Get Charging -> How to use an electric device during charging Guide for Mitsubishi Outlander SUV 2020

How to use an electric device during charging

V2H (Vehicle to Home)

NOTE

WARNING

If the remote climate control is started dur-

ing charging, the time until full charge may

extend or the charging rate may decrease.

Do not leave children and people who

need nursing care and pets etc. inside the

vehicle.

The inside of the vehicle may become hot

or cold for reasons such as automatic sys-

tem shutdown.

Also, when the outside air temperature is

low, the temperature inside the vehicle

may fall rapidly. In the worst case, there

is a danger of death.

Also, since the wiper and the electric

parking brake can be operated, an error

in operation may lead to unexpected acci-

dents.

The vehicle power can be used as a house-

hold power supply source. Bidirectional

charging of the vehicle or the home is carried

out by using the quick charge connector of

CHAdeMO standard which is the same as

quick charging. “V2H charging” will charge

the vehicle from the V2H main unit. “V2H

power supply” supplies power from the vehi-

cle to the home via the V2H main unit.

For details of V2H, please confirm with the

PHEV to HOME sales catalogue or the in-

struction manual that is issued by the V2H

maker or consult the V2H maker.

When the remaining quantity of the drive

battery is decreased, the remote climate con-

trol does not operate or it may stop on the

way.

When the auxiliary battery is removed, the

timer control of the MITSUBISHI Remote

Control is reset and each function of the

MITSUBISHI Remote Control cannot be

used. Also the drive battery cannot be

warmed up.

Communicate the wireless LAN device and

your vehicle again.

Please check the surroundings before us-

ing.

Do not move the selector lever, the vehicle

may move unintentionally.

WARNING

How to use an electric

device during charging

Do not get in the vehicle if the persons

have electro-medical apparatus such as

implantable cardiac pacemaker or im-

plantable cardioverter-defibrillator, when

using the air-conditioner during charging.

It may affect the operation of electro-

medical apparatus.

NOTE

If you turn the operation mode of the power

switch to “ON” during normal charging,

quick charging, V2H charging, V2H power

supply, you can use the air conditioner, car

navigation system, audio equipment and so

on.

When using electrical devices during charg-

ing, the following cases may occur, since the

charging to the drive battery is restricted.

During normal charging:

•

The electricity consumption becomes

larger than the charge amount, the drive

battery may not be charged, and the re-

maining amount of the drive battery may

decrease.

3-24

Charging

OGGE20E1

How to use an electric device during charging

Refer to “Changing the operation mode”

on page 7-12.

NOTE

During quick charging:

If the meter display screen is switched to the

•

Charging time may be longer. Also, de-

pending on the specifications of the quick

charger, it may not be charged and the re-

maining amount of the drive battery may

decrease.

energy flow display, you can see the state of

charging and discharging of the drive bat-

tery. Refer to “Energy flow indication during

charging” on page 6-15.

NOTE

Always put the operation mode of the power

switch in ON after the charge lamp is illumi-

nated. Charging may not start when you put

the operation mode of the power switch in

ON before the charge lamp is illuminated.

When the operation mode of the power

switch is ON, the door and tailgate cannot be

locked by the keyless entry or the keyless

operation function. When leaving the vehi-

cle, put the operation mode in OFF and lock

the vehicle.

If you use an air conditioner etc. during

charging, you may not be able to hear the ra-

dio due to strong electromagnetic waves or

noise.

When stopping the use of elec-

trical devices

Put the operation mode of the power switch

in OFF.

Refer to “Changing the operation mode” on

page 7-12.

When using electrical devices

1. Start the normal charging or the quick

charging.

Refer to “Normal charging (charging

method with rated AC 220-240V out-

let)” on page 3-10.

Refer to “Quick charging (charging

method with quick charger)” on page

3-17.

NOTE

4. Electric devices such as the air condi-

tioner, car navigation system, audio

equipment can be used.

Refer to “Warning display list” on page

6-25.

Charging continues even if the operation

mode of the power switch is put in OFF.

When the operation mode of the power

switch is put to OFF, the air conditioner, car

navigation system, audio equipment etc. are

stopped.

2. Confirm that the charge lamp in the me-

ter is illuminated.

NOTE

Put the operation mode in ON and use the

Automatic OFF of the opera-

tion mode

In the following cases, the operation mode

will be turned to OFF automatically.

electrical devices. If the operation mode of

the power switch is ACC, the air conditioner

cannot be used.

For vehicles without the electric heater, the

heating of the air conditioner cannot be used

during charging.

NOTE

If the charging lamp is not illuminated, the

electrical devices will not be operated.

Check that the charging is done correctly.

When the remaining amount of the drive

battery decreases further after the air

conditioner is stopped.

220-240 V AC Power Supply (1500 W) can-

not be used during charging.

3. Put the operation mode of the power

switch from OFF to ON.

Charging

3-25

OGGE20E1

How to use an electric device during charging

When the outside air temperature is low

and the following warning display ap-

pears.

When the temperature of the drive bat-

tery becomes extremely low and the fol-

lowing warning display appears.

NOTE

Even when the operation mode automatical-

ly puts off, air conditioners, car navigation

systems, audio equipment, etc. will stop.

Also, the vehicle status will be the same as

putting the operation mode OFF (for exam-

ple: the lights go off, the room lamp is illu-

minated or the electric mirrors are retracted).

When charging is completed.

When the normal charge connector is

disconnected.

Refer to “Warning display list” on page

6-25.

Automatic stop of the air con-

ditioner

When the charging stop operation is per-

formed by the quick charger.

When the quick charging time has

passed 60 minutes.

When the stop condition (charging

amount/charging time) on the quick

charger is satisfied.

In the following cases, the air conditioner au-

tomatically stops. When the air conditioner

stops, the air conditioner control panel turns

off.

NOTE

To use the air conditioner again after the air

conditioner automatically stops, press the

power switch to turn the operation mode

OFF with the following message appeared,

then press the power switch again to turn

ON the operation mode of the power switch

so as to use the air conditioner.

When the remaining amount of the drive

battery becomes low and the following

warning display appears.

When charging stops due to an electrical

power outage.

When charging stops due to a failure.

When operating the selector lever to the

“N” (NEUTRAL) position. (charging al-

so stops)

Refer to “Warning display list” on page

6-25.

Refer to “Warning display list” on page

6-25.

3-26

Charging

OGGE20E1

How to use an electric device during charging

Energy flow display during

charging

When discharging from the drive battery

NOTE

Energy flow display may change regardless

of the operation of the air conditioner, car

navigation system, audio equipment, etc.

It shows the flow of energy during charging.

If you change the setting of the air condi-

tioner, it may take time until the display of

the energy flow stabilizes.

V2H power supply

A: Various electrical devices

B: Drive battery

No energy flow

C: Charger

Blue arrow: Flow of electric energy

Display of energy flow (exam-

ple)

When charging the drive battery

NOTE

Even when you are not operating the air con-

ditioner, car navigation system, audio equip-

ment, etc., since the on-board computer con-

sumes electricity, arrows may be displayed

from the charger or the drive battery.

Charging

3-27

OGGE20E1

Charging -> How to use an electric device during charging for Your Mitsubishi Outlander SUV 2020

Popular Manuals