MBUX multimedia system
605
▌Selecting a sound profile in the Burmester® 3D-
surround sound system
Multimedia system:
▌Switching loudness normalisation in the
▌Adjusting the balance and fader in the
Burmester® 3D-surround sound system on or off
Burmester® 3D-surround sound system
Multimedia system:
Multimedia system:
4
5
5
5
4
5
5
4
5
5
©
Media
Z
Equaliser
©
Media
Z
©
Media
Z
5
5
Loudness normalisation
Balance and Fader
Setting an existing sound profile
The function compensates for differing loudness
when changing between audio sources and within
an audio source. Several levels are available for
this purpose. The currently set level is displayed.
Adjusting the balance
#
Select a sound profile.
#
Move the volume distribution between the
right and leꢀ sides of the vehicle in the grid
shown.
Setting up a personal sound profile
#
Select Personal sound profile and select
Switch off loudness normalisation as follows:
Z . Select Reconfigure and restart the set-
up assistant.
The volume is distributed between the speak-
ers on the leꢀ and right sides in the vehicle.
#
Switch on one level.
or
#
Setting up a personal sound profile for the first
Adjusting the fader
time:
Switch off the loudness normalisation.
#
Move the volume distribution between the
#
Select Personal sound profile.
front and rear of the vehicle in the grid shown.
The volume is distributed between the speak-
ers in the front and rear of the vehicle.
#
Open the set-up assistant with Start.
#
Observe the messages on the display and
select the preferred settings.
%
Setting 0 is recommended for high quality
music and voice reproduction.
The personal sound profile is created with the
selected settings and can be selected in the
Sound profiles menu.
F206 0105 02