Maintenance -> Engine oil for Your Mitsubishi Outlander SUV 2020

Engine oil  
The engine oil used has a significant effect on  
the engine’s performance, service life and  
startability. Be sure to use oil of the recom-  
mended quality and appropriate viscosity.  
All engines consume a certain amount of oil  
during normal operation. Therefore, it is im-  
portant to check the oil level at regular inter-  
vals or before starting a long trip.  
1. Park the vehicle on a horizontal surface.  
2. Switch off the engine.  
NOTE  
NOTE  
For vehicles equipped with the security  
alarm system, if you drive with the bonnet  
left open, a warning display is displayed on  
the information screen in the multi informa-  
tion display.  
The engine oil will deteriorate rapidly if the  
vehicle is subjected to severe conditions, re-  
quiring earlier oil replacement.  
Please refer to the maintenance schedule.  
For information on how to dispose of used  
engine oil, refer to page 2-21.  
l
l
l
Recommended engine oil vis-  
cosity  
3. Wait a few minutes.  
4. Remove the dipstick and wipe it with a  
clean cloth.  
5. Reinsert the dipstick as far as it goes.  
6. Remove the dipstick and read the oil lev-  
el, which should always be within the  
range indicated.  
7. If the oil level is below the specified  
limit, remove the cap located on the cyl-  
inder head cover and add enough oil to  
raise the level to within the specified  
range. Do not overfill to avoid engine  
damage. Be sure to use the specified en-  
gine oil and do not mix various types of  
oil.  
Engine oil  
To check and refill engine oil  
11  
FULL LOW  
Select engine oil of the proper SAE vis-  
cosity number according to the atmos-  
pheric temperature.  
Use engine oil conforming to the follow-  
ing classification:  
l
l
8. After adding oil, close the cap securely.  
9. Confirm the oil level by repeating step 4  
to 6.  
• API classification: “For service SM”  
or higher  
• ILSAC certificated oil  
• ACEA classification:  
“For service A3/B3, A3/B4 or A5/B5”  
Maintenance  
11-05  
OGGE20E1  
Engine coolant/Plug-in hybrid EV system coolant  
The coolant level in this tank should be kept  
To add coolant  
NOTE  
between the “LOW” and “FULL” marks  
when measured while the engine and the  
plug-in hybrid EV system are cold.  
Use of additives is not recommended since  
they may reduce the effectiveness of addi-  
tives already included in the engine oil. It  
may result in failure of the mechanical as-  
sembly.  
l
The cooling system is a closed system and  
normally the loss of coolant should be very  
slight. A noticeable drop in the coolant level  
could indicate leakage. If this occurs, we rec-  
ommend you to have the system checked as  
soon as possible.  
If the level should drop below the “LOW”  
level on the reserve tank, open the lid and  
add coolant.  
Engine coolant/Plug-in  
hybrid EV system coolant  
Also, if the reserve tank is completely empty,  
remove the radiator cap (C) or the reserve  
tank cap (D) and add coolant until the level  
reaches the filler neck.  
To check the coolant level  
A transparent engine coolant reserve tank (A)  
and EV cooling system reserve tank (B) is lo-  
cated in the engine compartment.  
WARNING  
Do not open the radiator cap (C) and the  
l
11  
reserve tank cap (D) while the engine and  
the plug-in hybrid EV system are hot. The  
coolant system is under pressure and any  
hot coolant escaping could cause severe  
burns.  
FULL  
FULL  
LOW  
LOW  
11-06  
Maintenance  
OGGE20E1  
Washer fluid  
Below -35 °C: 60 % concentration of anti-  
freeze  
The concentration should be checked before  
the start of cold weather and anti-freeze add-  
ed to the system if necessary.  
Anti-freeze  
The engine coolant and the plug-in hybrid  
EV system coolant contains an ethylene gly-  
col anti-corrosion agent. Some parts of the  
engine and the plug-in hybrid EV system are  
cast aluminium alloy, and periodic changing  
of the engine coolant and the plug-in hybrid  
EV system coolant are necessary to prevent  
corrosion of these parts.  
CAUTION  
Washer fluid  
Do not use alcohol or methanol anti-freeze  
l
or any engine coolants mixed with alcohol  
or methanol anti-freeze. The use of an im-  
proper anti-freeze can cause corrosion of the  
aluminium components.  
Open the washer fluid reservoir cap and  
check the level of washer fluid with the dip-  
stick.  
If the level is low, replenish the container  
with washer fluid.  
Do not use water to adjust the concentration  
of coolant.  
l
Concentrations exceeding 60 % will result in  
Use “MITSUBISHI MOTORS GENUINE  
SUPER LONG LIFE COOLANT PREMI-  
UM” or equivalent*.  
l
a reduction of both the anti-freeze and cool-  
ing performance thus adversely affecting the  
engine.  
MITSUBISHI MOTORS GENUINE Coolant  
has excellent protection against corrosion and  
rust formation of all metals including alumi-  
nium and can avoid blockages in the radiator,  
heater, cylinder head, engine block, etc.  
Because of the necessity of this anti-corro-  
sion agent, the coolant must not be replaced  
with plain water even in summer. The re-  
quired concentration of anti-freeze differs de-  
pending on the expected ambient tempera-  
ture.  
Do not top up with water only.  
l
Water by itself reduces the rust-protective  
and anti-freeze qualities of the coolant and  
has a lower boiling point. It can also cause  
damage to the cooling system if it should  
freeze. Do not use tapwater, as it can cause  
corrosion and rust formation.  
EMPTY  
FULL  
11  
During cold weather  
If the temperatures in your area drop below  
freezing, there is the danger that the coolant  
in the engine, plug-in hybrid EV system or  
radiator could freeze and cause severe dam-  
age to the engine and/or radiator. Add a suffi-  
cient amount of anti-freeze to the coolant to  
prevent it from freezing.  
NOTE  
The washer fluid container serves the wind-  
screen, rear window and headlamps.  
l
Above -35 °C: 50 % concentration of anti-  
freeze  
During cold weather  
*similar high quality ethylene glycol based  
non-silicate, non-amine, non-nitrate and  
non-borate coolant with long life hybrid  
organic acid technology  
To ensure proper operation of the washers at  
low temperatures, use a fluid containing an  
anti-freezing agent.  
Maintenance  
11-07  
OGGE20E1