HEADLIGHT AIMING CONTROL
HORN
HEATED STEERING WHEEL
(WHERE FITTED)
HEADLIGHT AIMING CONTROL
SWITCH (where fitted)
NIC4359
NIC4301
NIC4361
To sound the horn, push the centre pad area
the steering wheel.
of
Push the heated steering wheel switch to warm the
steering wheel after the engine starts. The indica-
tor light on the switch will illuminate.
➀
Depending on the number of occupants in the ve-
hicle and the load it is carrying, the headlight axis
may be higher than desired. If the vehicle is travel-
ling on a hilly road, the headlights may directly hit
the rear-view mirror of the vehicle ahead or the
windscreen of an oncoming vehicle. The light axis
can be lowered using the switch located on the driv-
er's side of the instrument panel, next to the steer-
ing wheel.
If the surface temperature of the steering wheel is
below 30°C (86°F), the system will heat the steering
wheel and cycle off and on to maintain a tempera-
ture between 25° and 45°C (77 to 113°F) dependent
on cabin temperature.The indicator light will remain
on as long as the system is on.
The heated steering wheel system is automatically
turned off after 30 minutes. Push the switch again
to turn the heated steering wheel system off manu-
ally. The indicator light will turn off.
The higher the number designated on the switch,
the lower the axis.
When travelling with no heavy load on a flat road,
select position 0.
NISSAN recommends consulting local regulations
on the use of lights.
Instruments and controls 97
