Get When Driving -> Instrument Cluster and Display Guide for Mazda Cx-5 SUV 2023

When Driving

Instrument Cluster and Display

Instrument Cluster (Type A)

① Speedometer..........................................................................................................page 4-12

② Tachometer............................................................................................................page 4-12

③ Multi-information Display (Type A).....................................................................page 4-14

④ Engine Coolant Temperature Gauge..................................................................... page 4-17

⑤ Fuel Gauge............................................................................................................ page 4-18

⑥ Dashboard Illumination.........................................................................................page 4-18

⑦ Speed Unit Selector...............................................................................................page 4-19

Free/Open Source Software Information

This product includes free/open sources. Information about the licensing and source code is

available at the following URL.

https://www.nippon-seiki.co.jp/business_ic_meter/

This may cause severe engine damage.

Speedometer

▼

The speedometer indicates the speed of the

vehicle.

1

*

STRIPED ZONE RED ZONE

Tachometer

▼

The tachometer shows engine speed in

thousands of revolutions per minute (rpm).

CAUTION

¹The range varies depending on the type

*

of gauge.

Do not run the engine with the tachometer

needle in the RED ZONE.

4-12

When Driving

Instrument Cluster and Display

NOTE

When the tachometer needle enters the

STRIPED ZONE, this indicates to the

driver that the gears should be shifted

before entering the RED ZONE.

4-13

When Driving

Instrument Cluster and Display

Multi-information Display (Type A)

▼

Dashboard illumination knob

INFO switch

Multi-information Display (Type A)

The multi-information display indicates the following information.



Speedometer

Odometer

Trip meter

Outside temperature

Distance-to-empty

Average fuel economy

Current fuel economy

Maintenance Monitor

Mazda intelligent Drive Select (Mi-Drive) Display

Blind Spot Monitoring (BSM) Display

Traffic Sign Recognition System (TSR) Display

Distance Recognition Support System (DRSS) Display



Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)

System Display

Traffic Jam Assist (TJA) Display

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

Cruise Control Display

Compass Display

Door-Ajar/Liftgate-Ajar Warning Indication

Message Display



4-14

When Driving

Instrument Cluster and Display

The screen content changes each time the INFO switch is pressed.

Press the INFO switch

*1

Basic display

*2

Warning message

display

Press the INFO switch

Compass display

Trip Meter A display

Press the INFO switch

Trip Meter B display

Maintenance Monitor

display

Press the INFO switch

i-ACTIVSENSE display

Press the INFO switch

*1: Displayed when opening/closing door/trunk lid.

*2: Displayed only when a warning occurs.

4-15

When Driving

Instrument Cluster and Display

The screen content changes each time the dashboard illumination knob is pressed and held.

Gauge indication

Press and hold dashboard

illumination knob

Press and hold

dashboard illumination

Numerical indication

knob

Press and hold dashboard

illumination knob

Display off

4-16

When Driving

Instrument Cluster and Display

For instance, trip meter A can record the

distance from the point of origin, and trip

meter B can record the distance from

where the fuel tank is filled.

Odometer, Trip Meter and Trip

Meter Selector

▼

The odometer is constantly displayed on

the screen when the ignition is switched

ON, and the TRIP A or TRIP B screen can

be displayed by operating the INFO

switch.

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

INFO switch

The trip meter and average fuel economy

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode.

NOTE



Only the trip meters record tenths of

Trip Meter A

display

kilometers (miles).

The trip record will be erased when:



The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9 km

Press the INFO switch



(mile).

Trip Meter B

display

Engine Coolant Temperature Gauge

▼

Displays the engine coolant temperature.

The blue range of the gauge indicates that

the engine coolant temperature is low, and

the red range of the gauge indicates that

the engine coolant temperature is high and

overheating.

Odometer

The odometer records the total distance

the vehicle has been driven.

Trip meter

The driving distance for a specified

interval is indicated. Two types (TRIP A,

TRIP B) of interval distance and the

average fuel economy for each can be

measured.

4-17

When Driving

Instrument Cluster and Display

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

If inconsistency in engine performance or

stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.

CAUTION

If the engine coolant temperature gauge needle is

in the red range, there is the possibility of

overheating. Drive slowly to reduce engine load

until you can ﬁnd a safe place to stop the vehicle

and wait for the engine to cool down.

Refer to Overheating on page 7-17.

Refer to Taking Action on page 7-31.

NOTE



(SKYACTIV-G 2.5T)

After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving

on a slope or curve since the fuel moves

in the tank.

If the engine coolant temperature is high

or the engine is hot, the engine output

may be limited.



Fuel Gauge

The direction of the arrow ( ) indicates

▼

that the fuel-filler lid is on the left side

of the vehicle.

The fuel gauge shows approximately how

much fuel is remaining in the tank when

the ignition is switched ON. We

Dashboard Illumination

▼

recommend keeping the tank over 1/4 full.

When the lights are turned on with the

ignition switched ON, the brightness of

the dashboard illumination is dimmed.

However, when the light sensor detects

that the surrounding area is bright such as

when the lights are turned on in the

daytime, the dashboard illumination does

not dim.

Full

1/4 Full

NOTE



When the ignition is switched ON in the

early evening or at dusk, the dashboard

illumination is dimmed for several

seconds until the light sensor detects the

brightness of the surrounding area,

however, the dimming may cancel after

the brightness is detected.

Empty



When the lights are turned on, the

lights-on indicator light in the

instrument cluster turns on.

Refer to Headlights on page 4-72.

4-18

When Driving

Instrument Cluster and Display

The brightness of the instrument cluster

and dashboard illuminations can be

adjusted by rotating the knob.

Speed Unit Selector

▼

In some countries, you may have to

change the speed units between km/h and

mph.



The brightness decreases by rotating the

knob to the left. A beep sound will be

heard when the knob has been rotated to

the maximum dim position.

When pressing the dashboard illumination

knob, the speed units in the instrument

cluster will change.



The brightness increases by rotating the

knob to the right.

Dashboard illumination knob

Dim

Bright

Outside Temperature Display

▼

When the ignition is switched ON, the

outside temperature is displayed.

