DRIVE BELTS
WARNING
Be sure the ignition switch is in the “OFF” or LOCK
position. Otherwise the cooling fan or the engine
may start to operate suddenly.
1. Visually inspect each belt for signs of unusual
wear, cuts, fraying or looseness. If the belt is in
poor condition or loose, have it replaced or ad-
justed by a NISSAN dealer or qualified workshop.
2. Have the belts checked regularly for condition
and tension in accordance with the maintenance
schedule as shown in a separately provided War-
ranty Information and Maintenance booklet.
NDI1825
Intelligent Key
5. Install the lid in the reverse order of removal.
Replacement
1. Slide the locking pin to the unlock position.
6. Operate the buttons to check that the key works
correctly.
2. Remove the key.
Contact a NISSAN dealer or qualified workshop if
you need assistance for battery replacement.
3. Insert a flat blade screwdriver or a suitable tool
into the slot and twist it to open the lid.
4. Replace the battery with a new one with the
same specifications.
For models equipped with Intelligent Key, use the
following battery type:
CR2032
Do not touch the internal circuit and electric
terminals as doing so could cause a malfunc-
tion.
•
Make sure that the + side faces the bottom of
the case, as illustrated.
•
364 Maintenance and do-it-yourself
