Get MBUX multimedia system -> AMG TRACK PACE Guide for Mercedes C Class 4 Door 2023

MBUX multimedia system

492

and have the vehicle checked at a qualiﬁed spe-

Requirements:

Select Reset.

A query appears asking if the system should

really be reset.

cialist workshop immediately .

The vehicle is switched on.

Further information about soꢀware updates can

be found at https://me.secure.mercedes-

benz.com

Some settings can only be reset when the

vehicle is stationary.

Select Yes.

The multimedia system is reset to the factory

settings. The multimedia system is restarted

aꢀer the system reset.

Multimedia system:

Failure of the central display:

Settings

System

Reset

If the central display fails or the display message

shown above is shown continuously, several sys-

tems such as the reversing camera, Parking Assist

PARKTRONIC or climate control are no longer

available. Drive on carefully and consult a special-

ist workshop as soon as possible.

When resetting the system, personal data and set-

tings are deleted, for example:

Due to data protection, as well as the function

of individual driving systems and driving safety

systems, it is a requirement to carry out a

complete system reset before selling the vehi-

cle or transferring it to a third party, or aꢀer

use as a hire car.

Connected devices

Individual user proﬁles

Biometric data

Vehicles with rear telephony: handset connec-

tion

Resetting the multimedia system (reset function)

AMG TRACK PACE

Function of AMG TRACK PACE

The data used and saved in the multimedia

system by the driver assistance systems is

deleted.

Vehicles with rear telephony: The handset

must be in the cradle while the system is

reset.

WARNING Risk of accident due to failure

of central display functions

This function is an on-demand feature

(/ page 83).

While the multimedia system is reset, its func-

tions, such as the reversing camera, are not

available.

With AMG TRACK PACE, the driving characteris-

tics on race tracks can be analysed and opti-

mised. You can drive previously saved race tracks

(e.g. Hockenheimring), or record and save new

tracks. The driven lap times are stored for every

Only reset the multimedia system when

the vehicle is stationary.

F206 0105 02

MBUX multimedia system

493

track. These can be analysed and compared to

other lap times to achieve the best possible race

results. Additionally, acceleration and braking pro-

cedures can be measured and stored.

Note: Use AMG TRACK PACE only on closed-oﬀ

routes outside the public traﬃc area. Adapt your

driving style to your personal performance and

environmental conditions. As the driver, you are

solely responsible for driving your vehicle. Park

your vehicle safely before operating the applica-

tion.

ö Select Set Sector.

Select É Stop Recording to end track

recording or cross the starting line again.

Select Navigate to for navigation to the start-

ing line.

Timing begins automatically when the starting line

has been crossed.

Conﬁrm the prompt with Yes.

When ¨ is selected, the track display can

Select the weather.

be switched to AR. In addition, it is possible to

switch to the telemetry display by selecting

ò.

The temperature is determined automatically.

Enter a name.

Press a to conﬁrm.

Select ð Stop timekeeping to end time-

keeping.

Conﬁrm the prompt with OK.

The track is saved under the name entered.

Searching by track name

Select the weather.

Select Yes to save the times driven for this

track.

Setting Track Race

Multimedia system:

Select ª Search .

Enter the desired track name.

Tracks with the searched name are displayed.

TRACK PACE

Track Race

Showing readings during Track Race

The following readings can be shown:

Measuring time on a saved track

Recording a new track

ß Select All tracks.

Select the desired track.

Select u.

Select Start timing if you are already at the

starting line.

Select Ü New track .

Tyre temperature

Miniature map

Sector overview

G-force display

Select Ì Start Record. at the desired

starting point.

The track recording starts at this point.

During track recording, sectors can be set to

divide up the track.

Lap overview

F206 0105 02

MBUX multimedia system

494

Select ï Start timing .

Select à.

Drag the desired display from the grid on the

leꢀ or right edge of the central display.

The readings are shown during the Track

Race.

Select Add recording to use a diﬀerent ses-

Editing parameters

Deleting parameters

Adding new parameters

sion as a reference value.

Select % to return to the overview.

Select Diagram.

The following values can be set for the param-

eters, for example:

Set the desired parameters.

The analysis is displayed.

speed

By selecting ¨ on the active display, you can

deactivate this.

Longitudinal/lateral acceleration

Steering angle

Displaying the analysis

Engine speed

ß Select All tracks.

An overview of all the driven tracks appears.

Select a track.

Select a session.

Engine oil/tyre temperature

Based on the analysis, you can check and opti-

mise the driving behaviour for any position on the

track.

The following data are displayed:

Exporting tracks (USB)

Lap and sector times

Select ß Tracks .

Average and top speed

An overview of all stored tracks appears.

Driver

Select the desired track.

Vehicle

Select options u for the desired track.

Date

Weather

Select Export track to….

The selected track can be exported to a USB

storage device connected to the vehicle.

Lap overview

Parameter overview

F206 0105 02

MBUX multimedia system

495

Editing tracks and recordings

Set a target speed.

Measurement stops as soon as the speciﬁed

target speed has been reached.