Function for canceling illumination

dimmer

The illumination dimmer can be canceled

by rotating the dashboard illumination

knob to the right until a beep sound is

heard while the instrument cluster is

dimmed with the ignition switched ON. If

the instrument cluster's visibility is

reduced due to glare from surrounding

brightness, cancel the illumination

dimmer.

NOTE



Under the following conditions, the

outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:



Significantly cold or hot temperatures.

Sudden changes in outside

NOTE



temperature.

The vehicle is parked.

The vehicle is driven at low speeds.

When the illumination dimmer is



canceled, the instrument cluster cannot

be dimmed even if the lights are turned

on.



Changing the Temperature Unit of the

Outside Temperature Display



When the illumination dimmer is

canceled, the screen in the center

display switches to constant display of

the daytime screen.

The outside temperature unit can be

switched between Celsius and Fahrenheit.

4-19

When Driving

Instrument Cluster and Display



Settings can be changed by operating the

center display screen.

Refer to the Settings section in the Mazda

Connect Owner's Manual.

If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

Distance-to-empty

▼

This displays the approximate distance

you can travel on the remaining fuel based

on the fuel economy.

Average Fuel Economy

▼

The distance-to-empty will be calculated

and displayed every second.

The average fuel economy is calculated

every minute from the total traveled

distance on the trip meter and the total fuel

consumption, and the average fuel

economy for either TRIP A or TRIP B is

displayed.

NOTE

The average fuel economy and trip meters

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode. After the data is cleared, the fuel

consumption is recalculated and the - - -

km/L (- - - mpg) for the 1 minute prior to

it being displayed is indicated.



Even though the distance-to-empty

display may indicate a sufficient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.



The display will not change unless you

add more than approximately 9 L (2.3

US gal, 1.9 Imp gal) of fuel.

The distance-to-empty is the



approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

indicating the remaining fuel supply

disappear.

4-20

When Driving

Instrument Cluster and Display

Refer to the Applications (Mazda Connect

(Type A))/Information (Mazda Connect

(Type B)) section in the Mazda Connect

Owner's Manual.

Current Fuel Economy

▼

This displays the current fuel economy by

calculating the amount of fuel

consumption and the distance traveled.

Mazda intelligent Drive Select

(Mi-Drive) Display

▼

The display changes depending on the

driving mode.

Sport mode

NOTE



Indicates the 0 position when the vehicle

speed is about 5 km/h (3 mph) or slower.

The arrow on the scale indicates the



average fuel economy.

Off-road mode

Maintenance Monitor

▼

The following maintenance period

notifications can be displayed by turning

the Maintenance Monitor on.



Scheduled Maintenance

Tire Rotation

Oil Change



When the remaining days to the

Blind Spot Monitoring (BSM)

Display

▼

maintenance period is 15 days or less, or

the remaining distance is 1,000 km (600

miles) or shorter, a message is indicated

when the ignition is switched ON.

Displays the system status.

For the setting method and indications for

the maintenance monitor, refer to the

Maintenance Monitor.

4-21

When Driving

Instrument Cluster and Display

Traffic Jam Assist (TJA) Display^*

Refer to Blind Spot Monitoring (BSM) on

page 4-125.

▼

Displays the currently set system status.

Lane-keep Assist System (LAS) &

Lane Departure Warning System

(LDWS) Display^*

▼

Displays the system status.

Refer to Traffic Jam Assist (TJA) on page

4-161.

Distance Recognition Support

System (DRSS) Display^*

▼

Refer to Lane-keep Assist System (LAS)

& Lane Departure Warning System

(LDWS) on page 4-177.

Displays the distance between your

vehicle and the vehicle ahead.

Mazda Radar Cruise Control with

Stop & Go function (MRCC with

Stop & Go function) Display^*

▼

Displays the currently set system status.

Refer to Distance Recognition Support

System (DRSS) on page 4-136.

Refer to Mazda Radar Cruise Control with

Stop & Go function (MRCC with Stop &

Go function) on page 4-146.

*Some models.

4-22

When Driving

Instrument Cluster and Display

Cruise Control Set Vehicle Speed

Display^*

Message Display

▼

A message such as the system operation

status, a malfunction, or an abnormality is

indicated.

The vehicle speed preset using the cruise

control is displayed.

Warning/indicator light in instrument

cluster turns on/flashes or symbol is

indicated on display at same time as

message

Check the information regarding the

warning/indicator light or indicated

symbol.

Refer to If a Warning Indication/Warning

Lights on page 4-24.

Refer to Cruise Control on page 4-271.

Refer to If a Indication/Indicator Lights on

page 4-26.

Compass Display

▼

The direction the vehicle is moving is

displayed in one of eight directions while

the vehicle is being driven.

Message only is indicated on display

Follow the instructions indicated on the

display. For the display content, refer to

the next page.

Refer to If a Message Indicated on

Multi-information Display on page 7-37.

Display

N

Direction

North

S

South

E

East

W

West

NE

NW

SE

Northeast

Northwest

Southeast

Southwest

SW

*Some models.

4-23

When Driving

Instrument Cluster and Display

Warning/Indicator Lights

▼

Instrument Cluster varies depending on model and specifications.

Instrument Cluster

Center of Dashboard

Warning lights will appear in any of the highlighted areas

Warning Indication/Warning Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Warning

Page

*1*2

7-22

Brake System Warning Indication/Warning Light

Electronic Brake

Force Distribu‐

tion System

Warning

*1

ABS Warning Light

7-22

ABS warning

7-25

*1

7-22

Charging System Warning Indication/Warning Light

*1

Engine Oil Warning Light

High Engine Coolant Temperature Warning Indication

Power Steering Malfunction Indication

7-22

Master Warning Indication/Warning Light

7-25

4-24

When Driving

Instrument Cluster and Display

Signal

Warning

Page

*1

7-25

Electric Parking Brake (EPB) Warning Indication/Warning Light

*1

7-25

Check Engine Light

Automatic Transaxle Warning Indication

7-25

*

AWD Warning Indication

*1

7-25

Air Bag/Seat Belt Pretensioner System Warning Light

Flashing

7-25

*1

Tire Pressure Monitoring System Warning Light

Turns on

7-31

Amber

7-25

KEY Warning Indication

White

7-31

(Amber/White)

(Amber)

*

*1

7-25

High Beam Control System (HBC) Warning Indication/Warning Light

*

Blind Spot Monitoring (BSM) Warning Indication

*

Driver Attention Alert (DAA) Warning Indication

(Amber)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

7-25

& Go function) Warning Indication

*

7-25

Traffic Jam Assist (TJA) Warning Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

(LDWS) Warning Indication

*1

LED Headlight Warning Light

*

Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning In‐

7-31

dication

Low Fuel Warning Indication/Warning Light

*1

Check Fuel Cap Warning Indication/Warning Light

*Some models.

