Get Seats and seat belts -> Seat arrangement Guide for Mitsubishi Outlander SUV 2020

Seat arrangement

By operating the front or rear seat, select the desired seat arrangement.

Normal usage

Flat seat ® p. 5-09

Making a luggage area

Folding the rear seats ® p. 5-07

Seat adjustment

Adjust the driver’s seat so that you are com-

fortable and that you can reach the pedals,

steering wheel, switches etc. while retaining

a clear field of vision.

5-02

Seats and seat belts

OGGE20E1

Front seats

WARNING

CAUTION

Make sure the seat is adjusted by an adult or

with adult supervision for correct and safe

operation.

Do not place a cushion or the like between

your back and the seatback while driving.

The effectiveness of the head restraints will

be reduced in the event of an accident.

The reclining mechanism of the front seat’s

seatback is spring loaded, causing it to return

to the vertical position when the lock lever is

operated. When using the lever, sit close to

the seatback or hold it with your hand to

control its return motion.

Front seats

Manual type

Do not attempt to adjust the seat while

driving. This can cause loss of vehicle con-

trol and result in an accident. After ad-

justments are made, ensure the seating is

locked in position by attempting to move

the seat forward and rearward without

using the adjusting mechanism.

Do not allow people or children to ride in

any area of your vehicle that is not equip-

ped with seats and seat belts, and make

sure that everyone travelling in your vehi-

cle is in a seat and wearing a seat belt, or

in the case of a child is strapped in a child

restraint.

To minimize the risk of personal injury in

the event of a collision or sudden braking,

the seatbacks should always be in the al-

most upright position while the vehicle is

in motion. The protection provided by the

seat belts may be reduced significantly

when the seatback is reclined. There is

greater risk that the passenger will slide

under the seat belt, resulting in serious in-

jury, when the seatback is reclined.

When sliding the seats, be careful not to

catch your hand or foot.

When adjusting the front seat while the rear

seat is folded, be careful not to apply strong

force to the flipped rear seat cushion.

Doing so could cause damage to the cover of

the front seat and the fitting of the rear seat

cushion.

Do not place objects under the seats. This

could prevent the seat from locking se-

curely, and it could lead to an accident. It

may also cause damage to the seat or oth-

er parts.

1- To adjust forward or backward

Lift the handle and adjust the seat to the

desired position, and release the handle.

Seats and seat belts

5-03

OGGE20E1

Front seats

2- To recline the seatback

3- To adjust seat height

Power type*

Pull the lever up and then lean backward

to the desired position, and release the

lever.

Operate the switch as indicated by the

arrows and adjust the seat height to the

desired position.

3- To adjust seat height (driver’s side only)

Repeatedly operate the lever and adjust

the seat height to the desired position.

4- To adjust the lumbar support (driver’s

side only)

If the entire switch is operated, then the

entire seat moves.

4- To adjust the lumbar support (driver’s

side only)

Operate the switch as indicated by the

arrows and adjust the lumbar support to

the desired position.

Operate the switch as indicated by the

arrows and adjust the lumbar support to

the desired position.

Heated seats

The heated seats can be operated with the op-

eration mode of the power switch in ON. Op-

erate the switch as indicated by arrows.

The indication lamp (A) will illuminate while

the heater is on.

1- To adjust forward or backward

Operate the switch as indicated by the

arrows and adjust the seat to the desired

position.

2- To recline the seatback

Operate the switch as indicated by the

arrows and adjust the seatback angle to

the desired position.

1 (HI)

- Heater high (for quick heating).

5-04

Seats and seat belts

OGGE20E1

Rear seats

To return to the original position, push it

backward level with the seat.

(neu- - Heater off.

CAUTION

tral po-

sition)

Do not use benzine, kerosene, petrol, alcohol

or other organic solvents when cleaning the

seats. Doing so could damage not only the

seat cover, but also the heater element.

If water or any other liquid is spilled on the

seat, allow it to dry thoroughly before at-

tempting to use the heater. Turn the heater

off immediately if it appears to be malfunc-

tioning during use.

3 (LO) - Heater low (to keep the seat

warm).

CAUTION

Operate in the high position for quick heat-

ing. Once the seat is warm, set the heater to

low to keep it warm. Slight variations in seat

temperature may be felt while using the

heated seats. This is caused by the operation

of the heater’s internal thermostat and does

not indicate a malfunction.

Rear seats

If the following types of persons use the

NOTE

Do not climb or sit on the armrest.

Doing so could damage the armrest.

The top surface of the armrest contains a cup

holder for rear seat occupants.

Refer to “Cup holder” on page 8-84.

heated seats, they might become too hot or

receive minor burns (red skin, heat blisters,

etc.):

Children, elderly or ill people

People with sensitive skin

Excessively tired people

People under the influence of alcohol or

sleep inducing medication (cold medicine,

etc.)

•

Do not place heavy objects on the seat or

stick pins, needles, or other pointed objects

into it.

Do not use a blanket, cushion, or other mate-

rial with high heat insulation properties on

the seat while using the heater; this might

cause the heater element to overheat.

To adjust the seatback, pull the lever up and

adjust the seatback by hand to the desired po-

sition, and release the lever.

Armrest

To use the armrest, fold it down.

Seats and seat belts

5-05

OGGE20E1

Seats and seat belts -> Seat arrangement for Your Mitsubishi Outlander SUV 2020

Popular Manuals