To fully open the window, push the power window
switch down to the second detent and release the
switch. To fully close the window, pull the power
window switch up to the second detent and release
the switch. The switch does not have to be held
during window operation.
NOTE
Passenger's window switch
The auto-reverse function is only available for
windows with the automatic function.
If the windows do not close
automatically
To stop the window open/close operation during
the automatic function, push down or pull up the
switch in opposite direction.
If the power window automatic function (closing
only) does not operate properly, perform the follow-
ing procedure to initialise the power window sys-
tem.
Window timer:
1. Place the ignition in the ON position.
The window timer allows the window switch to be
operated for approximately 45 seconds even if the
ignition is placed in the OFF position. The window
timer will be cancelled when the driver’s or front
passenger’s door is opened or the preset time has
expired.
NIC2133
2. Close the door.
3. Open the window completely by operating the
power window switch.
The passenger's switch can control its correspond-
ing window.
4. Pull the power window switch and hold it to close
the window, and then hold the switch more than
3 seconds after the window is closed completely.
Automatic function
Auto-reverse function:
5. Release the power window switch. Operate the
window by the automatic function to confirm the
initialisation is complete.
WARNING
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
6. Perform steps 2 through 5 above for other win-
dows.
If the power window automatic function does not
operate properly after performing the procedure
above, have your vehicle checked by a NISSAN
dealer or qualified workshop.
The auto-reverse function enables a window to au-
tomatically reverse when something is caught in
the window as it is closing by the automatic func-
tion. When the control unit detects an obstacle, the
window will be lowered immediately.
NIC3879
The automatic operation is available for the switch
Depending on the environment or driving condi-
tions, the auto-reverse function may activate if an
impact or load similar to something being caught in
the window occurs.
that has an
mark on its surface.
The automatic function enables a window to fully
open or close without holding the switch down or
up.
104 Instruments and controls