4-25

When Driving

Instrument Cluster and Display

Signal

Warning

Page

*1

7-31

Engine Oil Level Warning Light

Seat Belt Warning Light (Front seat)

Seat Belt Warning Light (Rear seat)

7-31

(Red)

*

7-31

Low Washer Fluid Level Warning Indication

Door-Ajar Warning Indication

Liftgate-Ajar Warning Indication

Door-Ajar Warning Light

7-31

*

1

2

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

Authorized Mazda Dealer.

The light turns on continuously when the parking brake is applied.

Indication/Indicator Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Indicator

Seat Belt Indicator Light (Rear seat)

Page

2-30

(Green)

*

*1

2-72

Front Passenger Air Bag Deactivation Indicator Light

*1

3-43

4-29

4-63

Security Indicator Light

Wrench Indication

Shift Position Indication

*Some models.

4-26

When Driving

Instrument Cluster and Display

Signal

Indicator

Lights-On Indication/Indicator Light

Page

4-72

Headlight

High-Low Beam

4-76

Headlight High-Beam Indicator Light

Flashing the

Headlights

4-76

Turn and

Lane-Change

Signals

4-79

Turn Signal/Hazard Warning Indicator Lights

Hazard Warning

Flasher

4-87

*1

4-102

4-157

4-176

AUTOHOLD Active Indicator Light

*

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) indicator Light

*

Traffic Jam Assist (TJA) indicator Light

Traction Control

System (TCS)

4-107

Dynamic Stabil‐

ity Control

(DSC)

*1

TCS/DSC Indicator Light

4-109

Turns on

7-25

*

*1

4-107

TCS OFF Indicator Light

*1

4-110

4-112

Off-Road Traction Assist Indicator Light

Select Mode Indication

*

4-123

High Beam Control System (HBC) Indicator Light

(Green)

Malfunction

7-25

*

*1

Blind Spot Monitoring (BSM) OFF Indicator Light

Except malfunc‐

tion

4-129

*Some models.

4-27

When Driving

Instrument Cluster and Display

Signal

(White)

Indicator

Page

*

4-141

Driver Attention Alert (DAA) Indication

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

4-151

4-169

4-151

4-169

4-179

& Go function) Main Indication

*

Traffic Jam Assist (TJA) Main Indication

*

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) Set Indication

(Green)

*

Traffic Jam Assist (TJA) Set Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

(LDWS) Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

4-189

*1

(LDWS) OFF Indicator Light

Advanced Smart

City Brake Sup‐

port (Advanced

SCBS)

4-193

Smart City

Brake Support

[Forward]

(SCBS F)

4-196

*

Smart City Brake Support (SCBS) Indication

Smart City

Brake Support

[Reverse]

(SCBS R)

4-201

*Some models.

4-28

When Driving

Instrument Cluster and Display

Signal

Indicator

Page

Advanced Smart

City Brake Sup‐

port (Advanced

SCBS)

4-193

Smart City

Brake Support

[Forward]

(SCBS F)

4-196

*

Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indica‐

*1

tor Light

Smart City

Brake Support

[Reverse]

(SCBS R)

4-201

Smart Brake

Support (SBS)

System

4-203

*

4-272

Cruise Main Indication

(White)

(Green)

*

Cruise Set Indication

*

1 The light turns on when the ignition is switched on for an operation check, and turns off

a few seconds later or when the engine is started. If the light does not turn on or remains

turned on, have the vehicle inspected at an Authorized Mazda Dealer.



When the engine oil replacement period

has arrived.

Wrench Indication

▼

NOTE

The wrench indication is displayed under

the following conditions.



The wrench indication may display

earlier than the preset period depending

on vehicle usage conditions.

Whenever the engine oil is replaced, a

reset of the vehicle engine control unit is

necessary.



When the preset maintenance period has

arrived.

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.



*Some models.

4-29

When Driving

Instrument Cluster and Display

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.

4-30

When Driving

Instrument Cluster and Display

Instrument Cluster (Type B)

① Speedometer..........................................................................................................page 4-31

② Tachometer............................................................................................................page 4-31

③ Multi-information Display (Type B).....................................................................page 4-32

④ Dashboard Illumination.........................................................................................page 4-36

NOTE

Speedometer

▼

When the tachometer needle enters the

STRIPED ZONE, this indicates to the

driver that the gears should be shifted

before entering the RED ZONE.

The speedometer indicates the speed of the

vehicle.

Tachometer

▼

The tachometer shows engine speed in

thousands of revolutions per minute (rpm).

CAUTION

Do not run the engine with the tachometer

needle in the RED ZONE.

This may cause severe engine damage.

1

*

STRIPED

ZONE

1

*

RED ZONE

¹The range varies depending on the type

*

of gauge.

4-31

When Driving

Instrument Cluster and Display

Multi-information Display (Type B)

▼

INFO switch

Multi-information Display (Type B)

The multi-information display indicates the following information.



Odometer

Trip meter

Engine coolant temperature gauge

Fuel gauge

Outside temperature

Distance-to-empty

Average fuel economy

Current fuel economy

Maintenance Monitor

Blind Spot Monitoring (BSM) Display

Distance Recognition Support System (DRSS) Display

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)



System Display

Traffic Jam Assist (TJA) Display

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

Cruise Control Display

Compass Display

Message Display



4-32

When Driving

Instrument Cluster and Display

The screen content changes each time the INFO switch is pressed.

