Driver's display
446
Switching the head-up display on/off
Electric mode is still possible when power out-
put requests are low or when at a standstill.
The power meter has the following functions:
Function of the power meter
Driver's display:
4
©
R
In electric mode, the area 1 – 2 shows
Switching on
what percentage of the electrical drive is cur-
rently being used. The combustion engine is
switched on at 100%. In boost mode, the elec-
trical power assistance of the drive is dis-
played.
#
Swipe upwards on the leꢀ-hand Touch Con-
trol.
#
Press leꢀ-hand Touch Control a.
Switching off
R
The area 4 – 5 shows the recuperation and
charging behaviour using the combustion
engine.
#
Swipe upwards on the leꢀ-hand Touch Con-
trol.
1
Beginning of the electrical drive support dis-
play range
#
Swipe on the leꢀ-hand Touch Control and
select Head-up display.
%
Due to various system limits, the displayed
value 4 may temporarily differ slightly from
the actual value.
2
3
End of the electrical drive support display
range
Current state of charge of the high-voltage
battery
#
Press leꢀ-hand Touch Control a.
Vehicles with a 48 V on-board electrical system
Overview of status displays on the driver's dis-
play
The status displays for the driving and driving
safety systems can be found in display sections
1 to 6.
4
5
Maximum recuperated energy
Start of the display range of recuperated
energy
1
2
Electric drive support
Recuperation behaviour of the electric motor
%
Due to various system limits, the values dis-
played may temporarily differ slightly from the
actual value.
%
The Electric drive program is not available if
the state of charge of the high-voltage battery
falls below the minimum value of 25% 3.
F206 0105 02
