Pre-driving checks and adjustments -> Electric parking brake for Your Nissan Juke SUV 2020

ELECTRIC PARKING BRAKE  
(where fitted)  
Before driving, check that the brake warning light  
goes out. For additional information, see “Warn-  
ing lights, indicator lights and audible reminders” in  
the “2. Instruments and controls” section.  
The electric parking brake also has an auto apply  
and auto release function.  
Manual transmission vehicles:  
The parking brake will automatically release when  
you drive away using the accelerator.  
SPA2110Z  
NIC4308  
With the vehicle stationary, the electronic parking  
brake is automatically applied when one of the fol-  
lowing occurs:  
Right hand drive  
To apply the parking brake, pull the parking brake  
The engine is turned off.  
lever up  
.
The driver's seat belt is unfastened.  
To release the parking brake, firmly depress and  
hold the footbrake pedal. Pull up the parking brake  
lever slightly, push and hold the button and lower  
The driver's door is opened.  
Automatic (DCT) transmission vehicles:  
the lever completely  
.
The parking brake will automatically release when  
you drive away using the accelerator with the shift  
lever in D (Drive) or R (Reverse). For safety reasons,  
parking brake will not release automatically when  
the driver door is open. With the vehicle stationary,  
the electronic parking brake is automatically ap-  
plied when one of the following occurs:  
Before driving, be sure that the brake warning light  
has turned off.  
NIC4307  
Left hand drive  
The electric parking brake can be applied or re-  
The engine is turned off.  
j
leased by operating the parking brake switch A .  
The driver's seat belt is unfastened.  
j
To apply: Pull the switch A up  
the indicator light  
will illuminate.  
The driver's door is opened.  
To release: With the ignition in the ON position, de-  
The shift lever is moved from D (Drive) or R (Re-  
j
press the brake pedal and push the switch A down  
. The indicator light will turn off.  
verse) to P (Park).  
124 Pre-driving checks and adjustments  
To keep the electric parking brake released after  
turning off the ignition:  
NOTE  
the parking brake switch indicator light will  
continue to illuminate for a short period of  
time.  
Abuzzerwillsoundifthevehicleisdrivenwith-  
Vehicle with key ignition switch:  
out releasing the parking brake. See “Audible  
reminders” in the “2. Instruments and  
controls” section.  
While the ignition is in the ON position, press the  
CAUTION  
brake pedal and push the parking brake switch  
To park the vehicle in cold climates place the shift  
lever in 1st (1) or Reverse (R) (or in Park (P) for au-  
tomatic (AT) vehicles), and place suitable chocks  
at both the front and back of a wheel with the  
electric parking brake released. If the electric  
parking brake is applied in cold climates, the  
brake may become frozen and cannot be  
released.  
j
A , while placing the ignition in the OFF position.  
While the electric parking brake is applied or  
released,an operating sound is heard from the  
lower side of the rear seat. This is normal and  
does not indicate a malfunction.  
Vehicle with push-button ignition switch:  
While the engine is running, press the brake  
pedal and push the parking brake switch A , be-  
j
When the electric parking brake is frequently  
applied and released in a short period of time,  
the parking brake may not operate in order to  
prevent the parking brake system from over-  
heating. If this occurs, operate the electric  
parking brake switch again after waiting ap-  
proximately 1 minute.  
fore placing the ignition in the OFF position.  
WARNING  
Be sure the electric parking brake is released  
before driving. Failure to do so could cause  
brake failure and lead to an accident.  
DRIVING AWAY WHEN TOWING A  
TRAILER  
Please note the following points to prevent the ve-  
hicle from rolling back unintentionally on a gradi-  
ent.  
Do not release the parking brake from outside  
the vehicle.  
The electric parking brake can only be  
released with the ignition in the ON position.  
To help avoid risk of injury or death through  
unintended operation of the vehicle and/or its  
systems, do not leave children, people who re-  
quire the assistance of others or pets unat-  
tended in your vehicle. Additionally, the tem-  
perature inside a closed vehicle on a warm day  
can quickly become high enough to cause a  
significant risk of injury or death to people and  
pets.  
If the electric parking brake must be applied  
while driving in an emergency,pull up and hold  
the parking brake switch. When you release  
the parking brake switch, the parking brake  
will be released.  
Pull and hold the parking brake switch and press  
the accelerator. The parking brake will remain  
engaged and prevent any tendency to roll back  
down the slope.  
While pulling up the electric parking brake  
switch while driving, the parking brake is ap-  
plied and a chime sounds. The parking brake  
indicator light in the meter and in the parking  
brake switch illuminate. This does not indicate  
a malfunction. The electric parking brake indi-  
cator lights in the meter and in the parking  
brake switch turn off when the parking brake  
is released.  
You can release the parking brake switch as  
soon as the engine is delivering enough power  
to the wheels.  
Depending on the weight of the vehicle and trailer  
and the steepness of the slope, there may be a ten-  
dency to roll back downhill when driving away from  
a standstill. You can prevent this by pulling up the  
parking brake switch as you press the accelerator  
(in the same way as with a conventional handbrake).  
Before leaving the vehicle, confirm that the ve-  
hicle is held by the parking brake or  
transmission.  
When pulling the electric parking brake switch  
up with the ignition in the OFF or ACC position,  
Pre-driving checks and adjustments 125