Press the INFO switch

*1

Warning message,

Outside Temperature,

Odometer, Fuel Gauge

Current Fuel Economy,

Trip Meter A, Average

Fuel Economy, Outside

Temperature,

Odometer, Fuel Gauge

Press the INFO switch

Engine Coolant

Temperature Gauge,

Compass,

Distance-to-empty,

Outside Temperature,

Odometer, Fuel Gauge

Current Fuel Economy,

Trip Meter B, Average

Fuel Economy, Outside

Temperature,

Odometer, Fuel Gauge

Press the INFO switch

Engine Coolant

i-ACTIVSENSE display,

Outside Temperature,

Odometer, Fuel Gauge

Temperature Gauge,

Maintenance Monitor,

Outside Temperature,

Odometer, Fuel Gauge

Press the INFO switch

*1: Displayed only when a warning occurs.

4-33

When Driving

Instrument Cluster and Display

meter B can record the distance from

where the fuel tank is filled.

Odometer, Trip Meter and Trip

Meter Selector

▼

The odometer is constantly displayed on

the screen when the ignition is switched

ON, and the TRIP A or TRIP B screen can

be displayed by operating the INFO

switch.

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

The trip meter and average fuel economy

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode.

INFO switch

NOTE



Only the trip meters record tenths of

kilometers (miles).

The trip record will be erased when:



Odometer,

Trip meter A



The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9 km

(mile).



Press the INFO switch

Engine Coolant Temperature Gauge

▼

Odometer,

Trip meter B

Displays the engine coolant temperature.

The blue range of the gauge indicates that

the engine coolant temperature is low, and

the red range of the gauge indicates that

the engine coolant temperature is high and

overheating.

Odometer

The odometer records the total distance

the vehicle has been driven.

Trip meter

The driving distance for a specified

interval is indicated. Two types (TRIP A,

TRIP B) of interval distance and the

average fuel economy for each can be

measured.

For instance, trip meter A can record the

distance from the point of origin, and trip

4-34

When Driving

Instrument Cluster and Display

the ignition is switched ON. We

recommend keeping the tank over 1/4 full.

CAUTION

If the high engine coolant temperature

warning light (red) ﬂashes, there is a

possibility of overheating. Drive slowly to

reduce engine load until you can ﬁnd a safe

place to stop the vehicle and wait for the

engine to cool down.

Full

Refer to Overheating on page 7-17.

1/4 Full

NOTE



(SKYACTIV-G 2.5T)

If the engine coolant temperature is high

or the engine is hot, the engine output

may be limited.



The temperature unit (Centigrade/

Empty

Fahrenheit) of the engine coolant gauge

display changes in conjunction with the

temperature unit of the outside

temperature display.

Refer to the Settings section in the

Mazda Connect Owner's Manual.

If the fuel level is low, ( ) and ( ) turn an

amber color. Refuel as soon as possible.

If inconsistency in engine performance or

stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.

Fuel Gauge

▼

The fuel gauge shows approximately how

much fuel is remaining in the tank when

Refer to Taking Action on page 7-31.

NOTE



After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving

on a slope or curve since the fuel moves

in the tank.



The direction of the arrow ( ) indicates

that the fuel-filler lid is on the left side

of the vehicle.

4-35

When Driving

Instrument Cluster and Display



The brightness increases by rotating the

knob to the right.

Dashboard Illumination

▼

(Without auto-light control)

When the lights are turned on with the

ignition switched ON, the brightness of

the dashboard illumination is dimmed.

(With auto-light control)

Dim

When the lights are turned on with the

ignition switched ON, the brightness of

the dashboard illumination is dimmed.

However, when the light sensor detects

that the surrounding area is bright such as

when the lights are turned on in the

daytime, the dashboard illumination does

not dim.

Bright

Function for canceling illumination

dimmer

The illumination dimmer can be canceled

by rotating the dashboard illumination

knob to the right until a beep sound is

heard while the instrument cluster is

dimmed with the ignition switched ON. If

the instrument cluster's visibility is

reduced due to glare from surrounding

brightness, cancel the illumination

dimmer.

NOTE



(With auto-light control)

When the ignition is switched ON in the

early evening or at dusk, the dashboard

illumination is dimmed for several

seconds until the light sensor detects the

brightness of the surrounding area,

however, the dimming may cancel after

the brightness is detected.

NOTE



When the lights are turned on, the



The illumination dimmer can be

canceled by pressing the dashboard

illumination knob.

lights-on indicator light in the

instrument cluster turns on.

Refer to Headlights on page 4-72.



When the illumination dimmer is

canceled, the instrument cluster cannot

be dimmed even if the lights are turned

on.

The brightness of the instrument cluster

and dashboard illuminations can be

adjusted by rotating the knob.



When the illumination dimmer is



The brightness decreases by rotating the

canceled, the screen in the center

display switches to constant display of

the daytime screen.

knob to the left. A beep sound will be

heard when the knob has been rotated to

the maximum dim position.

4-36

When Driving

Instrument Cluster and Display

Outside Temperature Display

Distance-to-empty

▼

When the ignition is switched ON, the

outside temperature is displayed.

This displays the approximate distance

you can travel on the remaining fuel based

on the fuel economy.

The distance-to-empty will be calculated

and displayed every second.

NOTE



Under the following conditions, the

outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:

NOTE



Even though the distance-to-empty

display may indicate a sufficient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.



Significantly cold or hot temperatures.

Sudden changes in outside



temperature.

The vehicle is parked.

The vehicle is driven at low speeds.



The display will not change unless you

add more than approximately 9 L (2.3

US gal, 1.9 Imp gal) of fuel.

The distance-to-empty is the

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

indicating the remaining fuel supply

disappear.

Changing the Temperature Unit of the

Outside Temperature Display



The outside temperature unit can be

switched between Celsius and Fahrenheit.

Settings can be changed by operating the

center display screen.

Refer to the Settings section in the Mazda

Connect Owner's Manual.



If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

NOTE

When the temperature unit indicated in the

outside temperature display is changed,

the temperature unit indicated in the

engine coolant gauge display changes in

conjunction with it.

