2023 Mercedes C Class 4 Door Display messages and warning/indicator lamps User Manual

MY CAR USER MANUAL

Display messages and warning/indicator lamps for Your Mercedes C Class 4 Door 2023

Display messages and warning/indicator lamps  
806  
Display messages to be acknowledged can be hid-  
den by pressing the back button G or with the  
leꢀ-hand Touch Control. The display messages will  
then be stored in the message memory.  
Display messages  
Introduction  
▌Information about display messages  
Display messages appear on the driver's display.  
Rectify the cause of a display message as quickly  
as possible.  
High-priority display messages cannot be hidden.  
The driver's display will show these display mes-  
sages continuously until the cause of the display  
message has been rectified.  
Display messages with graphical symbols are sim-  
plified in the Owner's Manual and may differ from  
the symbols on the driver's display. The driver's  
display shows high-priority display messages in  
red. Certain display messages are accompanied  
by a warning tone.  
Please act in accordance with the display mes-  
sages and follow the additional notes in the Own-  
er's Manual.  
▌Calling up saved display messages  
Driver's display:  
4
Service  
The Message memory: XXmessage appears on  
For some display messages, symbols will also be  
shown:  
the driver's display.  
#
Scroll through the display messages by swip-  
ing upwards or downwards on the leꢀ-hand  
R
Õ Further information  
R
¨ Hide display message  
Touch Control.  
With the leꢀ-hand Touch Control, you can select  
the respective symbol by swiping to the leꢀ or  
right. Pressing Õ displays further information on  
the central display. Press the ¨ symbol to hide  
the display message.  
#
To exit the display: press the G back but-  
ton.  
F206 0105 02  
Display messages and warning/indicator lamps  
807  
Occupant safety  
Display messages  
Possible causes/consequences and M Solutions  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Restraint system malfunc-  
tion Consult workshop  
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In  
the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical  
system.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
Recognition of a restraint system fault:  
R
the 6 restraint system warning lamp does not light up when the vehicle is switched on  
R
the 6 restraint system warning lamp lights up continuously or repeatedly during a journey  
F206 0105 02  
Display messages and warning/indicator lamps  
808  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Front left malfunction Con-  
sult workshop  
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In  
the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical  
system.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
Recognition of a restraint system fault:  
R
the 6 restraint system warning lamp does not light up when the vehicle is switched on  
R
the 6 restraint system warning lamp lights up continuously or repeatedly during a journey  
F206 0105 02  
Display messages and warning/indicator lamps  
809  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Front right malfunction  
Consult workshop  
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In  
the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical  
system.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
Recognition of a restraint system fault:  
R
the 6 restraint system warning lamp does not light up when the vehicle is switched on  
R
the 6 restraint system warning lamp lights up continuously or repeatedly during a journey  
F206 0105 02  
Display messages and warning/indicator lamps  
810  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Second row of seats, left  
Malfunction Consult work-  
shop  
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In  
the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical  
system.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
Recognition of a restraint system fault:  
R
the 6 restraint system warning lamp does not light up when the vehicle is switched on  
R
the 6 restraint system warning lamp lights up continuously or repeatedly during a journey  
F206 0105 02  
Display messages and warning/indicator lamps  
811  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Second row of seats, right  
Malfunction Consult work-  
shop  
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In  
the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical  
system.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
Recognition of a restraint system fault:  
R
the 6 restraint system warning lamp does not light up when the vehicle is switched on  
R
the 6 restraint system warning lamp lights up continuously or repeatedly during a journey  
F206 0105 02  
Display messages and warning/indicator lamps  
812  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury or fatal injury due to a malfunction in the windowbag  
The windowbag might be triggered unintentionally or might not be triggered at all in the event of an accident.  
#
Left window airbag mal-  
function Consult workshop  
Have the windowbag checked and repaired immediately at a qualified specialist workshop.  
#
Consult a qualified specialist workshop immediately.  
* The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury or fatal injury due to a malfunction in the windowbag  
The windowbag might be triggered unintentionally or might not be triggered at all in the event of an accident.  
#
Right window airbag mal-  
function Consult workshop  
Have the windowbag checked and repaired immediately at a qualified specialist workshop.  
#
Consult a qualified specialist workshop immediately.  
Front passenger airbag dis-  
abled See Owner's Manual  
* The front passenger airbag has been disabled even though an adult or a person of adult build is on the front passenger  
seat. If additional forces are applied to the seat, the weight the system detects may be too low.  
F206 0105 02  
Display messages and warning/indicator lamps  
813  
Display messages  
Possible causes/consequences and M Solutions  
&
WARNING ‑ Risk of injury or even fatal injury when the front passenger airbag is disabled  
If the front passenger airbag is disabled, It will not be deployed in the event of an accident and cannot perform its  
intended protective function.  
A person in the front passenger seat could then, for example, come into contact with the vehicle interior, especially  
if the person is sitting too close to the dashboard.  
#
Be aware of the status of the front passenger airbag both before and during the journey.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
Make sure that no objects are trapped under the front passenger seat.  
Check the status of automatic front passenger airbag shutoff (/ page 104).  
If necessary, consult a qualified specialist workshop immediately.  
#
#
#
Front passenger airbag ena-  
bled See Owner's Manual  
* The front passenger airbag will be enabled while the vehicle is in motion in the following situations:  
R
even when a child, a small adult or an object weighing less than the system weight threshold is located on the front  
passenger seat  
R
even when the front passenger seat is not occupied  
The system may detect objects or forces that are adding to the weight applied to the seat.  
F206 0105 02  
Display messages and warning/indicator lamps  
814  
Display messages  
Possible causes/consequences and M Solutions  
&
WARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena-  
bled  
If you secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena-  
bled, the front passenger airbag can deploy in the event of an accident.  
The child could be struck by the airbag.  
#
Ensure, both before and during the journey, that the status of the front passenger airbag is correct.  
NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or  
SERIOUS INJURY to the CHILD can occur.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
Make sure that no objects are trapped under the front passenger seat.  
Check the status of automatic front passenger airbag shutoff (/ page 104).  
If necessary, consult a qualified specialist workshop immediately.  
#
#
#
Occupant presence  
reminder inoperative  
* The occupant presence reminder is malfunctioning  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
815  
Display messages  
Possible causes/consequences and M Solutions  
* The occupant presence reminder suspects that there are persons or animals in the rear of the vehicle.  
#
Do not leave any persons or animals behind when leaving the vehicle.  
æ
Do not leave persons or  
animals in the vehicle  
Key  
Display messages  
Possible causes/consequences and M Solutions  
* Have the key replaced.  
#
Consult a qualified specialist workshop.  
®
Replace key  
* The key battery is discharged.  
#
Replace the battery (/ page 144).  
®
Change key batteries  
F206 0105 02  
Display messages and warning/indicator lamps  
816  
Display messages  
Possible causes/consequences and M Solutions  
* The key is currently undetected.  
#
Change the location of the key in the vehicle.  
Try to start the vehicle.  
If the key is still not detected, place it in the slot for starting with the key (/ page 264).  
®
#
Key not detected (white dis-  
#
play message)  
#
Start the vehicle.  
* The key can no longer be detected during a journey and may no longer be in the vehicle.  
If the key is no longer in the vehicle and you switch off the vehicle:  
®
R
You can no longer start the vehicle.  
Key not detected (red dis-  
R
You cannot centrally lock the vehicle.  
play message)  
#
Ensure that the key is in the vehicle.  
If the key is in the vehicle and is still not detected:  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
#
Place the key in the slot for starting the engine with the key (/ page 264).  
The key battery is weak or discharged.  
#
Check the battery using the indicator lamp (/ page 142).  
#
Replace the key battery, if necessary (/ page 144).  
F206 0105 02  
Display messages and warning/indicator lamps  
817  
Display messages  
Possible causes/consequences and M Solutions  
* The vehicle is processing in order to teach in the new key.  
#
Wait until processing is complete.  
®
Key being taught in Please  
wait  
Place the key in the  
marked space See Owner's  
Manual  
* Key detection is malfunctioning.  
#
Change the location of the key in the vehicle.  
#
Place the key in the slot for starting the engine with the key (/ page 264).  
Searching for key in stow-  
age tray or Digital Vehicle  
Key in inductive charging  
bracket… See Owner's  
Manual  
* The key has not been detected.  
#
Place the key in the stowage compartment (/ page 264).  
If the key is still not detected:  
#
Consult a qualified specialist workshop.  
* The Digital Vehicle Key has not been detected.  
#
Place the Digital Vehicle Key in the stowage space (/ page 262).  
If the Digital Vehicle Key is still not detected:  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
818  
Display messages  
Possible causes/consequences and M Solutions  
* The key or the Digital Vehicle Key is currently undetected.  
#
Change the location of the key or the Digital Vehicle Key in the vehicle.  
Try to start the vehicle.  
If the key is still not detected, place the key in the stowage compartment (/ page 264).  
õ
#
Key not detected  
#
#
If the Digital Vehicle Key is still not detected, place the Digital Vehicle Key in the stowage space (/ page 262).  
#
Start the vehicle.  
* The key or the Digital Vehicle Key are no longer detected during a journey and may no longer be in the vehicle.  
If the key or the Digital Vehicle Key is no longer in the vehicle and you switch off the vehicle:  
õ
R
You can no longer start the vehicle.  
Key not detected Place Dig-  
ital Vehicle Key in induc-  
tive charging bracket  
R
You cannot centrally lock the vehicle.  
#
Ensure that the key or the Digital Vehicle Key is in the vehicle.  
If the key or the Digital Vehicle Key is in the vehicle and is still not detected:  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
#
Place the key in the stowage compartment (/ page 264).  
#
Place the Digital Vehicle Key in the stowage space (/ page 262).  
The key battery is weak or discharged.  
#
Check the battery using the indicator lamp (/ page 142).  
F206 0105 02  
Display messages and warning/indicator lamps  
819  
Display messages  
Possible causes/consequences and M Solutions  
#
Replace the key battery, if necessary (/ page 144).  
The charge status of the rechargeable battery of the end device with the Digital Vehicle Key is too low.  
#
Immediately charge the rechargeable battery of the Digital Vehicle Key end device.  
Otherwise, it may not be possible to restart the vehicle aꢀer it has been switched off.  
If the key or the Digital Vehicle Key is still not detected:  
#
Consult a qualified specialist workshop.  
* If the Digital Vehicle Key is not renewed, the vehicle cannot be unlocked/locked or started.  
#
The system automatically renews the Digital Vehicle Key.  
When the renewal is complete, the message disappears and the Digital Vehicle Key is available again.  
í
Replace key See Owner's  
Manual  
* A warning tone will also sound. This message reminds you to take your key with you when you leave the vehicle. This  
also applies to the Digital Vehicle Key.  
õ
Do not forget key  
F206 0105 02  
Display messages and warning/indicator lamps  
820  
Display messages  
Possible causes/consequences and M Solutions  
* The charge status of the rechargeable battery of the end device with the Digital Vehicle Key is too low.  
#
Immediately charge the rechargeable battery of the Digital Vehicle Key end device.  
í
Digital Vehicle Key Charge  
device  
* The vehicle is processing in order to teach in the new Digital Vehicle Key.  
#
Wait until processing is complete.  
õ
Key being taught in Please  
wait  
* The vehicle cannot be unlocked/locked or started.  
#
Use the Digital Vehicle Key belonging to the vehicle.  
í
Key does not belong to  
vehicle  
F206 0105 02  
Display messages and warning/indicator lamps  
821  
Lights  
Display messages  
Possible causes/consequences and M Solutions  
* The exterior lighting is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
* Vehicles with a trailer hitch: a fuse may have blown.  
#
Malfunction See Owner's  
Manual  
Stop the vehicle in accordance with the traffic conditions.  
Check the fuses and replace them if necessary (/ page 59).  
#
* The light sensor for automatic driving lights is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Automatic driving lights  
inoperative  
* You are driving without low-beam headlamps.  
#
Turn the light switch to the L or à position.  
:
Switch on headlamps  
F206 0105 02  
Display messages and warning/indicator lamps  
822  
Display messages  
Possible causes/consequences and M Solutions  
* You are leaving the vehicle and the lights are still switched on.  
#
Turn the light switch to the à position.  
:
Switch off lights  
DIGITAL LIGHT Functions  
* The DIGITAL LIGHT system is malfunctioning. The lighting system will continue to work even without the functions of  
the DIGITAL LIGHT system.  
limited  
#
Consult a qualified specialist workshop.  
Check low beam setting  
(left/right-side traffic)  
* The type of traffic has been selected manually.  
#
Check the setting and change it manually if necessary (/ page 231).  
Low beam setting (left/  
right-side traffic) Manual  
adjustment only  
* The automatic headlamp conversion for leꢀ-hand/right-hand traffic has malfunctioned.  
#
Change the headlamps over manually (/ page 231).  
Adaptive Highbeam Assist  
currently unavailable See  
Owner's Manual  
* Adaptive Highbeam Assist is temporarily unavailable.  
The system limits have been reached (/ page 228).  
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam  
Assist available again display message will appear.  
#
Drive on  
#
Operate the high beam manually until Adaptive High Beam Assist is available again.  
F206 0105 02  
Display messages and warning/indicator lamps  
823  
Display messages  
Possible causes/consequences and M Solutions  
Adaptive Highbeam Assist  
inoperative  
* Adaptive Highbeam Assist is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
#
Until then, operate the high beam manually.  
