Starting and driving -> Ignition switch for Your Nissan Juke SUV 2020

IGNITION SWITCH (where fitted)  
NOTE  
STEERING LOCK  
For vehicles fitted with Stop/Start System:  
To lock the steering wheel, turn the ignition switch  
to the LOCK position and remove the key from the  
ignition switch, then turn the steering clockwise. To  
unlock the steering wheel, insert the ignition key  
and turn it gently while rotating the steering wheel  
slightly right and left.  
When the engine is automatically stopped by the  
Stop/Start System the ignition switch can still be  
operated as usual.  
At the end of a journey turn the ignition OFF to  
avoid a flat battery. The Stop/Start System does  
not automatically turn ignition off.  
The ignition key can only be removed when the  
switch is in the LOCK position (Normal parking posi-  
tion) (0).  
NISSAN ANTI-THEFT SYSTEM (NATS)  
(where fitted)  
The NISSAN Anti Theft System (NATS)* will stop the  
engine if someone tries to start the engine without  
using the registered NATS key.  
NSD477  
KEY POSITIONS  
LOCK (Normal parking position) (0)  
The ignition key can only be removed when in this  
position.  
OFF  
WARNING  
* Immobilizer  
Never remove the key or turn the ignition switch  
to the LOCK position while driving. The steering  
wheel will lock and could cause the driver to lose  
control of the vehicle. This could result in serious  
vehicle damage or personal injury.  
The steering lock can only be locked in this position.  
If you failed to start the engine using the NATS Key,  
turn the ignition knob to the LOCK position, wait for  
5 seconds and turn the key to the START position  
again to start the engine.  
OFF/ACC (Accessories)/ (1)  
The engine is turned off without locking the steer-  
ing wheel. This position activates electrical acces-  
sories, such as the radio, when the engine is not  
running.  
For additional information, see “NISSAN Anti-Theft  
System (NATS) (where fitted)” in the “3. Pre-driving  
checks and adjustments” section.  
CAUTION  
ON (Normal operating position) (2)  
This position turns on the ignition system and elec-  
trical accessories.  
Use electrical accessories with the engine run-  
ning to avoid discharging the vehicle battery. If  
you must use accessories while the engine is not  
running, do not use them for extended periods of  
time and do not use multiple electrical accesso-  
ries at the same time.  
START (3)  
The engine starter activates and the engine will  
start. As soon as the engine has started, release the  
key immediately. It will return to the ON position.  
The switch includes an anti-theft steering lock de-  
vice.  
Starting and driving 195