over your shoulder to properly judge
distances to other objects.
When the temperature is extremely high or low,
the screen may not clearly display objects. This
is not a malfunction.
•
•
•
HOW TO READ THE DISPLAYED
LINES
The lines which are displayed on the monitor, indi-
cate the vehicle's clearance and distance between
When strong light directly enters the camera
lens, objects may not be displayed clearly. This is
not a malfunction.
j
the obstacle and the bumper A .
Displayed lines indicate the distances between the
obstacle and the bumper as follows:
Vertical lines may be seen in objects on the
screen. This is due to strong reflected light from
the bumper. This is not a malfunction.
0.5 m (1.5 ft) – red
➀
1 m (3 ft) – yellow
2 m (7 ft) – green
3 m (10 ft) – green
The screen may flicker under fluorescent light.
This is not a malfunction.
➁
➂
➃
•
•
The colours of objects on the rear-view monitor
may differ somewhat from those of the actual
object.
SAA0889Z
NOTE
WARNING
Objects on the monitor may not be clear in a
dark place or at night.
The vehicle clearance lines are wider than the
•
•
•
•
actual clearance.
Use the displayed lines as a reference. The
lines are highly affected by the number of oc-
cupants, fuel level, vehicle position, road con-
dition and road grade. Always check with your
eyes directly around the vehicle while revers-
ing.
•
•
If dirt, rain or snow attaches to the transparent
camera cover, the rear-view monitor may not
clearly display objects. Clean the transparent
camera cover.
The lines are indicated as reference distances
to the obstacle.
REAR-VIEW MONITOR SETTING
For details, see the separately provided NissanCon-
nect Owner's Manual.
Do not use alcohol, benzine or thinner to clean
the transparent camera cover. This will cause
discolouration. To clean the transparent camera
cover, wipe with a cloth dampened with diluted
mild cleaning agent and then wipe with a dry
cloth.
•
The distance guide line and the vehicle width
line should be used as a reference only when
the vehicle is on a level paved surface. The dis-
tance viewed on the monitor is for reference
only and may be different than the actual dis-
tance between the vehicle and displayed ob-
jects.
OPERATING TIPS
When the shift lever is shifted to R (Reverse), the
•
NissanConnect display automatically changes
to the rear-view monitor mode.
Do not damage the transparent camera cover
as the NissanConnect display may be adversely
affected.
•
•
When the shift lever is returned to a position
•
other than R (Reverse), it may take some time
until the screen changes. Objects on the screen
may be distorted until they are completely dis-
played.
When reversing the vehicle up a hill, objects
viewed in the monitor are further than they
appear.When reversing the vehicle down a hill,
objects viewed in the monitor are closer than
they appear. Use the inside mirror or glance
•
Do not use body wax on the transparent camera
cover. Wipe off any wax with a clean cloth damp-
ened with mild detergent diluted with water.
Display screen, heater and air conditioner, and audio system 135