Adaptive Highbeam Assist  
Plus currently unavailable  
See Owner's Manual  
* Adaptive Highbeam Assist Plus is temporarily unavailable.  
The system limits have been reached (/ page 229).  
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam  
Assist Plus available again display message will appear.  
#
Drive on  
#
Operate the high beam manually until Adaptive High Beam Assist Plus is available again.  
Adaptive Highbeam Assist  
Plus inoperative  
* Adaptive Highbeam Assist Plus is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
#
Until then, operate the high beam manually.  
F206 0105 02  
Display messages and warning/indicator lamps  
824  
Display messages  
Possible causes/consequences and M Solutions  
Hazard warning lamp sys-  
tem Malfunction  
* The hazard warning lamp switch is malfunctioning.  
#
Consult a qualified specialist workshop.  
* The front leꢀ parking light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Front left parking lights  
* The front right parking light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Front right parking lights  
* The leꢀ low beam is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left low beam  
* The right low beam is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right low beam  
F206 0105 02  
Display messages and warning/indicator lamps  
825  
Display messages  
Possible causes/consequences and M Solutions  
* The leꢀ high beam is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left main beam  
* The right high beam is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right main beam  
* The leꢀ daytime running lights are malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left daytime running lights  
* The right-hand daytime running lights are malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right daytime running lights  
F206 0105 02  
Display messages and warning/indicator lamps  
826  
Display messages  
Possible causes/consequences and M Solutions  
* The leꢀ cornering light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left cornering light  
* The right cornering light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right cornering light  
* The front leꢀ turn signal lamp is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Front left turn signal  
* The rear leꢀ turn signal lamp is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Rear left turn signal  
F206 0105 02  
Display messages and warning/indicator lamps  
827  
Display messages  
Possible causes/consequences and M Solutions  
* The front right turn signal lamp is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Front right turn signal  
* The rear right turn signal lamp is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Rear right turn signal  
* The turn signal lamp on the leꢀ mirror is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left mirror turn signal  
* The turn signal lamp on the right mirror is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right mirror turn signal  
F206 0105 02  
Display messages and warning/indicator lamps  
828  
Display messages  
Possible causes/consequences and M Solutions  
* The leꢀ brake light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left brake lamp  
* The right brake light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right brake lamp  
* The third brake light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Third brake lamp  
* The leꢀ tail light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Left tail light  
F206 0105 02  
Display messages and warning/indicator lamps  
829  
Display messages  
Possible causes/consequences and M Solutions  
* The right tail light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Right tail light  
* The reversing light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Reversing light  
* The rear fog light is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Rear fog light  
* The number plate lamp is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Number plate lamp  
F206 0105 02  
Display messages and warning/indicator lamps  
830  
Display messages  
Possible causes/consequences and M Solutions  
* The leꢀ turn signal lamp on the trailer is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Trailer left turn signal  
* The right turn signal lamp on the trailer is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Trailer right turn signal  
* The brake light on the trailer is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Trailer brake lamp  
* A tail light on the trailer is malfunctioning.  
#
Consult a qualified specialist workshop.  
:
Trailer tail light  
F206 0105 02  
Display messages and warning/indicator lamps  
831  
Display messages  
Possible causes/consequences and M Solutions  
Inoperative indicator lamp  
in driver display. Consult  
workshop  
* An indicator lamp on the driver's display is defective.  
#
Consult a qualified specialist workshop.  
Climate control  
Display messages  
Possible causes/consequences and M Solutions  
* The stationary heater is temporarily malfunctioning.  
#
When the vehicle is stationary on a level surface and the engine has cooled down, make up to four attempts to  
switch on the stationary heater, waiting several minutes between each attempt.  
If the stationary heater does not switch on, consult a qualified specialist workshop.  
&
#
inoperative See Owner's  
Man. (stationary heater)  
%
The stationary heater cannot be activated if the outside temperature is above 15°C.  
* The on-board electrical system voltage is too low.  
The stationary heater has switched itself off.  
&
#
Drive an extended distance until the battery has reached a sufficient charge level again.  
Currently unavailable Bat-  
tery low  
F206 0105 02  
Display messages and warning/indicator lamps  
832  
Display messages  
Possible causes/consequences and M Solutions  
* There is too little fuel in the fuel tank. The stationary heater cannot be switched on.  
#
Refuel the vehicle.  
&
Currently unavailable Refuel  
* The high-voltage battery is charging. Pre-entry climate control cannot be switched on.  
#
Wait until the charging process has achieved a minimum state of charge.  
&
Currently unavailable High-  
voltage battery charging  
incomplete.  
* The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on.  
#
Charge the high-voltage battery (/ page 306).  
&
Currently unavailable  
Charge high-voltage battery  
F206 0105 02  
Display messages and warning/indicator lamps  
833  
Display messages  
Possible causes/consequences and M Solutions  
* You have attempted to switch on pre-entry climate control more than twice with the vehicle switched off.  
#
Start the vehicle for ten seconds.  
Pre-entry climate control is operational again.  
&
Pre-entry climate control  
via key available again  
after starting vehicle  
* The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on.  
#
Charge the high-voltage battery (/ page 306).  
When the high-voltage battery is sufficiently charged, pre-entry climate control will be operational again.  
&
Pre-entry climate control  
via key currently unavaila-  
ble. High-voltage battery  
low  
F206 0105 02  
Display messages and warning/indicator lamps  
834  
Drive system  
Display messages  
Possible causes/consequences and M Solutions  
* The drive system is malfunctioning.  
#
Have the vehicle transported only using a transporter or trailer (/ page 644, 643).  
u
Towing not permitted See  
Owner's Manual  
* The sound generator (acoustic vehicle warning system) is malfunctioning. No vehicle noises are being produced. The  
vehicle may not be heard by other road users.  
ò
#
Drive with particular care.  
#
Acoustic presence indica-  
tor inoperative  
Consult a qualified specialist workshop.  
* You cannot pull away while the charging cable is connected.  
#
Disconnect the charging cable from the vehicle.  
è
Charger cable connected  
Not possible to unlock  
charging cable See Own-  
er's Manual  
* The charging cable connector cannot be removed from the charging station's socket.  
#
Press the EMERGENCY OFF switch on the charging station.  
If the charging cable connector cannot be removed aꢀer that:  
F206 0105 02  
Display messages and warning/indicator lamps  
835  
Display messages  
Possible causes/consequences and M Solutions  
#
Request service personnel from the operator of the charging station via the emergency call button or the emer-  
gency numbers attached to the charging station.  
Vehicle not currently being  
charged Charging station  
fault  
* A malfunction has occurred in the charging station or the RFID card is not recognised.  
#
Start the charging process at a different charging station.  
or  
#
Have the RFID card checked to ensure it is functioning.  
Charging fault Please  
change charging method  
See Owner's Manual  
* A temporary malfunction has occurred in the charging station.  
#
Wait until the malfunction has passed.  
or  
#
Start the charging process at a different charging station.  
AC charging inoperative  
Consult workshop  
* The charging process cannot be started due to a malfunction.  
#
Consult a qualified specialist workshop.  
DC charging inoperative  
Consult workshop  
* The charging process cannot be started due to a malfunction.  
#
Consult a qualified specialist workshop.  
Only electric drive availa-  
ble Power limited  
* The fuel tank is empty and the combustion engine is switched off. The output of your vehicle is limited because you  
are driving in electric mode.  
F206 0105 02  
Display messages and warning/indicator lamps  
836  
Display messages  
Possible causes/consequences and M Solutions  
#
Refuel immediately.  
Subsequently, there may be temporary restrictions in the availability of electric mode over a driving distance of  
50 km.  
If there is fuel in the vehicle, there is a fault with the combustion engine.  
#
Consult a qualified specialist workshop.  
"Electric" drive program  
currently unavailable  
* The state of charge of the high-voltage battery is not sufficient for the Electric drive program.  
Charge the high-voltage battery (/ page 306).  
Reduced drive system per-  
formance See Owner's  
Manual  
* The drive system switches to emergency operation mode due to a malfunction.  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
Preparing drive system…  
* The insulation of the drive system is being tested. This process can last for up to ten seconds.  
* Plug-in hybrid: the high-voltage battery is overheated. There is a risk of fire.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
If possible, stop the vehicle in the open air and ensure that all vehicle occupants get out.  
Û
#
Battery overheated Stop,  
everybody out! Outdoors if  
possible  
%
#
Supporting vehicle functions may activate automatically, e.g. air-recirculation mode as part of climate control.  
Do not continue driving.  
#
If smoke is present, leave the danger zone and call the fire service immediately.  
F206 0105 02  
Display messages and warning/indicator lamps  
837  
Display messages  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop even if there are no external signs of a fire.  
* The drive system is malfunctioning. A warning tone will also sound.  
#
Consult a qualified specialist workshop.  
Û
Malfunction  
* The drive system is malfunctioning.  
#
Consult a qualified specialist workshop.  
Û
Malfunction Visit workshop  
* A function restriction has occurred in the drive system.  
#
Consult a qualified specialist workshop.  
Û
Have high-voltage system  
checked See Owner's Man-  
ual  
Consult workshop without  
changing the transmission  
position  
* The transmission is malfunctioning. It is no longer possible to change the transmission position.  
#
If transmission position h is selected, consult a qualified specialist workshop and do not change the transmission  
position.  
F206 0105 02  
Display messages and warning/indicator lamps  
838  
Display messages  
Possible causes/consequences and M Solutions  
#
For all other transmission positions, park the vehicle safely.  
#
Consult a qualified specialist workshop.  
Consult workshop without  
starting the vehicle again  
* It is not possible to restart the drive system due to a malfunction.  
#
Do not switch off the drive system; drive on to the nearest qualified specialist workshop.  
* A malfunction has occurred in the high-voltage battery.  
Output and range will be severely restricted.  
Û
#
Switch the vehicle off and lock it.  
Output and range reduced  
See Owner's Manual  
#
Aꢀer waiting for a short time, unlock the vehicle and start it again.  
If the display message appears again:  
#
Drive on carefully.  
#
Fully charge the high-voltage battery (/ page 306).  
If the output and range are still reduced, there is a malfunction in the drive system.  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
Cannot start vehicle See  
Owner's Manual  
* It is not possible to start the vehicle.  
A malfunction has occurred in the drive system.  
#
Switch the vehicle off and lock it.  
F206 0105 02  
Display messages and warning/indicator lamps  
839  
Display messages  
Possible causes/consequences and M Solutions  
#
Aꢀer waiting for a short time, unlock the vehicle and start it again.  
#
If the display message appears again and the vehicle does not start, consult a qualified specialist workshop.  
Drive malfunction Achieva-  
ble speed limited Stop soon  
* The drive system is malfunctioning.  
The maximum vehicle speed is restricted. The drive system will shut off within a few kilometres.  
#
Stop the vehicle immediately in accordance with the traffic conditions and switch off the drive system. Do not con-  
tinue driving.  
#
#
Do not tow the vehicle; stop towing if necessary.  
Consult a qualified specialist workshop.  
Drive malfunction Achieva-  
ble speed severely limited  
See Owner's Manual  
* The drive system is malfunctioning.  
The maximum vehicle speed is restricted.  
#
Consult a qualified specialist workshop.  
* The drive system is malfunctioning. The output of your vehicle is restricted.  
#
Consult a qualified specialist workshop.  
d
Malfunction  
F206 0105 02  
Display messages and warning/indicator lamps  
840  
Display messages  
Possible causes/consequences and M Solutions  
* The drive system is malfunctioning.  
#
Stop the vehicle immediately in accordance with the traffic conditions and switch off the drive system. Do not con-  
d
tinue driving.  
#
Stop Switch off the vehicle  
Do not tow the vehicle; stop towing if necessary.  
Consult a qualified specialist workshop.  
#
* The drive system is outside the normal operating temperature range, e.g. due to extremely low or high outside temper-  
atures.  
The output is severely restricted.  
Once the operating temperature of the drive system returns to normal, the full output will be available again. The dis-  
play message will disappear.  
d
Performance severely limi-  
ted  
* If the drive system power output is still reduced, there is a fault in the drive system.  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
High-voltage battery mal-  
function. No start in  
approx. XXX km Consult  
workshop (yellow display  
message)  
* A malfunction has occurred in the high-voltage battery.  
It will no longer be possible to start the electric drive system aꢀer the distance displayed has been covered.  
It is still possible to start the combustion engine.  
#
Have the necessary maintenance work on the high-voltage battery carried out at a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
841  
Display messages  
Possible causes/consequences and M Solutions  
High-voltage battery mal-  
function. No start in  
approx. XXX km Consult  
workshop (red display mes-  
sage)  
* A malfunction has occurred in the high-voltage battery.  
It will no longer be possible to start the electric drive system aꢀer the distance displayed has been covered.  
It is still possible to start the combustion engine.  
#
Have the necessary maintenance work on the high-voltage battery carried out immediately at a qualified specialist  
workshop.  
High-voltage battery mal-  
function. Consult work-  
shop without starting the  
vehicle again  
* A malfunction has occurred in the high-voltage battery.  
It will no longer be possible to restart the drive system once it has been switched off.  
#
Do not switch off the drive system; drive on to the nearest qualified specialist workshop.  
* Vehicles with petrol engines: the pressure in the fuel tank is reduced before the fuel filler flap is opened. This pressure  
reduction can take up to 15 minutes.  
6
Please wait Depressurising  
fuel tank  
* Vehicles with petrol engines: the pressure in the fuel tank is released and the fuel filler flap opens.  
