the active driving display  
(vehicles with active driving display).  
Instrument Cluster  
To Set Speed  
1. Activate the cruise control system by  
pressing the ON switch. The cruise  
main indication (white) turns on.  
2. Accelerate to the desired speed, which  
must be more than 25 km/h (16 mph).  
3. Set the cruise control by pressing the  
SET/ switch at the desired speed. The  
cruise control is set at the moment the  
SET/ switch is pressed. Release the  
accelerator pedal simultaneously. The  
cruise set indication (green) turns on.  
Type A  
*1  
*1: Needle indicates set speed.  
NOTE  
Type B  
Type C  
The cruise control speed setting cannot  
be performed under the following  
conditions:  
The selector lever is in the P or N  
position.  
The parking brake is applied.  
Active Driving Display  
Release the SET/ or RESUME/  
switch at the desired speed, otherwise  
the speed will continue increasing while  
the RESUME/ switch is pressed and  
held, and continue decreasing while the  
SET/ switch is pressed and held  
(except when the accelerator pedal is  
depressed).  
On a steep grade, the vehicle may  
momentarily slow down while ascending  
or speed up while descending.  
To Increase Cruising Speed  
Follow either of these procedures.  
To increase speed using cruise control  
switch  
Press the RESUME/ switch and hold it.  
Your vehicle will accelerate. Release the  
switch at the desired speed.  
The cruise control will cancel if the  
vehicle speed decreases below 21 km/h  
(13 mph) when the cruise control is  
activated, such as when climbing a steep  
grade.  
Press the RESUME/ switch and release  
it immediately to adjust the preset speed.  
Multiple operations will increase the  
preset speed according to the number of  
times it is operated.  
The cruise control may cancel at about  
15 km/h (9 mph) below the preset speed,  
such as when climbing a long, steep  
grade.  
4-273  
When Driving  
Cruise Control  
Increasing speed with a single  
RESUME/ switch operation  
pedal) and the system is still activated, the  
most recent set speed will automatically  
resume when the RESUME/ switch is  
pressed.  
If vehicle speed is below 25 km/h (16  
mph), increase the vehicle speed up to 25  
km/h (16 mph) or more and press the  
RESUME/ switch.  
Instrument cluster display for vehicle  
speed indicated in km/h: 1 km/h (0.6 mph)  
Instrument cluster display for vehicle  
speed indicated in mph: 1 mph (1.6 km/h)  
To increase speed using accelerator  
pedal  
To Temporarily Cancel  
Depress the accelerator pedal to accelerate  
to the desired speed. Press the SET/  
switch and release it immediately.  
To temporarily cancel the system, use one  
of these methods:  
Slightly depress the brake pedal.  
Press the OFF/CANCEL switch.  
NOTE  
Accelerate if you want to speed up  
temporarily when the cruise control is on.  
Greater speed will not interfere with or  
change the set speed. Take your foot off  
the accelerator to return to the set speed.  
If the RESUME/ switch is pressed when  
the vehicle speed is 25 km/h (16 mph) or  
higher, the system reverts to the previously  
set speed.  
To Decrease Cruising Speed  
NOTE  
If any of the following conditions occur,  
the cruise control system is temporarily  
canceled.  
Press the SET/ switch and hold it. The  
vehicle will gradually slow.  
Release the switch at the desired speed.  
The parking brake is applied.  
The selector lever is in the P or N  
Press the SET/ switch and release it  
immediately to adjust the preset speed.  
Multiple operations will decrease the  
preset speed according to the number of  
times it is operated.  
position.  
When the cruise control system is  
temporarily canceled by even one of the  
applicable cancel conditions, the speed  
cannot be re-set.  
Decreasing speed with a single SET/  
switch operation  
The cruise control cannot be cancelled  
while driving in manual mode (selector  
lever shifted from D to M position).  
Therefore, engine braking will not be  
applied even if the transaxle is shifted  
down to a lower gear. If deceleration is  
required, lower the set speed or depress  
the brake pedal.  
Instrument cluster display for vehicle  
speed indicated in km/h: 1 km/h (0.6 mph)  
Instrument cluster display for vehicle  
speed indicated in mph: 1 mph (1.6 km/h)  
To Resume Cruising Speed at More  
Than 25 km/h (16 mph)  
If the cruise control system temporarily  
canceled (such as by applying the brake  
4-274  
When Driving  
Cruise Control  
To Deactivate  
When a cruising speed has been set  
(cruise set indication (green) turns on)  
Long-press the OFF/CANCEL switch or  
press the OFF/CANCEL switch 2 times.  
When a cruising speed has not been set  
(cruise main indication (white) turns  
on)  
Press the OFF/CANCEL switch.  
4-275