Get General notes -> Notes on assembling the number plate on the front licence plate holder Guide for Mercedes C Class 4 Door 2023

General notes

If you modify component parts of these high-

voltage components or touch damaged com-

ponent parts, you may be electrocuted.

High voltage components may be damaged in

an accident, although the damage may not be

visible.

eras or driving and safety systems may mal-

function or fail.

Observe the following points when assembling

the licence plate on the front licence plate

holder:

Assemble the licence plate directly on

Never perform modiﬁcations to compo-

nent parts of high-voltage components.

the licence plate holder without advertis-

ing media or other holders.

Never touch damaged component parts

Assemble the licence plate so that it

does not protrude above or to the side of

the licence plate adapter.

of high-voltage components.

Example

Never touch component parts of high-

voltage components aꢀer an accident.

All work on high voltage components must be car-

ried out in a qualiﬁed specialist workshop.

Declarations of conformity and notes on driving

Vehicles with a 48 V on-board electrical system

contain high-voltage components. These compo-

nents are marked with a high-voltage label:

in diﬀerent countries

Notes on assembling the number plate on the

front licence plate holder

Electromagnetic compatibility

The electromagnetic compatibility of the vehicle

components has been checked and certiﬁed

according to the currently valid version of Regula-

tion UN-R 10.

NOTE Malfunctions and system failures

due to incorrect assembly of the licence

plate on the front licence plate holder

If the licence plate is incorrectly assembled on

the front licence plate holder, sensors, cam-

F206 0105 02

General notes

National information for regulatory radio compo-

nents

https://moba.i.mercedes-benz.com/markets/

ece-row/baix/cars/certiﬁcates-of-conformity/

en_GB/index.html

wireless speciﬁcations of the device, including

soꢀware changes, replacement of the original

antenna, or adding the option to connect the

device to an external antenna, without ﬁrst obtain-

ing approval from the Communica-tions Ministry,

because of concern about wireless interference.

Notes when crossing national borders

You must observe the radio regulatory provisions

for the country in which you are currently driving

when operating the vehicle.

For the United Kingdom only:

Only for EU and EFTA countries and countries that

recognise the EU manufacturer's declaration of

conformity:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the radio components

declare that all radio equipment installed in the

vehicle is in compliance with the relevant statu-

tory requirements. The full texts of the declara-

tions of conformity are available at the following

web address:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the wireless components

ensure that all wireless components installed in

the vehicle comply with Directive 2014/53/EU.

The full texts of the EU declarations of conformity

are available at the following web address:

You can obtain further information from a

Mercedes-Benz service centre.

For Israel only:

It is prohibited to make any change to a vehicle-

installed radio component that could aﬀect the

F206 0105 02

General notes

https://moba.i.mercedes-benz.com/markets/

ece-row/baix/cars/certiﬁcates-of-conformity/

en_GB/index.html

Note on two-way radio systems in the vehicle:

For Russia only:

These systems are not protected against harmful

interference and must not cause interference in

properly approved systems.

For Jamaica only:

All wireless vehicle components have received

type approval from the SMA.

For Nigeria only:

The manufacturers of the wireless components

installed in the vehicle hereby declare that all

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

For Ukraine only:

For Brazil only:

Connection and use of the radio communications

equipment in this vehicle is permitted by the

Nigerian Communications Commission

F206 0105 02

General notes

The manufacturers of the wireless components

installed in the vehicle hereby declare that the

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

Model: DT 200146 (UW0851ve-IBK LK2), DT

200177 (UW0872-IBK-LK2P), 200156 (UW0867-

LK3)

Mercedes Benz Part Number: A 000 583 8205, A

000 583 8305, A 000 583 8405

is in conformity with all relevant provisions of the

directives:

Electromagnetic Compatibility 2014/30/EU

and complies with the following standards :

EN IEC 55014-1: 2021

EN IEC 55014-2: 2021

Including (Category I)

Dunlop Tech GmbH, Oﬀenbacher Landstr. 8,

63456 Hanau, Germany authorized representative

for the complation of the technical documenta-

tion.

Adress: Oﬀenbacher Landstraße 8, 63456 Hanau,

Germany

15-07-2022

[B. Schuchhardt]

Signature

Declaration place: Germany

TIREFIT kit

For the United Kingdom only:

Copy and translation of the original declaration of

conformity:

Dunlop Tech GmbH

UKCA Declaration of Conformity

Product :

Product

Electrical Air pump

Model / Brand

DT 200146 (UW0851ve-IBK LK2), DT 200177

(UW0872), DT 200156 (UW0867-LK3)

Mercedes Benz Part Number:

A 000 583 8205, A 000 583 8305, A 000 583

8405

For EU and EFTA countries only:

Copy and translation of the original declaration of

conformity:

EU Declaration of Conformity

Dunlop Tech GmbH

Oﬀenbacher Landstr. 8

DE-63456 Hanau

Declare under our sole reponsibility that

Product Description: Electrical Air Pump

Serial Number: 000000001 to 999999999

Brand: Mercedes Benz

Factory name: UNIK WORLD IND. CO., LTD.

Address: NO. 110-2, Xiwei, Shanhua Dist., Tainan

City 74163, Taiwan (R.O.C.)

Name Dunlop Tech GmbH

Authorized Representative: Bernd Schuchhardt

F206 0105 02

General notes

Authorized Representative (UK-GB):

Name:

Address:

Contact person:

WARNING Risk of accident due to objects

in the driver's footwell

15-07-2022

(Date)

[B. Schuchhardt]

Signature

Objects in the driver's footwell may impede

pedal travel or block a depressed pedal.

This jeopardises the operating and road safety

of the vehicle.

Diagnostics connection

This declaration is issued under the sole responsi-

bility of the mentioned Representative. The sub-

ject equipment under declaration is in conformity

with the UK-GB Regulation(s) below:

Statutory Instruments 2016 No. 1091

The Electromagnetic Compatibility Regulations

2016

Below designated standards were taken confer-

ring a presumption of conformity with the relevant

UK-GB regulations:

BS EN IEC 55014-1: 2021

BS EN IEC 55014-2: 2021

Authorized Representative responsible for making

this declaration:

Name: Dunlop Tech GmbH

The diagnostics connection is a technical inter-

face in the vehicle. It is used, for example, during

repair and maintenance work or for reading out

vehicle data in a specialist workshop. Diagnostic

devices should therefore be connected only at a

qualiﬁed specialist workshop.

Stow all objects in the vehicle securely

so that they cannot get into the driver's

footwell.

Always ﬁt the ﬂoor mats securely and as

prescribed in order to ensure that there

is always suﬃcient room for the pedals.

WARNING Risk of accident due to con-

necting devices to the diagnostics con-

nection

Do not use loose ﬂoor mats and do not

place ﬂoor mats on top of one another.

If you connect devices to the diagnostics con-

nection of the vehicle, the function of vehicle

systems and operating safety may be

impaired.

NOTE Battery discharging from using devi-

ces connected to the diagnostics connec-

tion

Using devices at the diagnostics connection

drains the battery.

For safety reasons, we recommend that

you only use and connect products

approved by a Mercedes-Benz service

centre.

Authorized Representative: Bernd Schuchhardt

Address: Oﬀenbacher Landstraße 8, 63456

Hanau, Germany

Check the charge level of the battery.

F206 0105 02

General notes -> Notes on assembling the number plate on the front licence plate holder for Your Mercedes C Class 4 Door 2023

Popular Manuals