6
Fuel tank is depressurised  
Ready for refuelling  
F206 0105 02  
Display messages and warning/indicator lamps  
842  
Vehicle  
Display messages  
Possible causes/consequences and M Solutions  
* The driver's display is inoperative due to a failed soꢀware update.  
The display message will be shown every time the engine is started.  
&
WARNING Risk of accident if the driver display fails  
If the driver display has failed or is malfunctioning, function restrictions in systems relevant to safety cannot be  
detected.  
The operating safety of your vehicle may be impaired.  
#
Drive on carefully.  
#
Have the vehicle checked immediately at a qualified specialist workshop.  
If the operating safety of your vehicle is impaired, park the vehicle immediately and safely. Contact a qualified special-  
ist workshop.  
Plug-in hybrid:  
&
WARNING Risk of accident due to failure of the driver display  
In the event that the driver display fails or malfunctions, you will not recognise function restrictions affecting sys-  
tems relevant to safety. This may impair operating safety.  
#
Park the vehicle safely as soon as possible and notify a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
843  
Display messages  
Possible causes/consequences and M Solutions  
If the driver's display fails, you may not recognise function restrictions affecting systems relevant to safety or the  
speed display, for example. The operating safety of the vehicle may be impaired (/ page 491).  
#
Have the vehicle checked by a qualified specialist workshop immediately.  
Cannot start vehicle See  
Owner's Manual  
* The vehicle cannot be started.  
#
Switch the vehicle off and switch it back on  
#
If the display message still appears, consult a qualified specialist workshop.  
* Vehicles with 48 V on-board electrical system: the state of charge of the 48 V battery is too low. You can no longer  
start the vehicle.  
#
Switch off electrical consumers that are not required.  
#
Connect a suitable charger approved for Mercedes-Benz with sufficient charge output to the jump-start connection  
point of the 12 V battery (/ page 57).  
The 48 V battery is charged via the voltage converter in the vehicle.  
* Mercedes-AMG vehicles with plug-in hybrid: the charging cable is inserted.  
#
Disconnect the charging cable from the vehicle.  
* Mercedes-AMG vehicles with plug-in hybrid: the charging cable is not inserted.  
#
Switch off the vehicle for five to ten minutes.  
#
Switch on the vehicle.  
#
If the display message still appears, consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
844  
Display messages  
Possible causes/consequences and M Solutions  
Vehicle is ready to drive  
Shutdown occurs when  
locked or automatically in  
a few minutes  
* You are leaving the vehicle in a ready-to-drive state.  
#
Get out of the vehicle, secure it against rolling away and take the key with you.  
#
If you do not leave the vehicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the 12 V  
battery may discharge and starting the engine may be possible only with the help of a second battery (jump start).  
Vehicle is ready to drive  
Shutdown occurs when  
locked or automatically in  
XX mins  
* You are about to leave the vehicle and the engine is running.  
The vehicle will switch off automatically in 20 minutes.  
#
To prevent the vehicle from switching off automatically, acknowledge the message on the central display of the  
multimedia system.  
* You are in the vehicle. Park position j is engaged and the engine is running.  
Aꢀer a certain holding time, this display message will appear on the driver display. The vehicle will then switch off  
automatically aꢀer a total of 20 minutes of holding time.  
#
To prevent the vehicle from switching off automatically, acknowledge the message on the central display of the  
multimedia system.  
* The trailer hitch is not operational during a journey with a trailer.  
ï
&
WARNING Risk of an accident if the ball neck is not locked  
The trailer may become detached.  
#
Trailer coupling Check  
lock (white display message)  
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
#
Uncouple the trailer and secure it against rolling away.  
F206 0105 02  
Display messages and warning/indicator lamps  
845  
Display messages  
Possible causes/consequences and M Solutions  
#
Initiate a new swivelling procedure and do not re-couple the trailer until the display message disappears.  
#
#
#
#
Stop immediately in accordance with the traffic conditions and switch off the vehicle.  
Uncouple the trailer and secure it against rolling away.  
Initiate a new swivel movement (/ page 44).  
When the display message disappears, couple up the trailer and drive on.  
If the display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not locked.  
#
Do not couple up the trailer. Drive on without the trailer. Note the reduced ground clearance due to the unlocked  
ball neck.  
#
Consult a qualified specialist workshop.  
* When the vehicle is stationary with a coupled trailer, the trailer hitch is not operational.  
#
Uncouple the coupled trailer and secure it against rolling away.  
#
If the ball neck has been folded in: unlock the ball neck (/ page 44).  
#
Swivel the ball neck into the end position manually and let it engage.  
#
If the ball neck has been folded out: unlock the ball neck (/ page 44).  
#
Swivel the ball neck beneath the bumper manually and let it engage.  
If the display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not locked.  
F206 0105 02  
Display messages and warning/indicator lamps  
846  
Display messages  
Possible causes/consequences and M Solutions  
#
Do not couple up the trailer. Drive on without the trailer. Note the reduced ground clearance due to the unlocked  
ball neck.  
#
Consult a qualified specialist workshop.  
* The trailer hitch is not operational during a journey with a trailer.  
ï
&
WARNING Risk of an accident if the ball neck is not locked  
The trailer may become detached.  
#
Trailer coupling Check  
lock(red display message)  
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
#
Uncouple the trailer and secure it against rolling away.  
#
Initiate a new swivelling procedure and do not re-couple the trailer until the display message disappears.  
#
Stop immediately in accordance with the traffic conditions and switch off the vehicle.  
Uncouple the trailer and secure it against rolling away.  
Initiate a new swivel movement (/ page 44).  
#
#
#
When the display message disappears, couple up the trailer and drive on.  
If the display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not locked.  
#
Do not couple up the trailer. Drive on without the trailer. Note the reduced ground clearance due to the unlocked  
ball neck.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
847  
Display messages  
Possible causes/consequences and M Solutions  
* When the vehicle is stationary with a coupled trailer, the trailer hitch is not operational.  
#
Uncouple the coupled trailer and secure it against rolling away.  
#
If the ball neck has been folded in: unlock the ball neck (/ page 44).  
#
Swivel the ball neck into the end position manually and let it engage.  
#
If the ball neck has been folded out: unlock the ball neck (/ page 44).  
#
Swivel the ball neck beneath the bumper manually and let it engage.  
If the display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not locked.  
#
Do not couple up the trailer. Drive on without the trailer. Note the reduced ground clearance due to the unlocked  
ball neck.  
#
Consult a qualified specialist workshop.  
Head-up display currently  
unavailable See Owner's  
Manual  
* The head-up display is temporarily unavailable. Possible causes:  
R
malfunctions in the power supply  
R
signal interference  
#
Stop in accordance with the traffic conditions and switch the vehicle off and on again.  
#
If the display message still appears, consult a qualified specialist workshop.  
Head-up display inoperative  
* The head-up display has an internal error.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
848  
Display messages  
Possible causes/consequences and M Solutions  
Head-up display Brightness  
currently reduced See Own-  
er's Manual  
* The brightness of the head-up display is reduced. Possible causes:  
R
Dirt on the windscreen in the camera's field of vision  
R
Faulty exterior brightness signals  
#
Switch on the windscreen wipers.  
#
Clean the windscreen if necessary.  
#
Switch the vehicle off and switch it back on  
#
If the display message still appears, consult a qualified specialist workshop.  
* A power steering malfunction has occurred. Steering characteristics may be impaired as a result.  
#
Drive on carefully.  
Consult a qualified specialist workshop.  
Ù
#
Steering malfunction Drive  
carefully Visit workshop  
* The power steering assistance is malfunctioning.  
Ù
&
WARNING Risk of an accident due to altered steering characteristics  
If the power assistance of the steering fails partially or completely, you will need to use more force to steer.  
#
Steering malfunction  
Increased physical effort  
See Owner's Manual  
If safe steering is possible, drive on carefully.  
Visit or consult a qualified specialist workshop immediately.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
849  
Display messages  
Possible causes/consequences and M Solutions  
#
If safe steering is possible, drive on carefully.  
#
Visit or consult a qualified specialist workshop immediately.  
* The steering is malfunctioning. Steering capability is significantly impaired.  
Ù
&
WARNING Risk of accident if steering capability is impaired  
If the steering does not function as intended, the vehicle's operating safety is jeopardised.  
#
Steering malfunction Stop  
immediately See Owner's  
Manual  
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do  
not continue driving under any circumstances.  
#
Consult a qualified specialist workshop.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Consult a qualified specialist workshop.  
#
* The rear-axle steering is temporarily unavailable. The turning circle may become wider.  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
Ù
If the display message does not disappear:  
#
Rear axle steering cur-  
rently malfunctioning  
Drive on carefully.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
850  
Display messages  
Possible causes/consequences and M Solutions  
* The rear axle steering is malfunctioning.  
The rear axle has no steering capability.  
The steering wheel may be at an angle when you drive in a straight line.  
Ù
Rear axle steering Malfunc-  
tion Visit workshop  
#
Adapt your speed and drive on carefully.  
#
Consult a qualified specialist workshop immediately.  
* The rear axle steering is malfunctioning.  
The rear axle has no steering capability.  
The steering wheel may be at an angle when you drive in a straight line.  
Ù
Rear axle steering Malfunc-  
tion Stop immediately  
&
WARNING Risk of accident if steering capability is impaired  
If the steering does not function as intended, the vehicle's operating safety is jeopardised.  
#
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do  
not continue driving under any circumstances.  
#
Consult a qualified specialist workshop.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Consult a qualified specialist workshop.  
#
Electronic rear axle differ-  
ential lock inoperative  
* The electronic locking differential has failed.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
851  
Display messages  
Possible causes/consequences and M Solutions  
Electronic rear axle differ-  
ential lock currently  
unavailable  
* The electronic locking differential is overheated.  
#
Let the electronic locking differential cool down by driving defensively.  
Active bonnet malfunction  
See Owner's Manual  
* The active bonnet (pedestrian protection) is malfunctioning or inoperative aꢀer having already been triggered.  
#
Consult a qualified specialist workshop.  
Ambient light warning sup-  
port inoperative  
* The ambient lighting may not provide full visual warning support.  
#
Lock the vehicle and unlock it again aꢀer a few minutes.  
#
If the display message appears regularly, contact a qualified specialist workshop.  
* At least one door is open.  
#
Close all doors.  
C
M
* The bonnet is open.  
&
WARNING Risk of accident due to driving with the bonnet unlocked  
The bonnet may open and block your view.  
#
Never release the bonnet when driving.  
#
Before every trip, ensure that the engine bonnet is locked.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
F206 0105 02  
Display messages and warning/indicator lamps  
852  
Display messages  
Possible causes/consequences and M Solutions  
#
Close the bonnet.  
* The boot lid is open.  
N
&
DANGER Risk of exhaust gas poisoning  
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter the vehicle  
interior if the boot lid is open when the engine is running, especially if the vehicle is in motion.  
#
Always switch off the engine before opening the boot lid.  
#
Never drive with the boot lid open.  
#
Close the boot lid.  
Function blocked as centre  
backrest is folded down  
* You cannot electrically unlock the leꢀ seat backrest.  
#
Fold the centre seat backrest back until it engages.  
* The seat backrest of the corresponding seat is not engaged.  
#
Fold the seat backrest back until it engages.  
_
Rear left seat backrest not  
locked  
F206 0105 02  
Display messages and warning/indicator lamps  
853  
Display messages  
Possible causes/consequences and M Solutions  
* The seat backrest of the corresponding seat is not engaged.  
#
Fold the seat backrest back until it engages.  
_
Rear right seat backrest  
not locked  
* The washer fluid level in the washer fluid reservoir has dropped below the minimum.  
#
Top up the washer fluid (/ page 29).  
¥
Top up washer fluid  
Wiper Malfunction  
* The windscreen wiper is malfunctioning.  
#
Restart the vehicle.  
If the display message still appears:  
#
Consult a qualified specialist workshop.  
4matic currently unavaila-  
ble  
* 4MATIC is currently unavailable.  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
4matic inoperative  
* 4MATIC is inoperative.  
F206 0105 02  
Display messages and warning/indicator lamps  
854  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
Engine  
Display messages  
Possible causes/consequences and M Solutions  
To switch off the vehicle,  
press the Start/Stop but-  
ton for at least 3 seconds  
or 3 times  
* You have pressed the start/stop button while the vehicle is in motion.  
#
Information about switching off the vehicle while driving (/ page 261).  
* The coolant level is too low.  
+
*
NOTE Engine damage due to insufficient coolant  
Avoid long journeys with insufficient coolant.  
#
Top up coolant See Own-  
er’s Manual  
#
#
Add coolant (/ page 615).  
Have the engine cooling system checked at a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
855  
Display messages  
Possible causes/consequences and M Solutions  
* The coolant is too hot.  
#
Stop immediately in accordance with the traffic conditions and switch off the vehicle.  
ÿ
Coolant Stop Switch off  
the vehicle  
&
WARNING Risk of burns when opening the bonnet  
If you open the bonnet in the event of an overheated engine or fire in the engine compartment, the following situa-  
tions may occur:  
R
You may come into contact with hot gases.  
R
You may come into contact with other escaping hot operating fluids.  
#
Before opening the bonnet, allow the engine to cool down.  
#
In the event of a fire in the engine compartment, keep the bonnet closed and call the fire service.  
#
Wait until the engine has cooled down.  
#
#
Make sure that the air supply to the radiator is not obstructed.  
Avoiding high loads on the engine, drive to the nearest qualified specialist workshop. In doing so, ensure that the  
coolant temperature display remains below 120°C.  
