When Driving -> Mazda intelligent Drive Select for Your Mazda Cx-5 SUV 2023

When Driving  
Mazda intelligent Drive Select (Mi-Drive)  
Always drive the vehicle safely. Do not  
drive the vehicle recklessly, otherwise it  
may result in an accident.  
Use Off-road mode when driving on  
slippery roads such as muddy, sandy, or  
deep-snowy roads. During normal  
driving, use normal mode.  
Mazda intelligent Drive  
Select (Mi-Drive)  
Mazda intelligent Drive Select  
(Mi-Drive)  
Mi-drive is a system that switches the  
drive modes depending on the driving  
conditions, road conditions and vehicle  
conditions.  
CAUTION  
The mode can be switched from normal to  
sport or off-road.  
Do not use the sport mode when driving  
on slippery roads such as wet or  
snow-covered roads. It may cause tire  
slipping.  
Heed the following cautions so that the  
system can operate normally.  
Sport mode  
This mode enhances vehicle  
responsiveness when the accelerator pedal  
is depressed.  
Always use tires of the specified size,  
same manufacturer, brand, and  
pattern (tread pattern) for the front  
and rear wheels.  
This provides additional quick  
acceleration which may be needed to  
safely make maneuvers such as lane  
changes, merging onto freeways, or  
passing other vehicles.  
Do not use tires with significantly  
different wear patterns on the same  
vehicle.  
Drive carefully when using tire chains.  
Because the diameter of the tires differs,  
the system may not operate normally.  
*
Off-road mode  
This mode helps prevent drive-wheel  
spinning during off-road driving and  
improves driving performance.  
And this mode also assists in freeing tires  
that are stuck.  
Use this mode to drive the vehicle on  
slippery roads such as muddy, sandy, or  
deep-snowy roads.  
Warnings and cautions when using  
Mi-Drive  
WARNING  
Do not rely completely on the Mi-Drive  
system.  
Vehicle stability is limited even when  
Mi-drive is activated.  
*Some models.  
4-112  
When Driving  
Mazda intelligent Drive Select (Mi-Drive)  
How to use Mi-Drive  
Type A  
Type B  
1. Press the Mi-Drive switch forward  
(SPORT) to select the sport mode.  
1. Push the Mi-Drive switch forward or  
pull it toward you.  
2. Instrument Cluster (Type A)  
When the drive mode is set, the display  
in the instrument cluster changes.  
Refer to Mazda intelligent Drive Select  
(Mi-Drive) Display on page 4-21.  
Instrument Cluster (Type B/C)  
When the sport mode is selected, the  
select mode indication turns on in the  
instrument cluster.  
2. While checking the list displayed in  
the instrument cluster, push the  
Mi-Drive switch forward or pull it  
toward you to select a drive mode.  
3. Pull the Mi-Drive switch back (OFF)  
to cancel the sport mode.  
NOTE  
When the drive mode is set, the display  
in the instrument cluster changes.  
Refer to Mazda intelligent Drive Select  
(Mi-Drive) Display on page 4-21.  
Depending on the driving conditions  
when sport mode is selected, the vehicle  
may perform shift-down or slightly  
accelerate.  
When the sport mode is selected, driving  
at higher engine speeds increases and it  
may increase fuel consumption. Mazda  
recommends that you cancel the sport  
mode on normal driving.  
Instrument Cluster (Type A)  
The driving mode in which the display in  
the instrument cluster is grayed out  
cannot be selected.  
4-113  
When Driving  
Mazda intelligent Drive Select (Mi-Drive)  
When the ignition is switched OFF, the  
mode returns to normal mode.  
In the following cases, the sport mode is  
canceled.  
The ignition is switched OFF.  
Mazda Radar Cruise Control (MRCC)  
system/cruise control is set.  
Traffic Jam Assist (TJA) is set.  
The vehicle may vibrate or you might  
hear an operation sound while the  
Off-road mode is operating or is  
operational, however, this does not  
indicate a problem.  
4-114