Opening and closing
70
#
Have the vehicle and SmartKey checked at a
qualiꢀed specialist workshop.
In the following situations, there is a danger of
being locked out when the function is activated:
R
While the vehicle is being tow-started or
There is interference from a powerful radio signal
source
Possible causes if the function of KEYLESS-GO is
impaired:
pushed
R
If the vehicle is being tested on a roller dyna-
mometer
R
High voltage power lines
Power closing function
R
Mobile phones
R
Electronic devices (notebooks, tablets)
&
WARNING Risk of becoming trapped when
R
Shielding due to metal objects or induction
loops for electrical gate systems or automatic
barriers
the doors close automatically
Body parts or objects can become trapped,
causing injuries.
#
Make sure that there is suꢃcient distance
between the SmartKey and the potential
source of interference.
#
Ensure that no body parts or objects are
in the closing area.
Automatic closing of the doors can be
canceled by pulling the outer or inner
door handle.
#
#
To activate: press and hold button 2 for
approximately ꢀve seconds until an acoustic
signal sounds.
To deactivate: press and hold button 1 for
approximately ꢀve seconds until an acoustic
signal sounds.
#
Activating/deactivating the automatic locking fea-
ture
If you push the door into the lock to the ꢀrst
detent position, the power closing function will
automatically pull the door into the lock.
The vehicle is locked automatically when the vehi-
cle is switched on and the wheels are turning
faster than walking pace.