4-37

When Driving

Instrument Cluster and Display

Average Fuel Economy

Maintenance Monitor

▼

The average fuel economy is calculated

every minute from the total traveled

distance on the trip meter and the total fuel

consumption, and the average fuel

economy for either TRIP A or TRIP B is

displayed.

The following maintenance period

notifications can be displayed by turning

the Maintenance Monitor on.



Scheduled Maintenance

Tire Rotation



Oil Change

When the remaining days to the

maintenance period is 15 days or less, or

the remaining distance is 1,000 km (600

miles) or shorter, a message is indicated

when the ignition is switched ON.

The average fuel economy and trip meters

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode. After the data is cleared, the fuel

consumption is recalculated and the - - -

km/L (- - - mpg) for the 1 minute prior to

it being displayed is indicated.

For the setting method and indications for

the maintenance monitor, refer to the

Maintenance Monitor.

Refer to the Applications (Mazda Connect

(Type A))/Information (Mazda Connect

(Type B)) section in the Mazda Connect

Owner's Manual.

Current Fuel Economy

▼

This displays the current fuel economy by

calculating the amount of fuel

consumption and the distance traveled.

Blind Spot Monitoring (BSM)

Display^*

▼

Displays the system status.

NOTE

Indicates the 0 position when the vehicle

speed is about 5 km/h (3 mph) or slower.

Refer to Blind Spot Monitoring (BSM) on

page 4-125.

*Some models.

4-38

When Driving

Instrument Cluster and Display

Traffic Jam Assist (TJA) Display^*

Lane-keep Assist System (LAS) &

Lane Departure Warning System

(LDWS) Display^*

▼

Displays the currently set system status.

Displays the system status.

Refer to Traffic Jam Assist (TJA) on page

4-161.

Refer to Lane-keep Assist System (LAS)

& Lane Departure Warning System

(LDWS) on page 4-177.

Distance Recognition Support

System (DRSS) Display^*

▼

Displays the distance between your

vehicle and the vehicle ahead.

Mazda Radar Cruise Control with

Stop & Go function (MRCC with

Stop & Go function) Display^*

▼

Displays the currently set system status.

Refer to Distance Recognition Support

System (DRSS) on page 4-136.

Cruise Control Set Vehicle Speed

Display^*

▼

Refer to Mazda Radar Cruise Control with

Stop & Go function (MRCC with Stop &

Go function) on page 4-146.

The vehicle speed preset using the cruise

control is displayed.

Refer to Cruise Control on page 4-271.

*Some models.

4-39

When Driving

Instrument Cluster and Display

Refer to If a Message Indicated on

Compass Display

▼

Multi-information Display on page 7-37.

The direction the vehicle is moving is

displayed in one of eight directions while

the vehicle is being driven.

Display

N

Direction

North

S

South

E

East

W

West

NE

NW

SE

Northeast

Northwest

Southeast

Southwest

SW

Message Display

▼

A message such as the system operation

status, a malfunction, or an abnormality is

indicated.

Warning/indicator light in instrument

cluster turns on/flashes or symbol is

indicated on display at same time as

message

Check the information regarding the

warning/indicator light or indicated

symbol.

Refer to If a Warning Indication/Warning

Lights on page 4-41.

Refer to If a Indication/Indicator Lights on

page 4-43.

Message only is indicated on display

Follow the instructions indicated on the

display. For the display content, refer to

the next page.

4-40

When Driving

Instrument Cluster and Display

Warning/Indicator Lights

▼

Instrument Cluster varies depending on model and specifications.

Instrument Cluster

Center of Dashboard

Warning lights will appear in any of the highlighted areas

Warning Indication/Warning Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Warning

Page

*1*2

7-22

Brake System Warning Indication/Warning Light

Electronic Brake

Force Distribu‐

tion System

Warning

*1

ABS Warning Light

7-22

ABS warning

7-25

*1

7-22

Charging System Warning Indication/Warning Light

*1

Engine Oil Warning Light

*1

7-22

High Engine Coolant Temperature Warning Light

(Red)

Power Steering Malfunction Indication

4-41

When Driving

Instrument Cluster and Display

Signal

Warning

Page

Master Warning Indication/Warning Light

7-25

*1

7-25

Electric Parking Brake (EPB) Warning Indication/Warning Light

*1

Check Engine Light

Automatic Transaxle Warning Indication

7-25

*

AWD Warning Indication

*1

7-25

Air Bag/Seat Belt Pretensioner System Warning Light

Flashing

7-25

*1

Tire Pressure Monitoring System Warning Light

Turns on

7-31

Amber

7-25

KEY Warning Indication

White

7-31

(Amber/White)

(Amber)

*

*1

7-25

High Beam Control System (HBC) Warning Indication/Warning Light

*

Blind Spot Monitoring (BSM) Warning Indication

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) Warning Indication

(Amber)

*

7-25

Traffic Jam Assist (TJA) Warning Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

(LDWS) Warning Indication

*1

LED Headlight Warning Light

*

Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning In‐

7-31

dication

Low Fuel Warning Indication

*1

Check Fuel Cap Warning Indication/Warning Light

*Some models.

4-42

When Driving

Instrument Cluster and Display

Signal

Warning

Page

*1

7-31

Engine Oil Level Warning Light

Seat Belt Warning Light (Front seat)

Seat Belt Warning Light (Rear seat)

7-31

(Red)

*

7-31

Low Washer Fluid Level Warning Indication

Door-Ajar Warning Indication

Liftgate-Ajar Warning Indication

7-31

*

1

2

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

Authorized Mazda Dealer.

The light turns on continuously when the parking brake is applied.

Indication/Indicator Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Indicator

Seat Belt Indicator Light (Rear seat)

Page

2-30

(Green)

*

*1

2-72

Front Passenger Air Bag Deactivation Indicator Light

*1

3-43

4-46

Security Indicator Light

Wrench Indication

Low Engine Coolant Temperature Indicator Light

4-46

(Blue)

*Some models.

