Get Pre-driving checks and adjustments -> How to use the Automatic Brake Hold function Guide for Nissan Juke SUV 2020

AUTOMATIC BRAKE HOLD

(where fitted)

The automatic brake hold function maintains the

braking force without the driver having to depress

the brake pedal when the vehicle is stopped (for

example, at a set of traffic lights or intersection). As

soon as the driver depresses the accelerator pedal

again with the vehicle in gear, the automatic brake

hold function is deactivated and the braking force is

released. The operating status of the automatic

brake hold can be displayed on the Vehicle Informa-

tion Display.

Make sure to place the shift lever in the P (Park)

position and apply the parking brake (Auto-

matic (DCT) Transmission models) or apply the

parking brake (Manual Transmission model)

when parking your vehicle or loading luggage.

Failure to do so could cause the vehicle to

move or roll away unexpectedly and result in

serious personal injury or property damage.

•

HOW TO ACTIVATE/DEACTIVATE

THE AUTOMATIC BRAKE HOLD

FUNCTION

Activation of the automatic brake hold

function

CAUTION

WARNING

If any of the following conditions occur, the au-

tomatic brake hold function may not function.

Have the system checked by a NISSAN dealer

or qualified workshop promptly.

The automatic brake hold function is not de-

•

signed to hold the vehicle on a steep hill or

slippery road. Never use the automatic brake

hold when the vehicle is stopped on a steep

hill or slippery road. Failure to do so may cause

the vehicle to move.

–

A warning message appears in the Vehicle

Information Display.

NIC4309

–

The indicator light of the automatic brake

hold switch does not illuminate when the

switch is pushed.

The automatic brake hold warning may ap-

•

1. With the ignition switch in the ON position, press

pear in the Vehicle Information Display to re-

quest that the driver retake control by

depressing the brake pedal.

the automatic brake hold switch . The indicator

➀

light of the automatic brake hold switch

nates.

illumi-

The automatic brake hold function will not be

activated if the Slip indicator light, electronic

parking brake warning light or the master

warning light illuminate, and the chassis con-

trol system fault message appears in the Ve-

hicle Information Display.

➁

•

When the automatic brake hold function is ac-

•

2. When the automatic brake hold function

becomes standby, the automatic brake hold in-

dicator (white) illuminates on the Vehicle Infor-

mation Display.

tivated, but fails to maintain the vehicle at a

standstill, depress the brake pedal to stop the

vehicle. If the vehicle unexpectedly moves due

to the outside conditions, the chime may

sound and the automatic brake hold warning

may appear in theVehicle Information Display.

In this instance re-apply brake pressure to en-

sure the vehicle is held.

To maintain the braking force to keep the ve-

hicle to a standstill, a noise may be heard. This

is not a malfunction.

To use the automatic brake hold function, the

following conditions need to be met:

The driver's seat belt is fastened.

•

The electronic parking brake is released.

•

Besuretodeactivatetheautomaticbrakehold

function when using a car wash or towing your

vehicle.

•

The shift lever is not in the P (Park) position

(Automatic (DCT) Transmission models).

•

The vehicle is not parked on a steep hill.

•

126 Pre-driving checks and adjustments

NOTE

indicator illuminates green on the meter the brake

force is automatically applied without your foot de-

pressed on the brake pedal.

For Manual Transmission models:

When the parking brake is applied with the brake

force maintained by the automatic brake hold func-

tion, the brake force of the automatic brake hold

will be released. The automatic brake hold indicator

turns off.

The automatic brake hold function retains the

last state even if the engine is restarted.

Deactivation of the automatic brake

hold function

CAUTION

Confirm the indicator changes to green before re-

moving your foot from the brake pedal.

While the automatic brake hold function is

activated, press the automatic brake hold switch to

turn off the automatic brake hold indicator light and

deactivate the automatic brake hold function. To

deactivate the automatic brake hold function while

the brake force has been maintained by the auto-

matic brake hold function, depress the brake pedal

and press the automatic brake hold switch.

NOTE

Under the following conditions, the parking

•

To start the vehicle from standstill

For Automatic (DCT) Transmission models:

With the shift lever not in the P (Park) or N (Neutral)

position, depress the accelerator pedal while the

brake force is maintained. The brake force will auto-

matically be released to restart the vehicle.

brake will automatically be applied and the

brake force of the automatic brake hold will be

released.

–

The braking force is applied by the auto-

matic brake hold function for 3 minutes or

longer.

CAUTION

–

The driver's side door is opened.

For Manual Transmission models:

Make sure to firmly depress and hold the brake

pedal when turning off the automatic brake hold

function while the brake force applied. When the

automatic brake hold function is deactivated, the

brake force will be released. This could cause the

vehicle to move or roll away unexpectedly and

result in an accident.

With the shift lever in gear, release the clutch pedal

and apply the accelerator pedal to release the auto-

matic brake hold. The automatic brake hold system

will return to standby and the automatic brake hold

indicator illuminates in white.

The electric parking brake switch is pulled

up manually.

–

The driver's seat belt is unfastened.

The ignition is placed in the OFF position.

If a malfunction occurs in the automatic

brake hold function.

Parking

For Automatic (DCT) Transmission models:

–

The shift lever is placed in the P (Park) po-

sition (Automatic (DCT) Transmission mod-

els).

When the shift lever is in the P (Park) position with

the brake force maintained by the automatic brake

hold function, the parking brake will automatically

be applied and the brake force of the automatic

brake hold will be released. The automatic brake

hold indicator turns off. When the parking brake is

applied with the brake force maintained by the au-

tomatic brake hold function, the brake force of the

automatic brake hold will be released. The auto-

matic brake hold indicator turns off.

HOW TO USE THE AUTOMATIC

BRAKE HOLD FUNCTION

To maintain braking force

When the vehicle stops, but the brake force is

not automatically applied, depress the brake

pedal firmly until the automatic brake hold in-

dicator (green) illuminates.

•

automatically

With the automatic brake hold function activated

and the automatic brake hold indicator (white) illu-

minated on the meter, depress the braking pedal to

stop the vehicle. When the automatic brake hold

Pre-driving checks and adjustments 127

STEERING WHEEL

SUN VISORS

NIC3900

NIC4310

NPA839Z

Automatic brake hold function display

(7 inch display only)

The automatic brake hold function status can be

checked in the [Chassis Control] mode in the Ve-

hicle Information Display. All four wheels will be

highlighted when the system is active.

WARNING

CAUTION

Do not adjust the steering wheel while driving.

You could lose control of your vehicle and cause

an accident.

Do not store the sun visor before returning it to its

original position.

1. To block out glare from the front, move the main

sun visor downwards.

Release the lock lever A as illustrated and adjust

the steering wheel to the desired position (forwards

2. To block glare from the side, remove the main

sun visor from the centre mount and move it to

the side.

or backwards , up or down ). Firmly push the

➀

➁

lock lever back into position to lock the steering

wheel in place.

128 Pre-driving checks and adjustments

Pre-driving checks and adjustments -> How to use the Automatic Brake Hold function for Your Nissan Juke SUV 2020

Popular Manuals