Engine overheating
the designated ground location of your
vehicle.
CAUTION
Take care not to get the jumper cable caught
in the cooling fan or other rotating part in
the engine compartment.
CAUTION
Your vehicle is equipped with an exclusive
auxiliary battery. Even if the battery type is
the same, the battery may not be correctly
installed in your vehicle. When replacing the
auxiliary battery, request a MITSUBISHI
MOTORS Authorized Service Point to do
so.
l
l
l
NOTE
If the jumper cable is connected to any posi-
tion other than the appointed one, it may
cause damage to the vehicle.
Engine overheating
7. Start the engine in the vehicle which has
the booster battery, let the engine idle a
few minutes, then start the Plug-in Hy-
brid EV system in your vehicle.
8. Check if the ready indicator illuminates.
If the ready indicator does not illumi-
nate, contact a MITSUBISHI MOTORS
Authorized Service Point.
When the engine is overheating, the warning
display will appear on the information screen
in the multi information display.
Warning display
9
9. When the ready indicator illuminates,
disconnect the jumper cables in the re-
verse order of connection.
10. Check if the select position can be shif-
ted to all positions other than the “P”
(PARK) position.
11. Have the auxiliary battery inspected by
your nearest MITSUBISHI MOTORS
Authorized Service Point.
If this occurs, take the following corrective
measures:
1. Stop the vehicle in a safe place.
2. Check whether steam is coming from the
engine compartment.
WARNING
When connecting the jumper cables, do
l
[If steam does not come from the engine
compartment]
not connect the positive (+) cable to the
negative (-) terminal. Otherwise sparks
might cause explosion of the battery.
With the Plug-in Hybrid EV system still
starting, raise the bonnet to ventilate the
engine compartment.
9-04
For emergencies
OGGE20E1