4-43

When Driving

Instrument Cluster and Display

Signal

Indicator

Page

Shift Position Indication

4-63

Lights-On Indication/Indicator Light

Headlight High-Beam Indicator Light

4-72

Headlight

High-Low Beam

4-76

Flashing the

Headlights

4-76

Turn and

Lane-Change

Signals

4-79

Turn Signal/Hazard Warning Indicator Lights

Hazard Warning

Flasher

4-87

*1

4-102

4-157

4-176

AUTOHOLD Active Indicator Light

*

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) indicator Light

*

Traffic Jam Assist (TJA) indicator Light

Traction Control

System (TCS)

4-107

Dynamic Stabili‐

ty Control

(DSC)

*1

TCS/DSC Indicator Light

4-109

Turns on

7-25

*

*1

4-107

TCS OFF Indicator Light

*1

4-110

4-112

Off-Road Traction Assist Indicator Light

Select Mode Indication

*

4-123

High Beam Control System (HBC) Indicator Light

(Green)

*Some models.

4-44

When Driving

Instrument Cluster and Display

Signal

Indicator

Page

Malfunction

7-25

*

*1

Blind Spot Monitoring (BSM) OFF Indicator Light

Except malfunc‐

tion

4-129

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

4-151

4-169

4-151

4-169

4-179

& Go function) Main Indication

(White)

(Green)

*

Traffic Jam Assist (TJA) Main Indication

*

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) Set Indication

*

Traffic Jam Assist (TJA) Set Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

(LDWS) Indication

*

Lane-keep Assist System (LAS) & Lane Departure Warning System

4-189

*1

(LDWS) OFF Indicator Light

Advanced Smart

City Brake Sup‐

port (Advanced

SCBS)

*

4-193

Smart City Brake Support (SCBS) Indication

Smart City

Brake Support

(SCBS)

4-196

Advanced Smart

City Brake Sup‐

port (Advanced

SCBS)

4-193

Smart City

Brake Support

(SCBS)

*

Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indica‐

*1

tor Light

4-196

Smart Brake

Support (SBS)

System

4-203

*

4-272

Cruise Main Indication

(White)

*Some models.

4-45

When Driving

Instrument Cluster and Display

Signal

Indicator

Page

*

4-272

Cruise Set Indication

(Green)

*

1 The light turns on when the ignition is switched on for an operation check, and turns off

a few seconds later or when the engine is started. If the light does not turn on or remains

turned on, have the vehicle inspected at an Authorized Mazda Dealer.

Wrench Indication

Low Engine Coolant Temperature

Indicator Light (Blue)

▼

The wrench indication is displayed under

the following conditions.

The light illuminates continuously when

the engine coolant temperature is low and

turns off after the engine is warm.



When the preset maintenance period has

arrived.

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.



When the engine oil replacement period

has arrived.

NOTE



The wrench indication may display

earlier than the preset period depending

on vehicle usage conditions.

Whenever the engine oil is replaced, a



reset of the vehicle engine control unit is

necessary.

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.

*Some models.

4-46

When Driving

Instrument Cluster and Display

Instrument Cluster (Type C)

① Speedometer..........................................................................................................page 4-47

② Tachometer............................................................................................................page 4-47

③ Multi-information Display (Type C).....................................................................page 4-48

④ Dashboard Illumination.........................................................................................page 4-50

NOTE

Speedometer

▼

When the tachometer needle enters the

STRIPED ZONE, this indicates to the

driver that the gears should be shifted

before entering the RED ZONE.

The speedometer indicates the speed of the

vehicle.

Tachometer

▼

The tachometer shows engine speed in

thousands of revolutions per minute (rpm).

CAUTION

Do not run the engine with the tachometer

needle in the RED ZONE.

This may cause severe engine damage.

1

*

STRIPED

ZONE

1

*

RED ZONE

¹The range varies depending on the type

*

of gauge.

4-47

When Driving

Instrument Cluster and Display

Multi-information Display (Type C)

▼

Multi-information Display (Type C)

INFO switch

The multi-information display indicates the following information.



Odometer

Trip meter

Engine coolant temperature gauge

Fuel gauge

Outside temperature

Trip Computer

Cruise Control Display

Compass Display



Dashboard illumination knob

Odometer, Trip Meter and Trip

Meter Selector

▼

The display mode can be changed from

odometer to trip meter A to trip meter B

and then back to odometer by pressing the

selector while one of them is displayed.

The selected mode will be displayed.

Odometer

Press the dashboard

illumination knob

Trip meter A

Press the dashboard

illumination knob

Trip meter B

Press the dashboard

illumination knob

4-48

When Driving

Instrument Cluster and Display

Odometer

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.

The odometer records the total distance

the vehicle has been driven.



Trip meter

Only the trip meters record tenths of

kilometers (miles).

The trip record will be erased when:

The trip meter can record the total distance

of two trips. One is recorded in trip meter

A, and the other is recorded in trip meter

B.



The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9 km



For instance, trip meter A can record the

distance from the point of origin, and trip

meter B can record the distance from

where the fuel tank is filled.

(mile).

Engine Coolant Temperature Gauge

▼

Displays the engine coolant temperature.

The white range of the gauge indicates

that the engine coolant temperature is low,

and the red range of the gauge indicates

that the engine coolant temperature is high

and overheating.

When trip meter A is selected, pressing the

selector again within 1 second will change

to trip meter B mode.

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

The trip meter records the total distance

the vehicle is driven until the meter is

again reset. Return it to “0.0” by

depressing and holding the selector for 1

second or more. Use this meter to measure

trip distances and to compute fuel

consumption.

CAUTION

If the engine coolant temperature gauge

needle (white) ﬂashes, there is a possibility

of overheating. Drive slowly to reduce

engine load until you can ﬁnd a safe place

to stop the vehicle and wait for the engine

to cool down.

NOTE



If TRIP A is reset using the trip meter

when the function which synchronizes

(resets) the fuel economy monitor and

the trip meter (TRIP A) is on, the fuel

economy data resets in conjunction with

TRIP A.

Refer to Overheating on page 7-17.

4-49

When Driving

Instrument Cluster and Display

NOTE

If inconsistency in engine performance or

stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.



