Get Instruments and controls -> Headlight and turn signal switch Guide for Nissan Juke SUV 2020

DEFOGGER SWITCH

HEADLIGHT AND TURN SIGNAL

SWITCH

To turn off the defogger manually, push the defog-

ger switch again.

NISSAN recommends you to consult the local regu-

lations concerning the use of lights.

HEADLIGHT SWITCH

CAUTION

When cleaning the inner side of the window, be

careful not to scratch or damage the electrical

conductors on the surface of the window.

NIC2978

Type A

NIC3762

Lighting

Turn the switch to the

m position:

The front side, tail, number plate and instrument

lights will come on. The indicator light

instrument panel will come on.

in the

NAA1814

Turn the switch to the

m position:

Type B

The headlights will come on and all the other lights

remain on.

The rear window defogger switch will only operate

when the engine is running.

The defogger is used to reduce the moisture, fog or

frost on the rear window surface and outside door

mirror surface (where fitted) to improve the rear

view.

CAUTION

Never leave the light switch on for extended peri-

ods of time while the engine is not running.

When the defogger switch

is pushed, the indica-

➀

tor light

illuminates and the defogger operates

➁

for approximately 20 minutes. After the preset time

has passed, the defogger will turn off automatically.

Instruments and controls 93

To disable the autolight system:

Daytime light system (where fitted)

The front daytime running lights will come on when

the engine is running.

Turn the switch to the

, or

position.

High beam select

When the light switch is turned to the

position, the daytime running lights will turn off.

Autolight system (<AUTO> —

where fitted)

NIC3803

To select the high beam when in the

position, push the lever forward. The high

➀

beam lights come on and the

light illuminates.

indicator

NIC3762

Pull the lever back to select the low beam

➁

➂

The autolight system allows the headlights to be

set so they turn on and off automatically. When ac-

tive, the autolight system will:

(

position).

Pulling the lever towards you will flash the

headlight high beam.

NIC3789

Turn on the headlights, front side, tail, number

•

plate and instrument panel lights automatically

when it gets dark.

DYNAMIC HIGH BEAM ASSISTANT

(where fitted)

A camera-controlled high beam assistant which

changes from low beam to high beam automati-

cally.

Turn off all the lights when it gets light.

•

To activate the autolight system:

1. Turn the headlight switch to the <AUTO> posi-

tion.

2. Place the ignition in the ON position.

94 Instruments and controls

Precautions:

NOTE

Battery save function

If the dynamic high beam assistant cannot func-

tion (for example: up to 15 seconds after start up,

snow covering front camera or similar) the head-

lights will operate as if the switch was in the

manual position. At all times, the status of the dy-

namic high beam assistant status system is

shown by the indicator lights in the instrument

panel. Full dynamic high beam assistant opera-

The battery save feature prevents your vehicle from

discharging the battery after you have left the ex-

ternal lights, map lamps or room lamps on when

exiting the vehicle. This occurs when the ignition is

placed in the OFF or LOCK position after the engine

has been running.

WARNING

The dynamic high beam assistant cannot com-

pensate for road and weather circumstances

while driving. The system saves the driver from

having to operate the switch. The driver always

remains responsible for choosing the correct

light setting.

NOTE

Specific situations in which to operate the head-

light switch manually:

tion is shown by the

system cannot function, only the

indicator light and/or dipped beam indica-

indicator light. If the

The next time the engine is started the external

lights, map lamps or room lamp will come on

again

high beam

In heavy rain, snowy conditions. (general poor

visibility and bad weather conditions).

•

tor light is illuminated, depending on the current

switch position.

Battery save function for external lights:

When the vehicle sensors are dirty, covered or

•

If the ignition is placed in the OFF position after driv-

ing but the external lights are accidentally left on,

the external lights will automatically be switched

off as soon as the driver's door is opened.

To disable the dynamic high beam assistant:

broken.

To turn the dynamic high beam assistant off turn

the headlight switch to the

, or

position.

Dynamic high beam assistant activated:

When the headlight switch is in the <AUTO> posi-

tion, the light sensor detects darkness, and the le-

ver is pushed forward (into high beam position), the

dynamic high beam assistant is operational. The dy-

namic high beam assistant indicator light

the instrument panel is on.

The system operates as follows:

It is possible to leave the external lights on perma-

nently by switching them back on using the head-

light switch while the ignition is still in the LOCK or

OFF position. In this case, the light reminder chime

will sound when the driver's door is opened.

“Friendly Lighting”

The “Friendly Lighting” function is a convenience fa-

cility. It allows you to provide lighting from the ve-

hicle after the ignition has been placed in the LOCK

position and the headlight switch is in the <AUTO>

(where fitted) position. Pulling the headlight switch

toward you once will activate the headlight for ap-

proximately 30 seconds. After that period of time, it

will automatically switch off.

Battery save function for interior light:

The interior light will automatically be switched off

after a period of time if it has been accidentally left

on.

High beam comes on automatically in dark con-

ditions:

If the vehicle speed is over 40 km/h (25 MPH)

and no other road users are recognised.

•

It is possible to pull the headlight switch up to four

times to increase the lighting period up to 2 min-

utes.

The

tionally.

high beam light (blue) comes on addi-

NOTE

High beam turns off automatically:

If the vehicle speed drops below 25 km/h (15

MPH) or other road users are detected.

The “Friendly Lighting” function can be cancelled

by placing the ignition in the ACC or ON position

again.

The

High beam light (blue) turns off.

Instruments and controls 95

FOG LIGHT SWITCH

indicator light will come on. The fog light switch will

return to the OFF position ( — ). For additional infor-

mation, see “Warning lights, indicator lights and au-

dible reminders” earlier in this section.

TURN SIGNAL SWITCH

FRONT FOG LIGHT (where fitted)

To turn the front fog lights off, turn the fog light

switch to the

position again. The front fog lights

and indicator light will turn off. The fog light switch

will return to the OFF position.

REAR FOG LIGHT (where fitted)

The rear fog light should only be used when visibil-

ity is seriously reduced – generally, to less than 100

m (328 ft).

NIC3759

NIC3760

Type A: Rear fog light only

The rear fog lights can be operated in any headlight

Direction indicator

Move the lever up or down

left. When the turn is completed, the turn signal is

automatically cancelled.

switch position (

or <AUTO>), but will

to indicate right or

➀

not operate if the headlight switch is in the <AUTO>

position and low beam is not activated.

To turn the rear fog light on, turn the fog light switch

to the

position. The rear fog light and indicator

Lane change signal

Move the lever only part of the way up or down

to signal a lane change (right or left). The indicator

lights will flash three times before cancelling auto-

matically.

light will come on. The fog light switch will return to

the OFF position ( — ). For additional information,

see “Warning lights, indicator lights and audible

reminders” earlier in this section.

➁

NIC3761

To turn the rear fog light off, turn the fog light switch

NOTE

Type B: Front and rear fog lights

to the

position again.

This feature will only work if the 3 flash turn sig-

nal setting has been set to ON in the Vehicle Set-

tings menu of the vehicle information display (see

“[Vehicle Settings]” earlier in this section).

The front fog lights should only be used when vis-

ibility is seriously reduced – generally, to less than

100 m (328 ft).

The front fog lights can be operated in any head-

light switch position (

or <AUTO>), but

will not operate if the headlight switch is in the

<AUTO> position and low beam is not activated.

To turn the front fog lights on, turn the fog light

switch to the

position. The front fog lights and

96 Instruments and controls

Instruments and controls -> Headlight and turn signal switch for Your Nissan Juke SUV 2020

Popular Manuals