* Vehicles with diesel engines: the fuel filter is dirty or the water in the fuel filter needs to be drained.  
#
Consult a qualified specialist workshop.  
!
Clean the fuel filter  
F206 0105 02  
Display messages and warning/indicator lamps  
856  
Display messages  
Possible causes/consequences and M Solutions  
* Vehicles with diesel engines: the engine air filter is dirty and must be replaced.  
#
Consult a qualified specialist workshop.  
ý
Replace air filter  
Reserve fuel  
* The fuel supply has dropped into the reserve range.  
#
Refuel.  
Transmission  
Display messages  
Possible causes/consequences and M Solutions  
Only select P when vehicle  
is stationary  
* It is possible to select the park position j only if the vehicle is stationary.  
#
Depress the brake pedal to stop.  
#
Shiꢀ the transmission to park position j when the vehicle is stationary.  
Apply brake to deselect P  
position  
* You have attempted to shiꢀ the transmission out of park position j and into another transmission position.  
#
Depress the brake pedal.  
#
Select transmission position h, k or neutral i.  
Apply brake and start vehi-  
cle to shift out of P or N  
* You have attempted to shiꢀ the transmission out of park position j or neutral i and into another transmission posi-  
tion.  
F206 0105 02  
Display messages and warning/indicator lamps  
857  
Display messages  
Possible causes/consequences and M Solutions  
#
Depress the brake pedal.  
#
Start the vehicle.  
#
Change the transmission position.  
Apply brake to engage D or  
R
* You have attempted to select transmission position h or k.  
#
Depress the brake pedal.  
#
Select transmission position h or k.  
Apply brake to engage R  
* You have attempted to select transmission position k.  
#
Depress the brake pedal.  
#
Select transmission position k.  
Apply parking brake to  
park Visit workshop  
* A malfunction has occurred in the emergency power supply to park position j.  
#
Consult a qualified specialist workshop.  
#
Until then, always select park position j manually before you switch off the vehicle.  
#
Before leaving the vehicle, apply the electric parking brake.  
Risk of vehicle rolling away  
Driver's door open Trans-  
mission not in P  
* The driver's door is not fully closed and transmission position h, k or neutral i is selected.  
The vehicle may roll away.  
#
Select park position j when switching off the vehicle.  
F206 0105 02  
Display messages and warning/indicator lamps  
858  
Display messages  
Possible causes/consequences and M Solutions  
Risk of vehicle rolling away  
Apply parking brake to park  
* The transmission is malfunctioning. Park position j cannot be selected.  
#
Park the vehicle safely.  
#
Use the electric parking brake to secure the vehicle against rolling away.  
#
On gradients, turn the front wheels so that the vehicle will roll towards the kerb if it starts moving.  
Risk of vehicle rolling away  
N activated manually No  
automatic switch to P  
* While the vehicle was at a standstill or driving at very low speed, neutral i was engaged with the engine running or  
the vehicle switched on.  
*
NOTE Damage to the vehicle due to rolling away  
When the vehicle is switched off or the driver's door is opened, automatic engagement of park position j is deac-  
tivated.  
The vehicle may roll away.  
#
Be ready to brake.  
#
Do not leave the vehicle unattended.  
#
Depress the brake pedal until the vehicle comes to a standstill.  
#
#
Engage park position j when the vehicle is stationary with the brake pedal depressed.  
To continue driving with the brake pedal depressed, select transmission position h or k.  
F206 0105 02  
Display messages and warning/indicator lamps  
859  
Display messages  
Possible causes/consequences and M Solutions  
* Neutral i was automatically engaged when the vehicle was rolling or being driven.  
N automatically activated  
Please engage transmis-  
sion position again  
%
#
When you open the driver's door in neutral i, park position j will be engaged automatically.  
Engage park position j when the vehicle is stationary with the brake pedal depressed.  
To continue driving with the brake pedal depressed, select transmission position h or k.  
#
Reversing not poss. Con-  
sult workshop  
* The transmission is malfunctioning. It is not possible to select transmission position k.  
#
Consult a qualified specialist workshop.  
Transmission Malfunction  
Stop  
* The transmission is malfunctioning. The transmission shiꢀs to neutral i automatically.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
#
Depress the brake pedal.  
#
Engage park position j.  
#
Consult a qualified specialist workshop.  
Consult workshop without  
changing the transmission  
position  
* The transmission is malfunctioning. It is no longer possible to change the transmission position.  
#
If transmission position h is selected, consult a qualified specialist workshop and do not change the transmission  
position.  
#
#
For all other transmission positions, park the vehicle safely.  
Consult a qualified specialist workshop.  
Drive malfunction Stop  
Restart vehicle  
* The transmission is malfunctioning.  
F206 0105 02  
Display messages and warning/indicator lamps  
860  
Display messages  
Possible causes/consequences and M Solutions  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
#
Restart the vehicle.  
If the display message still appears:  
#
Consult a qualified specialist workshop.  
Drive malfunction Stop  
Consult workshop  
* The transmission is malfunctioning.  
#
Stop the vehicle immediately in a safe location and do not continue driving.  
#
Consult a qualified specialist workshop.  
Drive overheated. Drive on  
with care  
* The transmission is overheating. When the display message is active, start-up and driving characteristics may be tem-  
porarily impaired.  
#
Drive at low engine speed.  
#
Avoid sporty driving.  
#
Before pulling away on uphill gradients, let the transmission cool down until the display message disappears.  
Auxiliary battery malfunc-  
tion (white display message)  
* There is a malfunction in the auxiliary battery.  
#
Consult a qualified specialist workshop.  
#
Until then, always select park position j manually before you switch off the vehicle.  
#
Before leaving the vehicle, apply the electric parking brake.  
F206 0105 02  
Display messages and warning/indicator lamps  
861  
Display messages  
Possible causes/consequences and M Solutions  
Auxiliary battery malfunc-  
tion (red display message)  
* There is a malfunction in the auxiliary battery.  
#
Consult a qualified specialist workshop.  
#
Until then, always select park position j manually before you switch off the vehicle.  
#
Before leaving the vehicle, apply the electric parking brake.  
Brakes  
Display messages  
Possible causes/consequences and M Solutions  
* The yellow ! indicator lamp is lit. The electric parking brake is malfunctioning.  
To apply:  
!
#
Switch the vehicle off and switch it back on  
Parking brake See Owner's  
Manual  
#
Apply the electric parking brake manually (/ page 330).  
If it is not possible to apply the electric parking brake:  
#
Consult a qualified specialist workshop.  
#
Where necessary, also secure the parked vehicle against rolling away.  
* The yellow ! indicator lamp and the red ! indicator lamp are lit. The electric parking brake is malfunctioning.  
To release:  
#
Switch the vehicle off and switch it back on  
F206 0105 02  
Display messages and warning/indicator lamps  
862  
Display messages  
Possible causes/consequences and M Solutions  
#
Release the electric parking brake manually (/ page 330).  
or  
#
Release the electric parking brake automatically (/ page 330).  
If it is still not possible to release the electric parking brake:  
#
Do not continue driving. Consult a qualified specialist workshop.  
* The yellow ! indicator lamp is lit and the red ! indicator lamp is flashing. The electric parking brake is malfunc-  
tioning.  
The electric parking brake could not be applied or released.  
#
Switch the vehicle off and switch it back on  
To apply:  
#
Release and then apply the electric parking brake manually (/ page 330).  
To release:  
#
Apply and then release the electric parking brake manually.  
If it is not possible to apply the electric parking brake or the red ! indicator lamp continues to flash:  
#
Do not continue driving. Consult a qualified specialist workshop.  
#
Where necessary, also secure the parked vehicle against rolling away.  
F206 0105 02  
Display messages and warning/indicator lamps  
863  
Display messages  
Possible causes/consequences and M Solutions  
* The yellow ! indicator lamp is lit and the red ! indicator lamp flashes for approximately ten seconds aꢀer the  
electric parking brake has been applied or released. It then remains lit or goes out. The electric parking brake is mal-  
functioning.  
If the state of charge is too low:  
#
Charge the 12 V battery.  
To apply:  
#
Apply the electric parking brake manually.  
If it is not possible to apply the electric parking brake:  
#
Consult a qualified specialist workshop.  
#
Where necessary, also secure the parked vehicle against rolling away.  
To release:  
#
If the conditions for automatic release are fulfilled and the electric parking brake is not released automatically,  
release the electric parking brake manually (/ page 330).  
If it is still not possible to release the electric parking brake:  
#
Do not continue driving. Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
864  
Display messages  
Possible causes/consequences and M Solutions  
* The red ! indicator lamp is flashing.  
The electric parking brake is applied while you are driving:  
!
R
A condition for automatic release of the electric parking brake has not been fulfilled (/ page 330).  
Release parking brake  
R
You are performing emergency braking using the electric parking brake (/ page 331).  
#
Check the conditions for automatic release of the electric parking brake.  
#
Release the electric parking brake manually.  
* The red ! indicator lamp is lit.  
You have attempted to release the electric parking brake with the vehicle switched off.  
!
#
Switch on the vehicle.  
Parking brake Switch on  
vehicle to release  
* A malfunction has occurred while the HOLD function was activated.  
A horn may also sound at regular intervals.  
You cannot start the vehicle system.  
J
Brake immediately  
#
Immediately depress the brake pedal firmly until the display message disappears.  
You cannot start the vehicle system again.  
F206 0105 02  
Display messages and warning/indicator lamps  
865  
Display messages  
Possible causes/consequences and M Solutions  
* The brake force boosting function is impaired.  
The hill start assist may be impaired.  
J
&
WARNING Risk of an accident due to a brake system malfunction  
Malfunction See Owner's  
Manual  
If the brake system is malfunctioning, braking characteristics may be impaired.  
#
Drive on carefully.  
#
Have the brake system checked immediately at a qualified specialist workshop.  
#
Adjust your speed and drive on carefully, leaving a suitable distance to the vehicle in front.  
#
Consult a qualified specialist workshop.  
* The brake force boosting function is impaired and the braking characteristics may be affected.  
J
&
WARNING Risk of accident and injury if brake force boosting is malfunctioning  
If brake force boosting is malfunctioning, increased brake pedal force may be necessary for braking. The braking  
characteristics may be impaired. The braking distance can increase in emergency braking situations.  
Malfunction Stop vehicle  
#
Stop in a safe location immediately. Do not continue driving!  
#
Consult a qualified specialist workshop.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Consult a qualified specialist workshop.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
866  
Display messages  
Possible causes/consequences and M Solutions  
* There is insufficient brake fluid in the brake fluid reservoir.  
J
&
WARNING Risk of an accident due to low brake fluid level  
If the brake fluid level is too low, the braking effect and the braking characteristics may be impaired.  
#
Check brake fluid level  
Stop the vehicle as soon as possible, paying attention to road and traffic conditions. Do not continue driving.  
#
Consult a qualified specialist workshop.  
#
Do not top up the brake fluid.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Do not top up the brake fluid.  
Consult a qualified specialist workshop.  
#
#
Check brake pads See  
Owner's Manual  
* The brakepads have reached the wear limit.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
867  
Driving and driving safety systems  
Display messages  
Possible causes/consequences and M Solutions  
ABS and ESP® are temporarily unavailable.  
Other driving systems and driving safety systems (e.g. BAS) may also be temporarily unavailable.  
The brake system will continue to operate normally. Braking distance may increase in an emergency braking situation.  
*
!
÷
WARNING Risk of skidding if ABS and ESP® are malfunctioning  
&
The wheels may lock during braking and ESP® does not perform any vehicle stabilisation.  
The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi-  
tion, other driving safety systems are switched off.  
currently unavailable See  
Owner's Manual (ABS and  
ESP®)  
#
Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 30 km/h.  
#
If the display message does not disappear, consult a qualified specialist workshop immediately. Drive care-  
fully.  
#
Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 30 km/h.  
#
If the display message does not disappear, consult a qualified specialist workshop immediately. Drive carefully.  
F206 0105 02  
Display messages and warning/indicator lamps  
868  
Display messages  
Possible causes/consequences and M Solutions  
ABS and ESP® are malfunctioning.  
*
Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning.  
The brake system will continue to operate normally. Braking distance may increase in an emergency braking situation.  
!
WARNING Risk of skidding if ABS and ESP® are malfunctioning  
&
÷
The wheels may block during braking and ESP® does not perform any vehicle stabilization.  
The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi-  
tion, other driving safety systems are switched off.  
inoperative See Owner's  
Manual (ABS and ESP®)  
#
Drive on carefully.  
Have ABS and ESP® checked immediately at a qualified specialist workshop.  
#
#
Drive on carefully.  
#
Consult a qualified specialist workshop immediately.  
ESP® is temporarily unavailable.  
*
Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning.  
÷
WARNING Risk of skidding if ESP is malfunctioning®  
&
currently unavailable See  
Owner's Manual (ESP®)  
If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilisation. In addition, other driving safety systems are  
switched off.  
F206 0105 02  
Display messages and warning/indicator lamps  
869  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 30 km/h.  
#
If the display message does not disappear, consult a qualified specialist workshop immediately. Drive care-  
fully.  
#
#
Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 30 km/h.  
If the display message does not disappear, consult a qualified specialist workshop immediately. Drive carefully.  
ESP® is malfunctioning.  
*
Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning.  
The brake system will continue to operate normally. Braking distance may increase in an emergency braking situation.  
÷
inoperative See Owner's  
Manual (ESP®)  
WARNING Risk of skidding if ESP® is malfunctioning  
&
If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilisation. In addition, other driving safety systems are  
switched off.  