(SKYACTIV-G 2.5T)

If the engine coolant temperature is high

or the engine is hot, the engine output

may be limited.

Refer to Taking Action on page 7-31.



The temperature unit (Centigrade/

NOTE

Fahrenheit) of the engine coolant gauge

display changes in conjunction with the

temperature unit of the outside

temperature display.

Refer to the Settings section in the

Mazda Connect Owner's Manual.



After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving

on a slope or curve since the fuel moves

in the tank.



The display indicating a quarter or less

Fuel Gauge

▼

remaining fuel has more segments to

show the remaining fuel level in greater

detail.

The fuel gauge shows approximately how

much fuel is remaining in the tank when

the ignition is switched ON. We



The direction of the arrow ( ) indicates

that the fuel-filler lid is on the left side

of the vehicle.

recommend keeping the tank over 1/4 full.

Full

Dashboard Illumination

▼

(Without auto-light control)

When the lights are turned on with the

ignition switched ON, the brightness of

the dashboard illumination is dimmed.

(With auto-light control)

When the lights are turned on with the

ignition switched ON, the brightness of

the dashboard illumination is dimmed.

However, when the light sensor detects

that the surrounding area is bright such as

when the lights are turned on in the

daytime, the dashboard illumination does

not dim.

1/4 Full

Empty

NOTE



(With auto-light control)

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

4-50

When Driving

Instrument Cluster and Display

NOTE

When the ignition is switched ON in the

early evening or at dusk, the dashboard

illumination is dimmed for several

seconds until the light sensor detects the

brightness of the surrounding area,

however, the dimming may cancel after

the brightness is detected.

When the lights are turned on, the

lights-on indicator light in the

instrument cluster turns on.



When the illumination dimmer is

canceled, the instrument cluster cannot

be dimmed even if the lights are turned

on.



When the illumination dimmer is

canceled, the screen in the center

display switches to constant display of

the daytime screen.



Outside Temperature Display

Refer to Headlights on page 4-72.

▼

The brightness of the instrument cluster

and dashboard illuminations can be

adjusted by rotating the knob.

When the ignition is switched ON, the

outside temperature is displayed.



The brightness decreases by rotating the

knob to the left. A beep sound will be

heard when the knob has been rotated to

the maximum dim position.

The brightness increases by rotating the

knob to the right.

NOTE



Under the following conditions, the



outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:

Dim



Significantly cold or hot temperatures.

Sudden changes in outside



temperature.

The vehicle is parked.

The vehicle is driven at low speeds.

Bright



Changing the Temperature Unit of the

Outside Temperature Display

Function for canceling illumination

dimmer

The outside temperature unit can be

switched between Celsius and Fahrenheit.

Settings can be changed by operating the

center display screen.

Refer to the Settings section in the Mazda

Connect Owner's Manual.

The illumination dimmer can be canceled

by rotating the dashboard illumination

knob to the right until a beep sound is

heard while the instrument cluster is

dimmed with the ignition switched ON. If

the instrument cluster's visibility is

reduced due to glare from surrounding

brightness, cancel the illumination

dimmer.

4-51

When Driving

Instrument Cluster and Display



NOTE

The display may not change unless you

add more than approximately 9 L (2.3

US gal, 1.9 Imp gal) of fuel.

When the temperature unit indicated in the

outside temperature display is changed,

the temperature unit indicated in the

engine coolant gauge display changes in

conjunction with it.

The distance-to-empty is the

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

(indicating the remaining fuel supply)

disappear.

If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

Trip Computer

▼

The following information can be selected

by pressing the INFO switch with the

ignition switched ON.



Distance-to-empty mode

Average fuel economy mode

Current fuel economy mode

Compass mode



If you have any problems with your trip

computer, consult an Authorized Mazda

Dealer.

Average fuel economy mode

This mode displays the average fuel

economy by calculating the total traveled

distance and the total fuel consumption

since the vehicle was purchased or the past

data was reset. The average fuel economy

is calculated and displayed every minute.

Distance-to-empty mode

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

The distance-to-empty will be calculated

and displayed every second.

To reset the displayed past data, press the

INFO switch for 1.5 seconds or longer.

After resetting the data, - - - L/100 km

(- - - mpg) is displayed for one minute

before the fuel economy is recalculated

and displayed.

NOTE



Even though the distance-to-empty

display may indicate a sufficient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.

NOTE

If TRIP A is reset using the trip meter

when the function which synchronizes

(resets) the fuel economy monitor and the

trip meter (TRIP A) is on, the displayed

past data is reset.

4-52

When Driving

Instrument Cluster and Display

Current fuel economy mode

Display

N

Direction

North

This mode displays the current fuel

economy by calculating the amount of fuel

consumption and the distance traveled.

S

South

E

East

W

West

Current fuel economy will be calculated

and displayed every 2 seconds.

NE

NW

SE

Northeast

Northwest

Southeast

Southwest

SW

Cruise Control Set Vehicle Speed

Display

▼

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

The vehicle speed preset using the cruise

control is displayed.

Compass mode

The direction the vehicle is moving is

displayed in one of eight directions while

the vehicle is being driven.

Refer to Cruise Control on page 4-271.

4-53

When Driving

Instrument Cluster and Display

Warning/Indicator Lights

▼

Instrument Cluster varies depending on model and specifications.

Instrument Cluster

Center of Dashboard

Warning lights will appear in any of the highlighted areas

Warning Indication/Warning Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Warning

Page

*1*2

7-22

Brake System Warning Light

Electronic Brake

Force Distribu‐

tion System

Warning

*1

ABS Warning Light

7-22

ABS warning

7-25

*1

7-22

Charging System Warning Light

*1

Engine Oil Warning Light

*1

Power Steering Malfunction Indicator Light

*1

7-25

Master Warning Light

*1

Electric Parking Brake (EPB) Warning Light

4-54

When Driving

Instrument Cluster and Display

Signal

Warning

Page

Flashing

4-100

*1

Brake Pedal Operation Demand Warning Light

Buzzer & Flash‐

ing

(Red)

7-25

*1

7-25

Check Engine Light

*1

Automatic Transaxle Warning Light

*1

7-25

Air Bag/Seat Belt Pretensioner System Warning Light

Flashing

7-25

*1

Tire Pressure Monitoring System Warning Light

Turns on

7-31

Turns on

7-25

*1

KEY Warning Light

Flashing

7-31

(Red)

*1

7-25

LED Headlight Warning Light

*

*1

7-31

Smart City Brake Support (SCBS) Warning Light

(Amber)

Low Fuel Warning Light

7-31

*1

Check Fuel Cap Warning Light

*1

7-31

Engine Oil Level Warning Light

Seat Belt Warning Light (Front seat)

Seat Belt Warning Light (Rear seat)

7-31

(Red)

*

Low Washer Fluid Level Warning Light

Door-Ajar Warning Light

*

1

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

Authorized Mazda Dealer.

