MBUX multimedia system
498
#
Activate or deactivate Unlock charging cable.
Mercedes-AMG vehicles: the Quick charge func-
Setting an individual departure time
#
Select Add new time and set the desired
tion is not available for Mercedes-AMG vehicles.
Activating or deactivating location-based charging
#
departure time.
%
The availability of this function is dependent
on the vehicle's equipment.
Select Charging program, home or Charging
program, work.
or
#
Select ´ and adapt an existing departure
time.
Setting the departure time
#
Activate or deactivate Select based on loca-
tion.
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When rapid charging is
deactivated, the charging process start time is
optimised for the next departure time. When rapid
charging is activated, the charging process starts
immediately, irrespective of the next departure
time.
Setting the repeat days
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
#
Select Add new time and set the desired
departure time.
#
Mark the relevant weekdays for which the
departure time will apply and confirm with
a.
Activating or deactivating rapid charging
#
or
Activate or deactivate the Quick charge func-
tion.
#
Mercedes-AMG vehicles: the prediction for the
remaining range and the maximum charge level
are not displayed.
Select ´ and edit existing repeat days.
Setting a break in the charging process
The Quick charge function increases the maxi-
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. Aꢀer the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery.
Up to four breaks in the charging process can be
set during which the vehicle is not charged, even
if it is connected to a charging station.
#
Select Next departure time.
The following charging times can be selected:
#
R
individual charging times
Select Charging interruptions.
R
#
a Week profile
Select Add new time and then set and save
the times for the beginning and end of the
break.
F206 0105 02