Start oﬀ and begin the measurement.

Measurement begins when the vehicle accel-

erates.

Measuring braking

Select ß Tracks .

Select the desired track.

Select Z Drag race options.

Select Braking.

Select options u for the desired track.

Set a starting speed or select Automatic.

Start oﬀ and begin the measurement.

Brake to a stop.

Measurement is incremental, in steps of

Select Rename or Delete.

Measurement can be stopped early by interrupt-

ing the acceleration procedure.

Select a track.

10 km/h to a stop. If the braking procedure is

started e.g. at a speed of 157 km/h, meas-

urement starts as soon as 150 km/h has

been reached

Highlight the desired recording.

Quarter mile race

Select u options.

Select Z Drag race options.

Select Quarter-mile.

Select Exporting to… or Delete.

Storing and calling up measured values

If measurement is completed or cancelled, a

prompt appears asking whether the measurement

should be saved.

Set a target distance.

Setting Drag Race

Multimedia system:

Measurement stops as soon as the speciﬁed

target distance has been reached.

Start oﬀ and begin the measurement.

Measurement begins when the vehicle accel-

erates. Timing runs until the target distance or

a maximum of one mile has been travelled.

TRACK PACE

Drag Race

Conﬁrm the prompt with OK to save.

Measuring acceleration

Calling up saved measurements

Select Z Drag race options.

Select Acceleration.

± Select History.

Measurement can be stopped early by interrupt-

ing the acceleration procedure.

Select Acceleration, Quarter-mile or Braking.

Select a measurement.

Set a starting speed or select Automatic.

Measurement begins as soon as the speciﬁed

starting speed has been reached.

The desired measurement is displayed in

detail.

F206 0105 02

MBUX multimedia system

496

Conﬁguring AMG TRACK PACE

Select Continue and conﬁrm the authorisation

prompt.

Delete a measurement.

Requirements

To connect a mobile device to the TRACK PACE

app:

A four-digit code is shown on the central dis-

play.

Enter the code on the smartphone.

The device is authorised.

Calling up the telemetry display

Multimedia system:

The TRACK PACE app is installed on the

mobile end device.

TRACK PACE

Telemetry

De-authorising the mobile device

The mobile end device is connected to the

multimedia system via Wi-Fi (/ page 486).

The telemetry display shows current vehicle data

as a digital value and as a diagram. Up to four

parameters can be selected to be shown on the

display.

Select TRACK PACE App.

Select a device.

Conﬁrm the message prompt with Yes.

The device is de-authorised.

Multimedia system:

TRACK PACE

For example:

Connect mobile device via the TRACK PACE app

The TRACK PACE app makes it possible to record

videos and to synchronise them with stored

tracks.

Setting the TRACK PACE display on the head-up

display and driver's display

Engine speed

Wheel angle

speed

Steering angle

Select IC and HUD contents.

Activate or deactivate the desired contents.

The contents on the head-up display and the

driver's display are adapted.

For further information on the Head-up Dis-

play (/ page 444).

Select TRACK PACE App.

Select Authorise new device.

Set the desired parameters.

Set the time.

The set parameters are evaluated in the dia-

gram for the selected time.

Start the TRACK PACE app on the device to be

connected.

Further information about the driver's display

(/ page 430).

F206 0105 02

MBUX multimedia system

497

Setting acoustic feedback

Activate or deactivate the function.

Plug-in hybrid settings

Conﬁguring the charging settings

Select Acoustic feedback.

Adjusting the dashcam

If the vehicle is equipped with a dashcam, it can

be used in AMG TRACK PACE.

A scale with values from 0 to 10 is shown.

Multimedia system:

Select a setting.

Hybrid

Charging

Select Dashcam.

Displaying statistics

Setting the charging program

Select Track Race or Drag Race and activate

Activate recording.

Select TRACK PACE statistics.

Select Home, Work or Standard.

Statistics on the current user proﬁle are dis-

played.

The following data are displayed:

You can set which overlay is to be used in the

recorded video under Video overlay contents.

The standard charging program is automati-

cally activated when the vehicle is switched

on or oﬀ.

Driving time

Activating Boost Strategy

This function is used to increase performance on

a race track and is only available in the I

drive program.

Opening the socket ﬂap

Track driven

Recorded tracks

Recorded Track Races

Laps recorded

Recorded Drag Races

Maximum design speed

Press Open socket flap.

The socket ﬂap opens and can be closed

again by hand.

Select Boost Strategy.

Activate or deactivate the function.

The availability of this function is dependent

on the vehicle's equipment.

The function is not available for all vehicle

models.

Unlocking the charging cable (mode 3 or 4)

When the function is active, the charging cable is

unlocked when the maximum charge level is

reached.

Activating the ambient light

If this function is active, the vehicle interior is lit in

red or green depending on delta time.

Select Home or Work.

Select Ambient light.

F206 0105 02

MBUX multimedia system -> AMG TRACK PACE for Your Mercedes C Class 4 Door 2023

Popular Manuals