Safely transporting children in the vehicle – Securing the child restraint system
133
L Suitable for semi-universal
Securing the child restraint system
Adjusting the seat correctly
Front passenger air-
bag enabled1
UF, L, B2, B3
U, L, B2, B3
child restraint systems accord-
ing to the table in "Recommen-
ded child restraint systems", or
if the vehicle and the seat are
listed in the child restraint sys-
tem manufacturer's vehicle
model list.
Front passenger air-
bag disabled1, 2
When fitting a child restraint system on the leꢀ or
right rear seat, always observe the following:
#
Make sure that the child's feet do not touch
1 Adjust the seat cushion incli-
nation so that the front edge of
the seat cushion is in the high-
est position and the rear edge
of the seat cushion is in the low-
est position.
the front seat. If necessary, move the front
seat slightly forwards.
If the head restraint of the child restraint system
cannot be fully extended when it is installed in the
vehicle, this will result in restrictions on the maxi-
mum size setting for certain child restraint sys-
tems. Observe the child restraint system manu-
facturer's installation instructions.
UF Suitable for forward-facing
child restraint systems of the
"Universal" category in this
weight category.
2 The vehicle is equipped with
automatic front passenger air-
bag shutoff. The PASSENGER
AIR BAG OFF indicator lamp
must be lit.
B2, B3 Suitable for the installa-
tion of child restraint systems
complying with ISO/B2 and
ISO/B3 child seat cushion test
equipment.
%
Contact with the roof when the head restraint
is fully extended and locked in place will not
result in any restrictions on use.
®° When fitting an ISOFIX/LATCH or
i‑Size child restraint system, also observe the fol-
lowing:
X Not suitable for children in
this weight category.
U Suitable for child restraint
systems of the "Universal" cate-
gory in this weight category.
#
When using a rearward-facing child restraint
system on a rear seat: adjust the front seat so
F206 0105 02