For pleasant driving -> Cargo area cover for Your Mitsubishi Outlander SUV 2020

Bottle holder  
For the front seat  
NOTE  
Bottle holder  
Do not store cups or drink cans in the bottle  
holder.  
Tightly close the cap on drink bottles before  
storing them.  
Some bottles may be too big or the wrong  
shape to fit in the holder.  
l
l
l
The cup holder is located in front of the floor  
console.  
To use the cup holder, push the lid.  
WARNING  
Do not spray water or spill beverages in-  
l
side the vehicle. If the switches, wires or  
electrical components become wet, they  
could malfunction or cause a vehicle fire.  
If you accidentally spill a beverage, wipe  
up as much liquid as possible and imme-  
diately consult a MITSUBISHI MOTORS  
Authorized Service Point.  
Cargo area cover  
To use  
8
CAUTION  
Do not drink beverages while driving. This  
is distracting and could cause an accident.  
Drinks could be spilled by the vibration and  
jolts while driving. If the spilt drink is very  
hot, you could be burnt.  
1. Draw out the cover retracted by spring  
and insert it in the mounting grooves  
(A).  
l
l
For the rear seat  
In order to use the cup holder, allow the arm-  
rest to drop down.  
There are bottle holders located on both sides  
of front and rear doors.  
For pleasant driving  
8-85  
OGGE20E1  
Cargo area cover  
2. Remove the cover from the mounting  
grooves, and the cover will roll back into  
the retracted position.  
1. Move one of the sliders (C) towards the  
inside of the vehicle, and fit the tab (D)  
into the installation hole that is to be  
used. Move the opposite slider in the  
same fashion.  
2. Move one of the sliders (C) towards the  
inside of the vehicle and lift it to remove  
the cover.  
NOTE  
Do not put luggage on the cover.  
l
To change position  
There are two installation holes (B) for the  
cover.  
8
To refit  
Refit the cover by performing the removal  
steps in reverse.  
Gently shake the entire cover after fitting it to  
make sure it is securely retained.  
2. After changing the position, gently  
shake the entire cover to make sure it is  
securely retained.  
NOTE  
If the rear seatback touches the cover, move  
the cover rearward.  
l
The cover could break if it supports the seat-  
back of the rear seat.  
To remove  
1. Roll the cover into the retracted position.  
8-86  
For pleasant driving  
OGGE20E1  
Assist grips  
Use the hooks for securing the luggage.  
Assist grips  
Coat hook  
The assist grips (located above the doors on  
the headliner) are not designed to support  
body weight. They are intended for use only  
while seated in the vehicle.  
There is a coat hook on the rear seat assist  
grip of the driver’s side.  
8
CAUTION  
Do not pile up the luggage beyond the seat-  
back height. Also, firmly secure the luggage.  
Otherwise, serious accidents could result due  
to hindered rearward view or flying objects  
during sudden braking.  
l
WARNING  
Do not put a hanger or any heavy or poin-  
l
CAUTION  
Do not use the assist grips when getting into  
or out of the vehicle. The assist grips could  
detach causing you to fall.  
ted object on the coat hook. If the curtain  
airbag was activated, any such item could  
be propelled away with great force and  
could prevent the curtain airbag from in-  
flating correctly. Hang clothes directly on  
the coat hook (without using a hanger).  
Make sure there are no heavy or sharp  
objects in the pockets of clothes that you  
hang on the coat hook.  
l
Luggage hooks  
There are 4 hooks located on the side walls of  
the luggage compartment.  
For pleasant driving  
8-87  
OGGE20E1  
OGGE20E1