Hazard warning flasher switch
While the ECO mode is working, an ECO
mode indicator will be turned on.
NOTE
NOTE
make the adjustment. Refer to the separate
owner’s manual for details.
It is possible to change the tone of a sound-
ing buzzer as the turn-signal lamps flash.
Refer to “Changing the turn-signal sound”
on page 6-21.
If the switch is used for a long period while
the ready indicator is not illuminated, the
auxiliary battery could go flat and the Plugin
Hybrid EV System could be impossible to
start.
While the hazard warning lamps are blinking
due to having manually pushed the switch,
the emergency stop signal system does not
operate.
l
l
l
Hazard warning flasher
switch
6
Refer to “Emergency stop signal system” on
page 7-38.
Use the hazard warning flasher switch when
the vehicle has to be parked on the road for
any emergency.
The hazard warning flashers can always be
operated, regardless of the operation mode.
Push the switch to turn on the hazard warning
flashers, all turn-signal lamps flash continu-
ously. To turn them off, push the switch
again.
ECO mode switch
NOTE
ECO mode is an eco-driving support system
which automatically controls the Plug-in Hy-
brid EV System and air conditioning system
to improve fuel efficiency.
When the ECO mode is active, your vehicle
will slowly accelerate even when you press
the accelerator pedal.
Refer to “Automatic climate control air con-
ditioner” on page 8-06.
The ECO mode starts working by pressing
the ECO mode switch when the operation
mode of the power switch is in ON. Push the
switch again and the ECO mode will cancel.
Even if the ECO mode is selected, after put-
l
ting the operation mode of the power switch
in OFF and then in ON again, the ECO
mode is set to OFF.
Even if the ECO mode is operating, you can
select normal operation of the air condition-
er.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA) or the Smart-
phone-link Display Audio (SDA) navigation
system, it is possible to change the setting by
means of screen operations.
l
Refer to the separate owner’s manual for de-
tails.
Instruments and controls
6-67
OGGE20E1
