Get Charging -> Quick charging Guide for Mitsubishi Outlander SUV 2020

Quick charging (charging method with quick charger)

Drive battery warming system*

NOTE

WARNING

You cannot start the Plug-in Hybrid EV Sys-

tem and drive when the ambient temperature

is -30 °C or lower. (The warning display is

displayed on the information screen in the

multi-information display.) The drive battery

warming system will automatically operate

and the drive battery will be heated when you

connect the normal charge connector to the

normal charge port.

When the ambient temperature is higher than

-28 °C, you can start the Plug-in Hybrid EV

System and drive. The drive battery warming

system will automatically operate and the

drive battery will be heated when all the fol-

lowing conditions are met.

When the ambient temperature is very cold,

you cannot use the charging timer since the

drive battery warming system is operating.

And when the ambient temperature is -30 °C

or lower, you cannot use the function of the

remote climate control. When the ambient

temperature is higher than -29 °C after oper-

ating the drive battery warming system, you

can use the function of the remote climate

control.

Please ask someone to perform the

quick charging if necessary.

Before charging, make sure that there is

no foreign matter such as dust at the

quick charge port and the quick charge

connector.

At this time, do not touch the quick

charge port.

When the quick charge connector is con-

nected to the quick charge port, prevent

foreign matter such as water or dust from

entering in the port.

Connection with foreign matter such as

water or dust may cause fire or an electric

shock. Do not perform charging if there

might be strong exposure to water at the

connection.

During charging, the cooling fans inside

the bonnet room may automatically be

operated even if the operation mode of the

power switch is in OFF.

•

Quick charging (charging

method with quick charger)

WARNING

Be sure to use the quick charger applica-

ble to CHAdeMO standard and certified

by CHAdeMO association. Use of the oth-

er quick charger may cause the fire or

malfunction.

For operation of quick chargers, follow

the manual of each quick charger.

If you use electro-medical apparatus such

The normal charge connector is connec-

ted to the normal charge port at an ambi-

ent temperature under -30 °C.

The Plug-in Hybrid EV System is started

at an ambient temperature between

-29 °C and -10 °C.

Keep your hands away from the cooling

fan during charging.

The drive battery warming system will auto-

matically stop after the drive battery has been

heated until suitable temperature.

NOTE

as implantable cardiac pacemaker or im-

plantable cardioverter-defibrillator, be

careful the following precautions.

If the charge connector is not easily connec-

ted to the charge port due to foreign material

entering, never force the connection. Doing

so could damage the charging equipment or

Please do not use a quick charger.

•

Keep away as much as possible from

the place where the quick charger is

stored. If you approach it carelessly,

leave quickly without standing still.

the vehicle. Contact

MITSUBISHI

MOTORS Authorized Service Point.

Charging

3-17

OGGE20E1

Quick charging (charging method with quick charger)

3. Push the rear portion of the charging lid

(A) until it clicks, and open the charging

lid.

4. Press the tab (B) to open the inner lid

(C).

NOTE

The quick charger might be installed in the

public parking space, some chargers are not

suitable for this vehicle. Check the manual

of each quick charger when charging.

The charge connector and the EV charging

cable stick out of the vehicle body while

charging, so be careful that your body does

not get stuck with them or they do not touch

the next vehicle.

The vehicle equipped with a quick charge

port is compatible with most CHAdeMO*

connectors on charging stations.

*: CHAdeMO is a standard for quick charg-

ing of electric vehicle originally started in

Japan, and the contents have also become an

international standard.

Make sure to lock the doors to prevent theft,

etc. during charging.

When using a quick charger, make sure that

the time available is enough so that the quick

charging can be finished in the time availa-

ble.

If the power supply of the quick charger is

shut off during quick charging, it could lead

to a vehicle failure.

WARNING

Do not leave the inner lid open for a long

NOTE

time.

The charging lid is unlocked in conjunction

with unlocking of the driver’s door as the

following condition.

It could cause an electric leak, a fire or an

electric shock by water or dust entering

into the quick charge port.

Do not touch the metal terminal of the

quick charge port (D) and the quick

charge connector.

The operation mode is put in “OFF” or

“ACC”.

•

The selector lever position is “P” (PARK).

•

When the charging lid cannot be unlocked

even if the driver’s door is unlocked. Open

the charging lid manually by using the re-

lease lever inside of the interior trim in the

cargo room.

Doing so could cause an electric shock

and/or malfunction.

1. Firmly apply the parking brake, press the

electrical parking switch to shift into the

“P” (PARK) position and put the opera-

tion mode of the power switch in the

“OFF” position.

Refer to “If the charging lid cannot be un-

locked” on page 3-16.

2. Unlock the driver’s door to unlock the

charging lid.