#
Drive on carefully.  
Have ESP® checked at a qualified specialist workshop.  
#
#
Drive on carefully.  
#
Consult a qualified specialist workshop immediately.  
F206 0105 02  
Display messages and warning/indicator lamps  
870  
Display messages  
Possible causes/consequences and M Solutions  
EBD, ABS and ESP® are malfunctioning.  
*
Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning.  
T
WARNING Risk of skidding if EBD, ABS and ESP® are malfunctioning  
&
The wheels may block during braking and ESP® does not perform any vehicle stabilization.  
The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi-  
tion, other driving safety systems are switched off.  
!
÷
#
Drive on carefully.  
#
Have the brake system checked immediately at a qualified specialist workshop.  
inoperative See Owner's  
Manual (EBD, ABS and  
ESP®)  
#
Drive on carefully.  
#
Consult a qualified specialist workshop immediately.  
* The HOLD function is deactivated because the vehicle is slipping or a condition for activation is not fulfilled.  
#
Reactivate the HOLD function later or check the activation conditions for the HOLD function (/ page 342).  
ë
Off  
F206 0105 02  
Display messages and warning/indicator lamps  
871  
Display messages  
Possible causes/consequences and M Solutions  
* ATTENTION ASSIST has detected fatigue or an increasing lack of concentration on the part of the driver  
(/ page 344).  
é
#
If necessary, take a break.  
ATTENTION ASSIST: Take a  
break!  
* Cruise control cannot be activated as not all activation conditions are fulfilled.  
#
Observe the activation conditions for cruise control (/ page 347).  
h
- - - km/h  
Cruise control inoperative  
* Cruise control is malfunctioning.  
#
Consult a qualified specialist workshop.  
Cruise control and Limiter  
inoperative  
* Cruise control and the limiter are malfunctioning.  
#
Consult a qualified specialist workshop.  
Cruise control off  
* Cruise control has been deactivated.  
If there is an additional warning tone, cruise control has been deactivated automatically (/ page 346).  
F206 0105 02  
Display messages and warning/indicator lamps  
872  
Display messages  
Possible causes/consequences and M Solutions  
* The limiter can temporarily not be engaged. Once the cause of the problem is no longer present, the system will be  
available again.  
È
- - - km/h  
* If you depress the accelerator pedal beyond the point of resistance (kickdown), the limiter will be switched to passive  
mode (/ page 346).  
È
passive  
Limiter inoperative  
* The limiter is malfunctioning.  
#
Consult a qualified specialist workshop.  
Speed Limit Assist cur-  
rently unavailable See Own-  
er's Manual  
* Speed Limit Assist is temporarily unavailable.  
#
Drive on  
Once the cause of the problem is no longer present, the system will be available again.  
Speed Limit Assist inopera-  
tive  
* Speed Limit Assist is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
873  
Display messages  
Possible causes/consequences and M Solutions  
Speed limit (winter tyres)  
XXX km/h  
* You have reached the maximum permissible stored speed for winter tyres. It is not possible to exceed this speed.  
* You have exceeded the maximum permissible speed (for certain countries only).  
#
Drive more slowly.  
ð
Maximum speed exceeded  
Traffic Sign Assist currently  
unavailable See Owner's  
Manual  
* Traffic Sign Assist is temporarily unavailable.  
Once the cause of the problem is no longer present, the system will be available again.  
#
Continue driving in compliance with the traffic regulations.  
Traffic Sign Assist inopera-  
tive  
* Traffic Sign Assist is malfunctioning.  
#
Continue driving in compliance with the traffic regulations.  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
874  
Display messages  
Possible causes/consequences and M Solutions  
* DYNAMIC BODY CONTROL is malfunctioning. The vehicle's handling characteristics may be affected.  
#
No faster than 80 km/h.  
Consult a qualified specialist workshop.  
ä
#
Fault Drive at max. 80  
km/h  
* AMG RIDE CONTROL is malfunctioning. The vehicle's handling characteristics may be affected.  
#
No faster than 80 km/h.  
Consult a qualified specialist workshop.  
ä
#
Fault Drive at max. 80  
km/h  
AMG Ride Control Function  
limited See Owner's Manual  
* The system is outside the operating temperature range or the on-board electrical system voltage is too low.  
Once the cause of the problem is no longer present, the system will be available again.  
*
NOTE The vehicle's suspension and damping behaviour is restricted. The vehicle body may tilt heavily to the  
side during cornering.  
#
#
#
Drive on carefully.  
Reduce speed considerably before taking a bend.  
Avoid sudden steering movements.  
F206 0105 02  
Display messages and warning/indicator lamps  
875  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive on carefully.  
#
Reduce speed considerably before taking a bend.  
#
Avoid sudden steering movements.  
* Plug-in hybrid:  
The rear axle level control is malfunctioning The vehicle's handling characteristics may be affected.  
ä
#
No faster than 80 km/h.  
Fault Drive at max. 80  
km/h  
#
Consult a qualified specialist workshop.  
RACE START not possible  
See Owner's Manual  
* Possible causes:  
R
The activation conditions have not been fulfilled (/ page 387).  
RACE START cancelled  
* Possible causes:  
R
you released the accelerator pedal during RACE START.  
R
you depressed the brake pedal during RACE START.  
#
You can try RACE START again at the next start.  
DRIFT MODE currently  
unavailable See Owner's  
Manual  
* Possible causes:  
R
The activation conditions have not been fulfilled (/ page 389).  
F206 0105 02  
Display messages and warning/indicator lamps  
876  
Driver assistance systems  
Display messages  
Possible causes/consequences and M Solutions  
* Active Distance Assist DISTRONIC cannot be activated as not all activation conditions are fulfilled.  
#
Comply with the activation conditions of Active Distance Assist DISTRONIC (/ page 352).  
ç
- - - km/h  
* If you depress the accelerator pedal beyond the setting of Active Distance Assist DISTRONIC, the system will switch to  
passive mode (/ page 349).  
ç
suspended  
* Active Distance Assist DISTRONIC was deactivated. If a warning tone also sounds, Active Distance Assist DISTRONIC  
has deactivated automatically (/ page 352).  
ç
Off  
Active Distance Assist cur-  
rently unavailable See Own-  
er's Manual  
* Active Distance Assist DISTRONIC is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 349).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
#
Drive on carefully.  
or  
F206 0105 02  
Display messages and warning/indicator lamps  
877  
Display messages  
Possible causes/consequences and M Solutions  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
Active Distance Assist inop-  
erative  
* Active Distance Assist DISTRONIC is malfunctioning.  
Other driving systems and driving safety systems may also be malfunctioning.  
#
Drive on carefully.  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Active Distance Assist  
available again  
* Active Distance Assist DISTRONIC is operational again.  
#
Switch on Active Distance Assist DISTRONIC (/ page 352).  
Active Brake Assist Func-  
tions currently limited See  
Owner's Manual  
* For vehicles with the Driving Assistance Package, the following functions may be temporarily unavailable or only parti-  
ally available:  
R
Active Brake Assist with cross-traffic function  
R
Evasive Steering Assist  
PRE‑SAFE® PLUS  
R
Vehicles with Blind Spot Assist: PRE‑SAFE® PLUS is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 364).  
Vehicles without the Driving Assistance Package: Active Brake Assist is temporarily unavailable.  
F206 0105 02  
Display messages and warning/indicator lamps  
878  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive on carefully.  
As soon as the ambient conditions are within the system limits, the system will become available again.  
or  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
Active Brake Assist Func-  
tions limited See Owner's  
Manual  
* For vehicles with the Driving Assistance Package, the following functions may be temporarily unavailable or only parti-  
ally available:  
R
Active Brake Assist with cross-traffic function  
R
Evasive Steering Assist  
PRE‑SAFE® PLUS  
R
Vehicles without the Driving Assistance Package: Active Brake Assist is temporarily unavailable or only partially availa-  
ble.  
#
Drive on carefully.  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Active Steering Assist cur-  
rently unavailable See Own-  
er's Manual  
* Active Steering Assist is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 358).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
F206 0105 02  
Display messages and warning/indicator lamps  
879  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive on  
#
Check the tyre pressure if necessary.  
Active Steering Assist inop-  
erative  
* Active Steering Assist is malfunctioning. Active Distance Assist DISTRONIC remains available.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
* Active Steering Assist has reached the system limits (/ page 358).  
You have not steered independently for a considerable period of time.  
Ø
#
Take over the steering and drive on in accordance with the traffic conditions.  
Active Steering Assist cur-  
rently unavailable due to  
multiple emergency stops  
* Active Steering Assist is temporarily unavailable due to multiple emergency stops.  
#
Take over the steering and stop in accordance with the traffic conditions.  
#
Switch the vehicle off and switch it back on  
Active Steering Assist is available once more.  
* Your hands are not on the steering wheel. Active Steering Assist will initiate an emergency stop (/ page 358).  
#
Put your hands on the steering wheel.  
Ø
Information on cancelling an emergency stop (/ page 360).  
Beginning emergency stop  
F206 0105 02  
Display messages and warning/indicator lamps  
880  
Display messages  
Possible causes/consequences and M Solutions  
Active Emergency Stop  
Assist currently unavailable  
See Owner's Manual  
* Active Emergency Stop Assist is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 360).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
#
Drive on  
or  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
* Vehicles without the Driving Assistance Package: Active Emergency Stop Assist is temporarily unavailable due to multi-  
ple emergency stops.  
#
Take over the steering and stop in accordance with the traffic conditions.  
#
Switch the vehicle off and switch it back on  
Active Emergency Stop Assist is available once more.  
Active Emergency Stop  
Assist inoperative  
* Active Emergency Stop Assist is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
881  
Display messages  
Possible causes/consequences and M Solutions  
Active Lane Change Assist  
currently unavailable See  
Owner's Manual  
* Active Lane Change Assist is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 362).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
#
Drive on  
or  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
Active Lane Change Assist  
inoperative  
* Active Lane Change Assist is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Active Stop-and-Go Assist  
currently unavailable see  
Owner's Manual  
* Active Stop-and-Go Assist is temporarily unavailable. Active Distance Assist DISTRONIC and Active Steering Assist are  
still available.  
The ambient conditions are outside the system limits (/ page 349).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
#
Drive on  
F206 0105 02  
Display messages and warning/indicator lamps  
882  
Display messages  
Possible causes/consequences and M Solutions  
Active Stop-and-Go Assist  
inoperative See Owner's  
Manual  
* Active Stop-and-Go Assist is malfunctioning.  
Active Stop-and-Go Assist has been deactivated. Active Distance Assist DISTRONIC and Active Steering Assist are still  
available.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Blind Spot Assist currently  
unavailable See Owner's  
Manual  
* Blind Spot Assist is temporarily unavailable.  
The system limits have been reached (/ page 378).  
Once the cause of the problem is no longer present, the system will be available again.  
#
Drive on  
or  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
Blind Spot Assist inopera-  
tive  
* Blind Spot Assist or the exit warning is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
883  
Display messages  
Possible causes/consequences and M Solutions  
Blind Spot Assist unavaila-  
ble when towing a trailer  
See Owner's Manual  
* When you establish the electrical connection to the trailer, Blind Spot Assist will be unavailable.  
#
Press the leꢀ-hand Touch Control and acknowledge the display message.  
Active Blind Spot Assist  
currently unavailable See  
Owner's Manual  
* Active Blind Spot Assist is temporarily unavailable.  
The system limits have been reached (/ page 378).  
Once the cause of the problem is no longer present, the system will be available again.  
#
Drive on  
or  
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart  
the vehicle.  
Active Blind Spot Assist  
inoperative  
* Active Blind Spot Assist or the exit warning is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Active Blind Spot Assist  
unavailable when towing a  
trailer See Owner's Manual  
* When you establish the electrical connection to the trailer, Active Blind Spot Assist will be unavailable.  
#
Press the leꢀ-hand Touch Control and acknowledge the display message.  
F206 0105 02  
Display messages and warning/indicator lamps  
884  
Display messages  
Possible causes/consequences and M Solutions  
Active Lane Keeping Assist  
currently unavailable See  
Owner's Manual  
* Active Lane Keeping Assist is temporarily unavailable.  
The ambient conditions are outside the system limits (/ page 382).  
As soon as the ambient conditions are within the system limits, the system will become available again.  
#
Drive on  
Active Lane Keeping Assist  
inoperative  
* Active Lane Keeping Assist is malfunctioning.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
Active Lane Keeping Assist  
functions restricted See  
Owner's Manual  
* Active Lane Keeping Assist is available but restricted.  
#
Drive on  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
* Your hands are not on the steering wheel. The Active Lane Keeping Assist will initiate an emergency stop  
(/ page 382).  
Ø
#
Put your hands on the steering wheel.  
Beginning emergency stop  
Information on cancelling an emergency stop (/ page 360).  
F206 0105 02  
Display messages and warning/indicator lamps  
885  
Display messages  
¸
ð
ç
Ó
Possible causes/consequences and M Solutions  
* Front and corner radar sensors (hereaꢀer "sensors") are malfunctioning. Possible causes:  
R
The sensors are dirty  
R
Heavy rain or snow  
R
Extended country driving without other traffic, e.g. in the desert  
Driving systems and driving safety systems may be malfunctioning or temporarily unavailable. The brake system, steer-  
ing and drive system will continue to function normally.  
#
Drive on carefully.  
Once the causes of the problem are no longer present, the driving systems and driving safety systems will be available  
again and the corresponding symbols will be switched off.  
