BONNET
FUEL-FILLER LID AND CAP
FUEL FILLER LID
1. Pull the bonnet lock release lever , located be-
low the left side of the instrument panel, the bon-
net will spring up slightly.
➀
2. Push the lever , at the front of the bonnet, to
➁
the left with your fingertips and raise the bonnet.
3. Insert the support rod
frame behind the headlight unit.
into the slot on the
➂
4. When closing the bonnet,replace the support rod
in its original position, then lower the bonnet to
a height of approximately 200 mm (8 inches)
above the closed position and drop. Make sure it
locks into place.
NIC3809
To open the fuel filler lid, push the rear part of the lid
inwards, it will then release the latch and open. To
lock, close the fuel filler lid securely.
WARNING
Always check whether the bonnet is closed and
locked securely to prevent it from opening while
driving. The vehicle should only be operated with
the bonnet securely closed.
NOTE
When the vehicle doors are locked, the fuel filler
lid is also locked, and can't be opened until the
vehicle doors are unlocked again.
NIC3836
122 Pre-driving checks and adjustments