*Some models.

4-55

When Driving

Instrument Cluster and Display

*

2

The light turns on continuously when the parking brake is applied.

Indication/Indicator Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Indicator

Seat Belt Indicator Light (Rear seat)

Page

2-30

(Green)

*

*1

2-72

4-5

Front Passenger Air Bag Deactivation Indicator Light

KEY Indicator Light

(Green)

*1

3-43

4-57

Security Indicator Light

*1

Wrench Indication/Indicator Light

Shift Position Indication

4-63

Lights-On Indication/Indicator Light

Headlight High-Beam Indicator Light

4-72

Headlight

High-Low Beam

4-76

Flashing the

Headlights

4-76

Turn and

Lane-Change

Signals

4-79

Turn Signal/Hazard Warning Indicator Lights

Brake Pedal Operation demand Indicator Light

Hazard Warning

Flasher

4-87

4-97

(Green)

*1

4-102

AUTOHOLD Active Indicator Light

*Some models.

4-56

When Driving

Instrument Cluster and Display

Signal

Indicator

Page

Traction Control

System (TCS)

4-107

Dynamic Stabil‐

ity Control

(DSC)

*1

TCS/DSC Indicator Light

4-109

Turns on

7-25

*

*1

4-107

4-112

TCS OFF Indicator Light

Select Mode Indication

Malfunction

7-25

*

*1

Blind Spot Monitoring (BSM) OFF Indicator Light

Except malfunc‐

tion

4-129

*

4-196

4-272

Smart City Brake Support (SCBS) Indicator Light

(Red)

*1

Smart City Brake Support (SCBS) OFF Indicator Light

Cruise Main Indication

Cruise Set Indication

(White)

(Green)

4-272

*

1 The light turns on when the ignition is switched on for an operation check, and turns off

a few seconds later or when the engine is started. If the light does not turn on or remains

turned on, have the vehicle inspected at an Authorized Mazda Dealer.

When the ignition is switched ON, the

wrench indicator light turns on and then

turns off after a few seconds.

Wrench Indicator Light

▼

The wrench indicator light turns on under

the following conditions:



When the preset maintenance period has

arrived.

*Some models.

4-57

When Driving

Instrument Cluster and Display



When it’s time to replace the engine oil.

Refer to the Applications (Mazda Connect

(Type A))/Information (Mazda Connect

(Type B)) section in the Mazda Connect

Owner's Manual.

NOTE



The wrench indicator light turns on

earlier than the preset period depending

on vehicle usage conditions.

Whenever the engine oil is replaced, a



reset of the vehicle engine control unit is

necessary.

Refer to the Applications (Mazda

Connect (Type A))/Information (Mazda

Connect (Type B)) section in the Mazda

Connect Owner's Manual.

4-58

When Driving

Instrument Cluster and Display

Active Driving Display^*

Dust-proof sheet

Display

Optical

receiver

WARNING

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as doing

so could distract your attention from the road ahead and lead to an accident.

CAUTION

Do not place beverages near the active driving display. If water or other liquids are splashed

on the active driving display, it could cause damage.

Do not place objects above the active driving display or apply stickers to the dust-proof

sheet/optical receiver as they will cause interference.

A sensor is integrated to control the display's luminosity. If the optical receiver is covered,

the display's luminosity will lower making the display diﬃcult to view.

Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

NOTE



Wearing polarized sunglasses will reduce the visibility of the active driving display due to

the characteristics of the display.

If the battery has been removed and re-installed or the battery voltage is low, the adjusted



position may deviate.



The display may be difficult to view or temporarily affected by weather conditions such as

rain, snow, light, and temperature.

If the audio system is removed, the active driving display cannot be operated.



The active driving display indicates the following information:

*Some models.

4-59

When Driving

Instrument Cluster and Display



Blind Spot Monitoring (BSM) Operation Conditions and Warnings

Refer to Blind Spot Monitoring (BSM) on page 4-125.



Traffic Sign Recognition System (TSR) traffic signs and Warnings

Refer to Traffic Sign Recognition System (TSR) on page 4-130.



Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)

Operation Conditions and Warnings

Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) on page 4-146.



Traffic Jam Assist (TJA) Operation Conditions and Warnings

Refer to Traffic Jam Assist (TJA) on page 4-161.



Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Operation

Conditions and Warnings

Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) on

page 4-177.



Advanced Smart City Brake Support (Advanced SCBS) Warnings

Refer to Advanced Smart City Brake Support (Advanced SCBS) on page 4-191.



Smart City Brake Support [Forward] (SCBS F) Warnings

Refer to Smart City Brake Support [Forward] (SCBS F) on page 4-194.



Smart Brake Support (SBS) Operation Conditions and Warnings

Refer to Smart Brake Support (SBS) on page 4-202.



Cruise Control Operation Conditions

Refer to Cruise Control on page 4-271.



Navigation Guidance (vehicles with navigation system)



Speed limit indicator (vehicles with navigation system)



Vehicle Speed

The active driving display settings can be changed or adjusted.

Refer to the Settings section in the Mazda Connect Owner's Manual.

NOTE



The desired driving position (display position, brightness level, display information) can

be called up after programming the position.

Refer to Driving Position Memory on page 2-11.

4-60

When Driving -> Instrument Cluster and Display for Your Mazda Cx-5 SUV 2023

Popular Manuals