If the display message does not disappear:  
temporarily unavailable  
Sensors dirty  
#
Stop the vehicle in accordance with the traffic conditions.  
#
Clean all sensor covers from the outside (/ page 334).  
#
Restart the vehicle.  
F206 0105 02  
Display messages and warning/indicator lamps  
886  
Display messages  
Possible causes/consequences and M Solutions  
* The view of the multifunction camera is restricted. Possible causes:  
R
Dirt on the windscreen in the field of vision of the multifunction camera  
Heavy rain, snow or fog  
Mist on the inside of the windscreen: in certain weather conditions, mist can form on the inside of the windscreen  
during cold times of year in particular.  
ê
ð
Ó
¬
ç
Ô
R
R
%
This mist on the windscreen will be removed automatically within a short time with the aid of a heater. The restric-  
tion is temporary.  
Driving systems and driving safety systems may be malfunctioning or temporarily unavailable. The brake system, steer-  
ing and drive system will continue to function normally.  
#
Drive on carefully.  
Once the causes of the problem are no longer present, the driving systems and driving safety systems will be available  
again and the corresponding symbols will be switched off.  
If the display message does not disappear:  
#
Stop the vehicle in accordance with the traffic conditions.  
Clean the windscreen, especially in the position of the multifunction camera (/ page 334).  
#
#
Restart the vehicle.  
Camera view restricted  
See Owner's Manual  
F206 0105 02  
Display messages and warning/indicator lamps  
887  
Display messages  
ð
¸
Ø
Possible causes/consequences and M Solutions  
* When the trailer socket is occupied, some driving systems will be available only to a limited extent.  
#
Drive carefully if you are towing a trailer or have the bicycle rack mounted.  
Restricted during trailer  
operation  
The PRE‑SAFE® functions are malfunctioning.  
PRE-SAFE inoperative See  
Owner's Manual  
*
#
Consult a qualified specialist workshop.  
The PRE‑SAFE® Impulse Side system is malfunctioning or inoperative aꢀer having already been triggered.  
PRE-SAFE impulse side  
inoperative See Owner's  
Manual  
*
*
#
Consult a qualified specialist workshop.  
The PRE‑SAFE® system is malfunctioning.  
PRE-SAFE PLUS inopera-  
tive See Owner's Manual  
#
Drive on  
or  
F206 0105 02  
Display messages and warning/indicator lamps  
888  
Display messages  
Possible causes/consequences and M Solutions  
#
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message does not disappear: consult a qualified specialist workshop.  
Parking assistance systems  
Display messages  
Possible causes/consequences and M Solutions  
PARKTRONIC inoperative  
See Owner's Manual  
* Parking Assist PARKTRONIC is malfunctioning.  
Once the cause of the problem is no longer present, the system will be available again.  
#
Continue driving while paying attention to the vehicle's surroundings.  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
#
If the display message still appears, consult a qualified specialist workshop.  
PARKTRONIC and manoeu-  
vring assistant unavailable  
at rear when towing a  
trailer  
* If transport equipment, e.g. a trailer or bicycle rack, is attached to the trailer hitch and the electrical connection is  
correctly established, Parking Assist PARKTRONIC is not available at the rear when reversing. The rear manoeuvring  
assistant is also unavailable in this situation.  
#
Press the leꢀ-hand Touch Control and acknowledge the display message.  
Active Parking Assist and  
PARKTRONIC inoperative  
See Owner's Manual  
* Active Parking Assist and Parking Assist PARKTRONIC are malfunctioning.  
Once the cause of the problem is no longer present, the system will be available again.  
#
Continue driving while paying attention to the vehicle's surroundings.  
F206 0105 02  
Display messages and warning/indicator lamps  
889  
Display messages  
Possible causes/consequences and M Solutions  
or  
#
Stop the vehicle in accordance with the traffic conditions and restart the vehicle.  
If the display message still appears, consult a qualified specialist workshop.  
#
Limited availability of  
Active Parking Assist  
manoeuvring assistant See  
Owner's Manual  
* Active Parking Assist’s manoeuvring assistant is temporarily unavailable or only partially available.  
#
Clean all sensors of the parking and camera system (/ page 623).  
#
If the display message still appears, consult a qualified specialist workshop.  
Mercedes-Benz emergency call system  
Display messages  
Possible causes/consequences and M Solutions  
* The Mercedes-Benz emergency call system is malfunctioning. The Mercedes me connect system is also malfunction-  
ing.  
#
G
Consult a qualified specialist workshop.  
Inoperative  
F206 0105 02  
Display messages and warning/indicator lamps  
890  
Battery  
Display messages  
Possible causes/consequences and M Solutions  
* The 12 V on-board electrical system is malfunctioning.  
#
Consult a qualified specialist workshop immediately.  
#
12 V on-board electrical  
system Visit workshop  
* The 12 V battery is no longer being charged and the state of charge is too low.  
#
*
NOTE Possible engine damage if you continue driving  
#
Stop vehicle See Owner's  
Manual  
Do not continue driving under any circumstances.  
Consult a qualified specialist workshop.  
#
#
#
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Switch off the vehicle.  
Consult a qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
891  
Display messages  
Possible causes/consequences and M Solutions  
* The vehicle is off and the state of charge of the 12 V battery is too low.  
#
Switch off electrical consumers that are not required.  
#
#
Drive for 30–60 mins.  
Start the vehicle to charge  
the 12 V battery  
or  
#
Charge the 12 V battery when stationary (/ page 57).  
#
Plug-in hybrid: Charge the vehicle at a charging station (/ page 306).  
* The state of charge of the 12 V battery is too low.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Leave the vehicle running  
If the display message disappears: drive on.  
If the display message does not disappear: consult a qualified specialist workshop.  
#
#
Stop vehicle Leave vehicle  
on to charge the 12 V bat-  
tery  
#
#
* The 48 V on-board electrical system is malfunctioning.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Switch off the vehicle.  
Consult a qualified specialist workshop.  
Û
#
Stop vehicle See Owner's  
Manual  
#
F206 0105 02  
Display messages and warning/indicator lamps  
892  
Display messages  
Possible causes/consequences and M Solutions  
* The 48 V battery is overheating. There is a risk of fire.  
#
Stop the vehicle immediately in accordance with the traffic conditions.  
If possible, stop the vehicle in the open air and ensure that all vehicle occupants get out.  
Û
#
Battery overheated Stop,  
everybody out! Outdoors if  
possible  
%
#
Supporting vehicle functions may activate automatically, e.g. air-recirculation mode as part of climate control.  
Do not continue driving.  
#
If smoke is present, leave the danger zone and call the fire service immediately.  
Consult a qualified specialist workshop even if there are no external signs of a fire.  
#
* The 48 V on-board electrical system has function restrictions.  
Comfort functions, such as the air conditioning system, may be available only to a limited extent.  
It is possible to drive on.  
Û
48 V battery See Owner's  
Manual  
#
If the display message remains active permanently, consult a qualified specialist workshop immediately.  
* The 48 V battery is discharged. You have switched on the vehicle while the 12 V battery was being charged with a  
suitable charger or while another vehicle was providing starting assistance.  
The discharged 48 V battery is charged automatically via the voltage converter. Aꢀer a few minutes, the Possible to  
start the vehicle again display message will be shown on the driver's display.  
Ý
Please wait 48 V battery  
charging  
#
Start the vehicle.  
F206 0105 02  
Display messages and warning/indicator lamps  
893  
Display messages  
Possible causes/consequences and M Solutions  
#
Drive the vehicle for a while to charge the 12 V battery and the 48 V battery aꢀer disconnecting the charger from  
the vehicle.  
If the Possible to start the vehicle again display message does not appear aꢀer a few minutes:  
#
Try to start the vehicle.  
#
If the vehicle does not start, consult a qualified specialist workshop.  
Possible to start the vehi-  
cle again  
* The 48 V battery has been charged automatically via the voltage converter.  
#
Start the vehicle and drive for a while to charge the 12 V battery and the 48 V battery.  
Tyre pressure monitor  
Display messages  
Possible causes/consequences and M Solutions  
Tyre press. monitor cur-  
rently unavailable  
* There is interference from a powerful radio signal source As a result, no signals from the tyre pressure sensors are  
being received. The tyre pressure monitoring system is temporarily unavailable.  
The tyre pressure monitoring system will restart automatically as soon as the cause has been rectified.  
#
Drive on  
Tyre press. monitor inoper-  
ative  
* The tyre pressure monitoring system is malfunctioning.  
F206 0105 02  
Display messages and warning/indicator lamps  
894  
Display messages  
Possible causes/consequences and M Solutions  
&
WARNING There is a risk of an accident if the tyre pressure monitoring system is malfunctioning  
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.  
Tyres with insufficient tyre pressure may impair the driving characteristics as well as steering and braking.  
#
Have the tyre pressure monitoring system checked at a qualified specialist workshop.  
#
Consult a qualified specialist workshop.  
Tyre pressure monitor inop-  
* The wheels fitted do not have suitable tyre pressure sensors. The tyre pressure monitoring system is deactivated.  
erative No tyre pressure  
sensors  
#
Fit wheels with suitable tyre pressure sensors.  
* There is no signal from the tyre pressure sensor in at least one wheel. No pressure value is displayed for the affected  
tyre.  
#
é
Have the faulty tyre pressure sensor replaced at a qualified specialist workshop.  
Wheel sensor(s) missing  
* The tyre pressure in one or more tyres has dropped significantly.  
The wheel position is displayed. A warning tone will also sound.  
é
&
WARNING Risk of an accident due to insufficient tyre pressure  
Check tyre(s)  
R
The tyres can burst.  
F206 0105 02  
Display messages and warning/indicator lamps  
895  
Display messages  
Possible causes/consequences and M Solutions  
R
The tyres can wear excessively and/or unevenly.  
R
The driving characteristics as well as the steering and braking may be greatly impaired.  
You could then lose control of the vehicle.  
#
Observe the recommended tyre pressures.  
#
Adjust the tyre pressure if necessary.  
#
Stop the vehicle in accordance with the traffic conditions.  
Check the tyre pressure (/ page 654) and the tyres.  
#
* The tyre pressure is too low in at least one of the tyres, or the difference in tyre pressure between the individual  
wheels is too great.  
é
#
Check the tyre pressure and add air, if necessary.  
#
Rectify tyre pressure  
When the tyre pressure is correct, restart the tyre pressure monitor (/ page 657).  
* The pressure in one or more tyres has dropped suddenly. The wheel position is displayed.  
é
&
WARNING Risk of an accident from driving with a flat tyre  
R
The tyres can overheat and be damaged.  
The driving characteristics as well as the steering and braking characteristics may be greatly impaired.  
Warning tyre malfunction  
R
You could then lose control of the vehicle.  
F206 0105 02  
Display messages and warning/indicator lamps  
896  
Display messages  
Possible causes/consequences and M Solutions  
#
#
Do not drive with a flat tyre.  
Do not exceed the maximum permissible driving distance in emergency mode and the maximum permissible  
speed with a flat MOExtended tyre.  
#
Observe the notes on flat tyres.  
Notes on flat tyres (/ page 60).  
#
Stop the vehicle in accordance with the traffic conditions.  
#
Check the tyres.  
* At least one tyre is overheating. The affected tyres are displayed in red. At temperatures close to the limit value, the  
tyres are displayed in yellow.  
é
&
WARNING Risk of an accident from driving with overheated tyres  
Tyre(s) overheated  
Overheated tyres can burst.  
#
Reduce speed so that the tyres cool down.  
#
Reduce your speed so that the tyres cool down.  
* At least one tyre is overheating. The affected tyres are displayed in red. At temperatures close to the limit value, the  
tyres are displayed in yellow.  
é
Reduce speed  
F206 0105 02  
Display messages and warning/indicator lamps  
897  
Display messages  
Possible causes/consequences and M Solutions  
&
WARNING Risk of an accident from driving with overheated tyres  
Overheated tyres can burst.  
#
Reduce speed so that the tyres cool down.  
#
Reduce your speed so that the tyres cool down.  
Exhaust gas aꢀertreatment  
Display messages  
Possible causes/consequences and M Solutions  
The AdBlue® level has fallen into the reserve range.  
*
Top up AdBlue® immediately (/ page 27).  
#
Ø
Refill AdBlue See Owner’s  
Manual  
F206 0105 02  
Display messages and warning/indicator lamps  
898  
Display messages  
Possible causes/consequences and M Solutions  
The low AdBlue® level will lead to limited performance aꢀer the remaining distance displayed has been covered.  
*
Top up with AdBlue® immediately (/ page 27).  
#
Ø
Top up AdBlue Emergency  
op. in XXX km See Owner's  
Manual  
The low AdBlue® level will lead to limited performance from the speed displayed.  
*
Aꢀer the remaining distance displayed has been covered, it will no longer be possible to start the vehicle.  
Ø
Top up with at least the indicated amount of AdBlue® (/ page 27).  
#
Top up AdBlue XX,X l  
Emerg. op.: max. XXX  
km/h Start not poss. in  
XXX km  
The AdBlue® tank is empty. You can no longer start the vehicle.  
*
Top up with at least the indicated amount of AdBlue® (/ page 27).  
#
Ø
#
Switch on the vehicle and wait for approximately 60 seconds.  
Start the vehicle.  
Top up AdBlue XX,X l  
Switch vehicle on, wait 60  
sec. or engine start not  
poss.  
