Seats and seat belts -> Seat belt inspection for Your Mitsubishi Outlander SUV 2020

Seat belt inspection  
The SRS driver and front passenger airbags  
are designed to supplement the primary pro-  
tection of the driver and front passenger side  
seat belt systems by providing those occu-  
pants with protection against head and chest  
injuries in certain moderate-to-severe frontal  
collisions.  
The SRS driver’s knee airbag is designed to  
supplement the primary protection of the  
driver’s seat belt system. It can reduce the  
forward movement of the driver’s lower legs  
and provide increased overall body protection  
in certain moderate-to-severe frontal colli-  
sions.  
The SRS side airbags are designed to supple-  
ment properly worn seat belts and provide the  
driver and front passenger with protection  
against chest injuries in certain moderate-to-  
severe side impact collisions.  
The SRS curtain airbags are designed to sup-  
plement properly worn seat belts and provide  
the driver and passenger with protection  
against head injuries in certain moderate-to-  
severe side impact collisions.  
WARNING  
Seat belt inspection  
Do not insert any foreign objects (pieces  
of plastic, paper clips, buttons, etc.) in the  
buckle or retractor mechanism. In addi-  
tion, do not modify, remove or install the  
seat belt. Otherwise, the seat belt may not  
be able to provide adequate protection in  
a collision or other situation.  
l
Check the belts for cuts, worn or frayed web-  
bing and for cracked or deformed metallic  
parts. Replace the belt assembly if it is defec-  
tive.  
5
WARNING  
We recommend you to have all seat belt  
l
assemblies including retractors and at-  
taching hardware inspected after any col-  
lision. We recommend that seat belt as-  
semblies in use during a collision be re-  
placed unless the collision was minor and  
the belts show no damage and continue to  
operate properly.  
Do not attempt to repair or replace any  
l
part of the seat belt assemblies; we recom-  
mend you to have this work done by a  
MITSUBISHI MOTORS Authorized  
Service Point. Incorrect repair or replace-  
ment could reduce the effectiveness of the  
belts and could result in serious injury in  
the event of a collision.  
A dirty belt should be cleaned with neu-  
tral detergent in warm water. After rins-  
ing in water, let it dry in the shade. Do not  
attempt to bleach or re-dye the belts be-  
cause this will affect their characteristics.  
l
Once the pretensioner has been activated,  
it cannot be re-used.  
Supplemental restraint  
system (SRS)-airbag  
l
The SRS is NOT a substitute for the seat  
belts. To ensure the maximum protection dur-  
ing all types of collisions and accidents, all  
occupants, including the passengers as well  
as the driver, must wear their seat belts.  
It must be replaced together with the re-  
tractor.  
The information for SRS airbags includes im-  
portant information concerning the driver’s  
and front passenger’s airbags, the driver’s  
knee airbag, the side airbags and the curtain  
airbags.  
Seats and seat belts  
5-25  
OGGE20E1