3-18

Charging

OGGE20E1

Quick charging (charging method with quick charger)

6. Make sure that the charging indicator (E)

on the instrument cluster is illuminated.

CAUTION

Be sure to insert the quick charge connector

straight into the quick charge port right up to

the base.

Failure to do so may result in the drive bat-

tery not charging or could cause damage to

the charging equipment.

During quick charging, the quick charge

connector cannot be removed because it is

locked. Do not touch or remove the quick

charge connector during charging. Doing so,

the quick charge connector might be dam-

aged. If you want to stop the quick charging

on the way, stop the charging according to

the procedures of a quick charger, and re-

move the quick charge connector after con-

firming the charging is stopped.

NOTE

When the quick charge connector is connec-

ted to the charge port, the charging indicator

is blinking. When charging is started, the

charging indicator is illuminated.

If you want to confirm the drive battery level

during charging, open one of the doors or

operate the multi information display switch,

the drive battery level display (F) appears on

the information screen in the multi informa-

tion display.

Although the predicted charging time dis-

play (G) appears, the charging time for the

quick charging is approximately 30 minutes

and displayed “--:--” in the screen and you

cannot confirm the remaining charging time.

Operation noise may be heard from the vehi-

cle body during quick charging.

This noise comes from the operation of the

drive battery cooling system, and it is not a

malfunction.

Since the drive battery cooling system uses

cool air of the air conditioning, the air condi-

tioning is automatically operated.

After quick charging, if the area under the

vehicle is wet, transparent and loose, it is de-

humidified water from the air conditioning

and not a malfunction.

When an electrical component is used during

charging, the charging time may become

longer.

NOTE

There is a hole on the charge port for water

drainage. If this hole is blocked and water

gets trapped in the charge port, do not

charge. Contact a MITSUBISHI MOTORS

Authorized Service Point.

If the charge port is frozen, melt the ice us-

ing a hair drier. Forcing the charge connector

to connect while frozen could result in mal-

function.

If the charging indicator is not illumina-

ted, charging is not started.

Follow the manual of each quick charg-

er.

5. Connect the quick charge connector in

the quick charge port to begin charging.

For connecting and disconnecting, fol-

low the instruction manual for each

quick charger.

7. Charging is complete when the charging

indicator turns off.

Charging

3-19

OGGE20E1

MITSUBISHI Remote Control*

Disconnect the quick charge connector

according to the manual of the quick

charger.

WARNING

NOTE

After charging, be sure to close the inner

lid and the quick charging lid completely.

Be careful that water or dust does not en-

ter in the quick charge port, inner lid and

quick charge connector.

Make sure that the inner lid is completely

closed.

If the charging lid is forcibly closed without

completely closing inner lid, the hinge on

the inner lid may be broken.

While the charging lid is open, if the doors

and tailgate are locked with the central door

lock, the keyless entry system or the keyless

operation system, the charging lid will lock

when the charging lid is closed.

When the operation mode is switched to ON

while the charging lid is not completely

closed, a warning may be displayed on the

information display of the multi information

display.

CAUTION

As the quick charge connector is heavier in

comparison to the normal charge connector,

allowing it to drop could cause damage to

the vehicle or charge connector or personal

injury. When removing the connector, be

sure to pull it out straight and as carefully as

possible.

Do not leave the quick charge connector

connected to the quick charge port after

charging.

Doing so, someone might stumble and it

could cause an injury or the quick charging

connection might be damaged by playing it.

Entry of water or dust could cause fire,

electric shock or short circuit.

After charging, be sure to disconnect the

charge connector from the charge port.

If the charge connector is only partially

engaged and the connector latch is un-

locked, you could put the operation mode

of the power switch in ON and the vehicle

could start moving. It could lead to an un-

expected accident.

Refer to “Warning display list” on page

6-25.

NOTE

If the operation mode of the power switch is

put in ON with the quick charge connector

connected to the quick charge port, the plu-

gin hybrid EV system cannot be started.

Be sure to disconnect the quick charge con-

nector before start.

Charging may be completed before full

charge. This is a control for efficient charge

and not a malfunction.

MITSUBISHI Remote

Control*

NOTE

Although it is possible to start the electric

motor unit if quick charging has not finished

normally, the charging indicator is continu-

ously blinking. In such a situation, perform

quick charging again and finish it normally

or contact a MITSUBISHI MOTORS Au-

thorized Service Point.

The MITSUBISHI Remote Control allows to

operate the vehicle within the communication

range of the wireless LAN device (which

conforms to IEEE 802.11b and supports iOS

or Android). The following operations are

available.

To achieve full charge, repeat charging from

Step 5 again.

8. Close the inner lid and press the rear of

the charging lid until it clicks to close it.

3-20

Charging

OGGE20E1

Charging -> Quick charging for Your Mitsubishi Outlander SUV 2020

Popular Manuals