#
F206 0105 02  
Display messages and warning/indicator lamps  
899  
Display messages  
Possible causes/consequences and M Solutions  
The AdBlue® system is malfunctioning.  
*
#
Consult a qualified specialist workshop immediately.  
¯
AdBlue system fault See  
Owner's Manual  
The AdBlue® system is malfunctioning. Performance will be reduced once the remaining distance displayed has been  
covered.  
*
¯
#
Consult a qualified specialist workshop immediately.  
AdBlue system malfunction  
Emergency op. in XXX km  
See Owner's Manual  
Power restriction due to the AdBlue® system fault. Aꢀer the distance displayed has been covered, it will no longer be  
possible to start the vehicle.  
*
¯
#
Consult a qualified specialist workshop immediately.  
AdBlue system malfunction  
Emerg. op.: max. XXX  
km/h Start not poss. in  
XXX km  
F206 0105 02  
Display messages and warning/indicator lamps  
900  
Display messages  
Possible causes/consequences and M Solutions  
The AdBlue® system is malfunctioning. You can no longer start the vehicle.  
*
#
Consult a qualified specialist workshop immediately.  
¯
AdBlue system fault Engine  
start not possible  
* Plug-in hybrid:  
The low AdBlue® level will result in the combustion engine being switched off aꢀer the displayed remaining distance  
Ø
has been driven.  
Top up AdBlue In XXX km  
Electric only. See Owner's  
Manual  
From this point on, the vehicle can be driven only in all-electric mode, depending on the state of charge of the high-  
voltage battery.  
Top up with AdBlue® immediately (/ page 27).  
#
* Plug-in hybrid:  
The AdBlue® tank is empty. The vehicle can be driven only in all-electric mode, depending on the state of charge of the  
Ø
high-voltage battery.  
Top up with at least the indicated amount of AdBlue® (/ page 27).  
Top up XX,X l AdBlue Only  
"Electric" available See  
Owner's Manual  
#
#
Switch on the vehicle and wait for approximately 60 seconds.  
#
Start the vehicle.  
F206 0105 02  
Display messages and warning/indicator lamps  
901  
Display messages  
Possible causes/consequences and M Solutions  
* Plug-in hybrid:  
The AdBlue® system is malfunctioning. The combustion engine will switch off aꢀer the remaining distance displayed.  
From this point on, the vehicle can be driven only in all-electric mode, depending on the state of charge of the high-  
voltage battery.  
¯
AdBlue system fault In XXX  
km Electric only. See Own-  
er's Manual  
#
Consult a qualified specialist workshop immediately.  
* Plug-in hybrid:  
The AdBlue® system is malfunctioning. The vehicle can be driven only in all-electric mode, depending on the state of  
¯
charge of the high-voltage battery.  
AdBlue system fault Only  
"Electric" drive program  
available  
#
Consult a qualified specialist workshop immediately.  
F206 0105 02  
Display messages and warning/indicator lamps  
902  
Engine oil  
Display messages  
Possible causes/consequences and M Solutions  
* The engine oil level has dropped to the minimum level.  
5
*
NOTE Engine damage caused by driving with insufficient engine oil  
Avoid long journeys with insufficient engine oil.  
#
Add 1 litre engine oil when  
next refuelling  
#
When next refuelling, add 1 litre of engine oil (/ page 614).  
Notes on engine oil (/ page 792).  
* The engine oil level is too high.  
5
*
NOTE Engine damage caused by driving with excess engine oil  
Avoid long journeys with excess engine oil.  
#
Engine oil level Reduce oil  
level  
#
Consult a qualified specialist workshop immediately and have the engine oil level reduced.  
* The engine oil level is too low.  
5
*
NOTE Engine damage caused by driving with insufficient engine oil  
Avoid long journeys with insufficient engine oil.  
#
Engine oil level Stop  
Switch off the vehicle  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
F206 0105 02  
Display messages and warning/indicator lamps  
903  
Display messages  
Possible causes/consequences and M Solutions  
#
Switch off the vehicle.  
#
Add 1 l of engine oil (/ page 614).  
#
Check the engine oil level.  
Notes on engine oil (/ page 792).  
* The oil pressure is too low.  
5
*
NOTE Engine damage caused by driving with insufficient oil pressure  
Avoid driving with insufficient oil pressure.  
#
Engine oil pressure Stop  
Switch off the vehicle  
#
#
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Switch off the vehicle.  
Consult a qualified specialist workshop.  
* The electrical connection to the oil level sensor has been interrupted or the oil level sensor is faulty.  
#
Consult a qualified specialist workshop.  
5
Engine oil level cannot be  
measured  
F206 0105 02  
Display messages and warning/indicator lamps  
904  
Display messages  
Possible causes/consequences and M Solutions  
* Vehicles with a diesel engine: the engine oil quality is no longer sufficient.  
#
Visit a qualified specialist workshop and have the oil changed.  
5
Engine oil Quality loss Oil  
change required  
ü
Driver's display  
Seat belt (/ page 906)  
Warning and indicator lamps  
Overview of indicator and warning lamps  
p
Occupant presence reminder (white)  
(/ page 906)  
Some systems will perform a self-test when the  
vehicle is switched on. Some indicator and warn-  
ing lamps may briefly light up or flash. This behav-  
iour is non-critical. These indicator and warning  
lamps indicate a malfunction only if they light up  
or flash aꢀer the vehicle has been started or dur-  
ing a journey.  
p
Occupant presence reminder (yellow)  
(/ page 906)  
Drive system  
_
Ú
#
Reduced power (/ page 908)  
System error (/ page 908)  
Electrical fault (/ page 908)  
Vehicle  
ï
Indicator and warning lamps  
Occupant safety  
Trailer hitch (/ page 909)  
Ù
Power steering (yellow) (/ page 909)  
6
Restraint system (/ page 906)  
F206 0105 02  
Display messages and warning/indicator lamps  
Tyre pressure monitoring system  
905  
Ù
Ù
Power steering (red) (/ page 909)  
Driving and driving safety systems  
!
÷
å
å
¤
Æ
â
Û
ê
L
Ó
ê
Æ
ä
h
Tyre pressure monitoring system  
ABS (/ page 917)  
ESP® (/ page 917)  
ESP® OFF (/ page 917)  
ESP® OFF (/ page 917)  
Rear axle steering (yellow) (/ page 909)  
(/ page 924)  
Engine  
ÿ
;
p
Exterior lighting  
Coolant temperature (/ page 911)  
Engine diagnostics (/ page 911)  
T
Standing lights (/ page 220)  
Low beam (/ page 220)  
L
ESP® OFF (/ page 917)  
Vehicles with a petrol engine: engine oper-  
ating temperature (/ page 911)  
K
High beam (/ page 222)  
Turn signal lights (/ page 222)  
Rear fog light (/ page 220)  
ESP® SPORT (/ page 917)  
DRIFT MODE (/ page 917)  
ATTENTION ASSIST (/ page 917)  
Traffic Sign Assist (/ page 917)  
Distance warning (/ page 917)  
Active Brake Assist (/ page 917)  
Active Brake Assist (/ page 917)  
Active Brake Assist (/ page 917)  
Rear-axle level control (/ page 917)  
p
#!  
R
Engine operating temperature  
(/ page 911)  
%
#
8
Vehicles with a diesel engine: preglow  
Electrical fault (/ page 911)  
Symbols on the central display  
É
L
º
Drive Away Assist (/ page 411)  
Reserve fuel with fuel filler flap location  
indicator (/ page 911)  
Rear cross traffic warning (/ page 412)  
Manoeuvring brake function (/ page 413)  
Brakes  
!
Electric parking brake (yellow)  
(/ page 915)  
!
J
J
Electric parking brake (red) (/ page 915)  
Brakes (yellow) (/ page 915)  
Mercedes-Benz emergency call system  
H
Mercedes-Benz emergency call system  
(/ page 923)  
Brakes (red) (/ page 915)  
F206 0105 02  
Display messages and warning/indicator lamps  
906  
Occupant safety  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The restraint system red warning lamp is lit while the vehicle is on.  
The restraint system is malfunctioning (/ page 102).  
6
&
WARNING Risk of injury due to malfunctions in the restraint system  
Restraint system warning  
lamp  
Components in the restraint system may be activated unintentionally or not deploy as intended in an accident.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
Plug-in hybrid:  
&
DANGER Risk of fatal injuries due to restraint system malfunctions  
Components in the restraint system may be activated unintentionally or not deploy as planned in an accident. In the  
event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.  
You may suffer an electric shock if you touch the damaged components of the high-voltage on-board electrical sys-  
tem.  
#
Have the restraint system checked and repaired immediately at a qualified specialist workshop.  
#
Aꢀer an accident, switch off the vehicle immediately.  
#
Drive on carefully.  
#
#
Note the messages on the driver's display.  
Consult a qualified specialist workshop immediately.  
F206 0105 02  
 
Display messages and warning/indicator lamps  
907  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The red seat belt warning lamp flashes and an intermittent warning tone sounds.  
The driver or front passenger has not fastened their seat belt while the vehicle is in motion.  
ü
#
Fasten your seat belt (/ page 102).  
There are objects on the front passenger seat.  
Seat belt warning lamp  
#
flashes  
Remove the objects from the front passenger seat.  
* The red seat belt warning lamp lights up once the vehicle has started.  
In addition, an intermittent warning tone may sound.  
ü
The red seat belt warning lamp reminds the driver and front passenger to fasten their seat belts.  
#
Seat belt warning lamp  
lights up  
Fasten your seat belt (/ page 102).  
If you have placed objects on the front passenger seat, the red seat belt warning lamp may remain lit.  
* The white occupant presence reminder warning lamp is lit.  
The occupant presence reminder is deactivated.  
p
Occupant presence  
reminder warning lamp  
(white)  
F206 0105 02  
Display messages and warning/indicator lamps  
908  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The yellow occupant presence reminder warning lamp is lit.  
The occupant presence reminder is malfunctioning  
p
#
Note the messages on the driver's display.  
Occupant presence  
reminder warning lamp (yel-  
low)  
Drive system  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The yellow reduced-power warning lamp is on.  
Drive system power output is reduced.  
_
#
Note the messages on the driver's display.  
Reduced-power warning  
lamp  
*The red system error warning lamp is lit while the vehicle is in a state of operational readiness õ.  
There is a malfunction in the drive system.  
Ú
#
Note the messages on the driver's display.  
System error warning lamp  
F206 0105 02  
 
Display messages and warning/indicator lamps  
909  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The red electrical fault warning lamp is lit.  
There is a fault with the electrics.  
#
#
Note the messages on the driver's display.  
Electrical fault warning lamp  
Vehicle  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The red trailer hitch warning lamp is lit.  
The trailer hitch is not operational.  
ï
&
WARNING Risk of an accident if the ball neck is not locked  
Trailer hitch warning lamp  
The trailer may become detached.  
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.  
Uncouple the trailer and secure it against rolling away.  
Initiate a new swivelling procedure and do not re-couple the trailer until the display message disappears.  
#
#
#
Note the messages on the driver's display.  
F206 0105 02  
 
Display messages and warning/indicator lamps  
910  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The yellow power steering warning lamp is lit while the vehicle is running.  
The power assistance or the steering itself is malfunctioning.  
Ù
#
Note the messages on the driver's display.  
Power steering warning  
lamp (yellow)  
* The red power steering warning lamp is lit while the vehicle is running.  
The power assistance or the steering itself is malfunctioning.  
Ù
&
WARNING Risk of accident if steering capability is impaired  
Power steering warning  
lamp (red)  
If the steering does not function as intended, the vehicle's operating safety is jeopardised.  
#
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not  
continue driving under any circumstances.  
#
Consult a qualified specialist workshop.  
#
Note the messages on the driver's display.  
* The yellow rear axle steering warning lamp is lit while the vehicle is running.  
The rear axle steering is malfunctioning.  
Ù
#
Note the messages on the driver's display.  
Rear axle steering warning  
lamp (yellow)  
F206 0105 02  
Display messages and warning/indicator lamps  
911  
Engine  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The red coolant warning lamp is lit while the engine is running.  
Possible causes:  
ÿ
R
The temperature sensor is malfunctioning  
Coolant warning lamp (red)  
R
The coolant level is too low  
R
The air supply to the radiator is obstructed  
R
The radiator fan is faulty  
R
The engine coolant pump is faulty  
If there is an additional warning tone, the coolant temperature has exceeded 120°C.  
&
WARNING Risk of burns when opening the bonnet  
If you open the bonnet in the event of an overheated engine or fire in the engine compartment, the following situa-  
tions may occur:  
R
You may come into contact with hot gases.  
R
You may come into contact with other escaping hot operating fluids.  
#
Before opening the bonnet, allow the engine to cool down.  
#
In the event of a fire in the engine compartment, keep the bonnet closed and call the fire service.  
#
Stop immediately in accordance with the traffic conditions and switch off the vehicle. Do not continue driving.  
F206 0105 02  
 
Display messages and warning/indicator lamps  
912  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
#
Note the messages on the driver's display.  
If the coolant temperature display is at the lower end of the temperature scale:  
#
Consult a qualified specialist workshop.  
If the coolant temperature display is at the upper end of the temperature scale:  
#
Exit the vehicle and keep a safe distance from it until the engine has cooled down.  
#
Check the coolant level (/ page 615).  
#
Make sure that the air supply to the radiator is not obstructed.  
#
Avoiding high loads on the engine, drive to the nearest qualified specialist workshop. In doing so, ensure that the  
coolant temperature display remains below 120°C.  
* The yellow coolant warning lamp is lit while the engine is running.  
