Get Drivers display -> Overview of status displays on the drivers display Guide for Mercedes C Class 4 Door 2023

Driver's display

446

Switching the head-up display on/oﬀ

Electric mode is still possible when power out-

put requests are low or when at a standstill.

The power meter has the following functions:

Function of the power meter

Driver's display:

In electric mode, the area 1 – 2 shows

Switching on

what percentage of the electrical drive is cur-

rently being used. The combustion engine is

switched on at 100%. In boost mode, the elec-

trical power assistance of the drive is dis-

played.

Swipe upwards on the leꢀ-hand Touch Con-

trol.

Press leꢀ-hand Touch Control a.

Switching oﬀ

The area 4 – 5 shows the recuperation and

charging behaviour using the combustion

engine.

Swipe upwards on the leꢀ-hand Touch Con-

trol.

Beginning of the electrical drive support dis-

play range

Swipe on the leꢀ-hand Touch Control and

select Head-up display.

Due to various system limits, the displayed

value 4 may temporarily diﬀer slightly from

the actual value.

End of the electrical drive support display

range

Current state of charge of the high-voltage

battery

Press leꢀ-hand Touch Control a.

Vehicles with a 48 V on-board electrical system

Overview of status displays on the driver's dis-

play

The status displays for the driving and driving

safety systems can be found in display sections

1 to 6.

Maximum recuperated energy

Start of the display range of recuperated

energy

Electric drive support

Recuperation behaviour of the electric motor

Due to various system limits, the values dis-

played may temporarily diﬀer slightly from the

actual value.

The Electric drive program is not available if

the state of charge of the high-voltage battery

falls below the minimum value of 25% 3.

F206 0105 02

Driver's display

447

Cruise control (/ page 346)

Speed limiter (/ page 346)

Adaptive Highbeam Assist (/ page 228)

Adaptive Highbeam Assist Plus

(/ page 229)

Active Distance Assist DISTRONIC

(/ page 349)

Maximum permissible speed exceeded (for

certain countries only)

Active Stop-and-Go Assist (/ page 358)

Speciﬁed distance for Active Distance

Assist DISTRONIC (/ page 349)

Slippery road surface warning

Active Brake Assist switched oﬀ

(/ page 369)

Vehicles with Speed Limit Assist: detected

instructions and traﬃc signs (/ page 370)

Active Brake Assist impaired or not func-

tioning (/ page 369)

Vehicles with Traﬃc Sign Assist: detected instruc-

tions and traﬃc signs (/ page 373)

Active Steering Assist (/ page 358)

Active Lane Change Assist (/ page 362)

Active Lane Keeping Assist (/ page 382)

If you switch on the ECO start/stop function and

select drive program A, the engine electronics

will switch from eight-cylinder mode to four-cylin-

der mode, if necessary. The driver's display will

show the / symbol in the status area.

Active Blind Spot Assist (only on assistant

display) (/ page 381)

Pedestrian detection (only on assistant dis-

play)

Active Parking Assist is available

(/ page 407)

Plug‑in hybrid operation activated

Haptic accelerator pedal

Overview of status displays on the driver's dis-

play

The status displays for the driving and driving

safety systems can be found in display sections

1 to 4.

(/ page 279, 275, 281)

Active Parking Assist has detected a park-

ing space (/ page 407)

Sound generator inoperative (/ page 834)

ECO start/stop function (/ page 272)

HOLD function (/ page 342)

Parking Assist PARKTRONIC deactivated

(/ page 404)

F206 0105 02

Drivers display -> Overview of status displays on the drivers display for Your Mercedes C Class 4 Door 2023

Popular Manuals