Possible causes:  
ÿ
R
The temperature sensor is malfunctioning  
Coolant warning lamp (yel-  
low)  
R
The charge air, transmission oil or battery cooling is faulty  
R
The radiator shutters are blocked or defective  
#
Avoiding high loads on the engine, drive to the nearest qualified specialist workshop.  
F206 0105 02  
Display messages and warning/indicator lamps  
913  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The yellow engine diagnostics warning lamp is lit while the engine is running.  
A malfunction has occurred in the engine, the exhaust system or the fuel system.  
The emissions limit value may have been exceeded and the engine may be running in emergency operation mode.  
;
#
Engine diagnostics warning  
lamp  
Have the vehicle checked as soon as possible at a qualified specialist workshop.  
Vehicles with a diesel engine: the fuel tank may have been run dry.  
#
Start the engine three to four times aꢀer refuelling.  
If the yellow engine diagnosis warning lamp goes out, emergency operation mode is cancelled. The vehicle need not  
be checked.  
* The red electrical fault warning lamp is lit.  
There is a fault in the electrics.  
#
#
Note the messages on the driver's display.  
Electrical fault warning lamp  
*The blue warning lamp for engine operating temperature will remain lit until the engine operating temperature has been  
reached.  
p
The engine output and engine torque will remain reduced until then.  
#
Take this into consideration in your driving style.  
Engine operating tempera-  
ture warning lamp  
F206 0105 02  
Display messages and warning/indicator lamps  
914  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
*Vehicles with a petrol engine: aꢀer a cold start, the blue engine operating temperature warning lamp is on.  
Engine output and engine torque are reduced.  
p
#
Take this into consideration in your driving style.  
Engine operating tempera-  
ture warning lamp  
* The yellow fuel reserve warning lamp lights up while the engine is running.  
The fuel supply has dropped into the reserve range.  
8
#
Refuel.  
Fuel reserve warning lamp  
lights up  
F206 0105 02  
Display messages and warning/indicator lamps  
915  
Brakes  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
*The red electric parking brake indicator lamp flashes or is lit.  
The yellow electric parking brake indicator lamp is also lit in the event of a malfunction.  
!
#
Note the messages on the driver's display.  
Electric parking brake indi-  
cator lamp (red)  
!
Electric parking brake indi-  
cator lamp (yellow)  
* The yellow brakes warning lamp is lit while the vehicle is running.  
J
&
WARNING Risk of an accident due to a brake system malfunction  
If the brake system is malfunctioning, braking characteristics may be impaired.  
#
Brakes warning lamp (yel-  
low)  
Drive on carefully.  
#
Have the brake system checked immediately at a qualified specialist workshop.  
#
Adjust your speed and drive on carefully, leaving a suitable distance to the vehicle in front.  
If the driver's display shows a display message, observe it.  
#
F206 0105 02  
 
Display messages and warning/indicator lamps  
916  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
#
Consult a qualified specialist workshop.  
* The red brakes warning lamp is lit while the vehicle is running.  
Possible causes:  
J
R
The brake force boosting is malfunctioning and the braking characteristics may be affected.  
Brakes warning lamp (red)  
R
There is insufficient brake fluid in the brake fluid reservoir.  
#
Note the messages on the driver's display.  
&
WARNING Risk of accident and injury if brake force boosting is malfunctioning  
If brake force boosting is malfunctioning, increased brake pedal force may be necessary for braking. The braking  
characteristics may be impaired. The braking distance can increase in emergency braking situations.  
#
Stop in a safe location immediately. Do not continue driving!  
#
Consult a qualified specialist workshop.  
&
WARNING Risk of an accident due to low brake fluid level  
If the brake fluid level is too low, the braking effect and the braking characteristics may be impaired.  
#
Stop the vehicle as soon as possible, paying attention to road and traffic conditions. Do not continue driving.  
#
Consult a qualified specialist workshop.  
#
Do not top up the brake fluid.  
F206 0105 02  
Display messages and warning/indicator lamps  
917  
Driving and driving safety systems  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The yellow ABS warning lamp is lit while the vehicle is running.  
ABS is malfunctioning.  
If an additional warning tone sounds, EBD is malfunctioning.  
!
ABS warning lamp  
Other driving systems and driving safety systems may also be malfunctioning.  
#
Note the messages on the driver's display.  
&
WARNING There is a risk of skidding if EBD or ABS is malfunctioning  
The wheels may lock during braking.  
The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addition,  
other driving safety systems are switched off.  
#
Drive on carefully.  
#
Have the brake system checked immediately at a qualified specialist workshop.  
#
Drive on carefully.  
#
Consult a qualified specialist workshop.  
F206 0105 02  
 
Display messages and warning/indicator lamps  
918  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
The yellow ESP® warning lamp flashes while the vehicle is in motion.  
One or more wheels have reached their grip limit (/ page 337).  
*
÷
One or more wheels have reached their grip limit (/ page 338).  
ESP® warning lamp flashes  
#
Adapt your driving style to suit the road and weather conditions.  
The yellow ESP® warning lamp is lit while the vehicle is running.  
ESP® is malfunctioning.  
*
÷
Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning.  
ESP® warning lamp lights up  
#
Note the messages on the driver's display.  
WARNING Risk of skidding if ESP® is malfunctioning  
&
If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilisation. In addition, other driving safety systems are  
switched off.  
#
Drive on carefully.  
Have ESP® checked at a qualified specialist workshop.  
#
#
Drive on carefully.  
#
Consult a qualified specialist workshop immediately.  
F206 0105 02  
Display messages and warning/indicator lamps  
919  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
The yellow ESP® OFF warning lamp is lit while the vehicle is running.  
ESP® is deactivated.  
*
å
Other driving systems and driving safety systems may also be inoperative.  
ESP® OFF warning lamp  
WARNING Risk of skidding when driving with ESP® deactivated  
&
ESP® does not act to stabilise the vehicle. The availability of further driving safety systems is also limited.  
#
Drive on carefully.  
Deactivate ESP® only for as long as the situation requires.  
#
If ESP® cannot be activated, ESP® is malfunctioning.  
Have ESP® checked immediately at a qualified specialist workshop.  
#
Observe the notes on deactivating ESP® (/ page 337).  
#
The yellow ESP® OFF warning lamps are lit while the vehicle is running.  
ESP® is deactivated.  
*
å
¤
Other driving systems and driving safety systems may also be inoperative.  
WARNING Risk of skidding when driving with ESP® deactivated  
&
ESP® does not act to stabilise the vehicle. The availability of further driving safety systems is also limited.  
F206 0105 02  
Display messages and warning/indicator lamps  
920  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
#
Drive on carefully.  
Deactivate ESP® only for as long as the situation requires.  
#
If ESP® cannot be activated, ESP® is malfunctioning.  
Have ESP® checked immediately at a qualified specialist workshop.  
#
Observe the notes on deactivating ESP® (/ page 338).  
#
ESP® SPORT is activated while the vehicle is running.  
*
When ESP® SPORT is activated, ESP® will stabilise the vehicle only to a limited extent.  
å
Æ
WARNING Risk of skidding if ESP® SPORT is used incorrectly  
&
When you activate ESP® SPORT, there is an increased risk of skidding and having an accident.  
#
Activate ESP® SPORT only in the circumstances described below.  
Observe the notes on activating ESP® SPORT(/ page 338).  
#
* The ATTENTION ASSIST warning lamp is lit.  
ATTENTION ASSIST is malfunctioning.  
Û
#
Consult a qualified specialist workshop.  
ATTENTION ASSIST warning  
lamp  
F206 0105 02  
Display messages and warning/indicator lamps  
921  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The Traffic Sign Assist warning lamp is lit.  
Traffic Sign Assist is malfunctioning.  
ê
#
Note the messages on the driver's display.  
Traffic Sign Assist warning  
lamp  
* The red distance warning lamp lights up while the vehicle is in motion.  
The distance to the vehicle in front is too small for the speed selected.  
If there is an additional warning tone, you are approaching an obstacle at too high a speed.  
L
#
Warning lamp for distance  
warning  
Be prepared to brake immediately.  
#
Increase the distance.  
Function of Active Brake Assist (/ page 364).  
* The Active Brake Assist warning lamp is on.  
Due to dirty sensors or a malfunction, the system is not available or the range of functions is restricted.  
Ó
#
Note the messages on the driver's display.  
Active Brake Assist warning  
lamp  
F206 0105 02  
Display messages and warning/indicator lamps  
922  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
* The Active Brake Assist warning lamp is on.  
The system is switched off or the range of functions has been automatically restricted.  
This may be the case if the driver is not wearing a seat belt or another driving system has been activated.  
ê
#
Active Brake Assist warning  
lamp  
Observe the notes on Active Brake Assist (/ page 364).  
* The Active Brake Assist warning lamp is on.  
Aꢀer you drive off, the system's range of functions will be restricted due to the teach-in process.  
Depending on the ambient conditions, the teach-in process may take a few minutes.  
Æ
#
Active Brake Assist warning  
lamp  
Observe the notes on Active Brake Assist (/ page 364).  
* The yellow AMG RIDE CONTROL warning lamp is lit.  
There is a fault in the AMG RIDE CONTROL.  
ä
#
Note the messages on the driver's display.  
Suspension warning lamp  
(yellow)  
* DRIFT MODE is activated while the engine is running.  
â
&
WARNING Risk of skidding and having an accident from wheels spinning  
DRIFT MODE warning lamp  
When you use DRIFT MODE, ESP® is not available.  
F206 0105 02  
Display messages and warning/indicator lamps  
923  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
There is an increased risk of skidding and having an accident.  
#
Do not use DRIFT MODE on normal roads.  
#
DRIFT MODE may only be activated and used on closed race circuits, not on public roads.  
Make sure that no persons or obstacles are in the close vicinity of your vehicle.  
#
#
Observe the notes on activating DRIFT MODE (/ page 388).  
* Plug-in hybrid:  
The yellow rear axle level control warning lamp is on.  
There is a fault with the rear axle level control.  
ä
#
Suspension warning lamp  
(yellow)  
Note the messages on the driver's display.  
Mercedes-Benz emergency call system  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
*The Mercedes-Benz emergency call system is malfunctioning. The Mercedes me connect system is also malfunctioning.  
#
Consult a qualified specialist workshop.  
H
Mercedes-Benz emergency  
call system warning lamp  
F206 0105 02  
 
Display messages and warning/indicator lamps  
924  
Tyre pressure monitor  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
*The yellow tyre pressure monitor warning lamp (pressure loss/malfunction) flashes for approximately one minute and  
then remains lit.  
h
The tyre pressure monitoring system is malfunctioning.  
Tyre pressure monitoring  
&
WARNING There is a risk of an accident if the tyre pressure monitoring system is malfunctioning  
system warning lamp flashes  
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.  
Tyres with insufficient tyre pressure may impair the driving characteristics as well as steering and braking.  
#
Have the tyre pressure monitoring system checked at a qualified specialist workshop.  
#
Consult a qualified specialist workshop.  
*The yellow tyre pressure monitoring system warning lamp (pressure loss/malfunction) is lit.  
The tyre pressure monitoring system has detected tyre pressure loss in at least one of the tyres.  
h
&
WARNING Risk of an accident due to insufficient tyre pressure  
Tyre pressure monitoring  
system warning lamp lights  
up  
R
R
R
The tyres can burst.  
The tyres can wear excessively and/or unevenly.  
The driving characteristics as well as the steering and braking may be greatly impaired.  
You could then lose control of the vehicle.  
F206 0105 02  
 
Display messages and warning/indicator lamps  
925  
Warning/indicator lamp  
Possible causes/consequences and M Solutions  
#
Observe the recommended tyre pressures.  
#
Adjust the tyre pressure if necessary.  
#
Stop the vehicle in accordance with the traffic conditions.  
#
Check the tyre pressure and the tyres.  
F206 0105 02  

Popular Manuals

2023 Ford Focus 4 Door
2017-2023 Honda Civic 4 Door
2023 Toyota Corolla 4 Door
2023 Ford Fiesta 4 Door
2023 Honda CR-V SUV
2023 Volkswagen Golf 4 Door
2023 Honda Accord 4 Door
2022 BMW 5 Series 4 Door
2024 Audi A3 4 Door
2024 BMW X5 SUV
2022 BMW 3 Series 4 Door
2023 Kia Sorento SUV
2022 Mercedes E Class 4 Door
2023 Mercedes C Class 4 Door
2023 Volkswagen Tiguan 4 Door
2024 Subaru Forester SUV
2023 Mazda Cx-5 SUV
2023 Hyundai Santa Fe SUV
2020 Nissan Qashqai SUV
2020 Ford Kuga SUV
2020 Kia Sportage SUV
2020 Audi Q3 SUV
2020 Audi Q5 SUV
2020 Land Rover Evoque SUV
2020 Nissan Juke SUV
2020 Hyundai Tucson SUV
2020 Peugeot 3008 SUV
2020 Volvo XC40 SUV
2020 Land Rover Discovery Sport SUV
2020 Toyota C-Hr SUV
2020 Vauxhall Corsa 4 Door
2020 BMW X3 SUV
2020 BMW X1 SUV
2020 Audi Q2 SUV
2020 Ford Ecosport SUV
2020 Vauxhall Mokka SUV
2020 Hyundai Kona SUV
2020 Toyota Rav4 SUV
2020 Vauxhall Grandland X SUV
2020 Nissan X Trail SUV
2020 Skoda Karoq SUV
2020 Volvo Xc90 SUV