Get Starting and driving -> Push-button ignition switch Guide for Nissan Juke SUV 2020

PUSH-BUTTON IGNITION

SWITCH (where fitted)

If the Intelligent Key is too far away from the

driver, the vehicle may not start.

If the Intelligent Key is within the operating range, it

is possible for anyone, even someone who does not

carry the Intelligent Key, to push the ignition switch

to start the engine.

•

PRECAUTIONS ON PUSH-BUTTON

IGNITION SWITCH OPERATION

If the vehicle battery is discharged, the igni-

tion switch cannot be switched from the

“LOCK” position, and if the steering lock is en-

gaged, the steering wheel cannot be moved.

Charge the battery as soon as possible (See

“Jump starting” in the “6. In case of

emergency” section.)

WARNING

The luggage room area is not included in the

operating range, but the Intelligent Key may

function.

•

Do not operate the push-button ignition switch

while driving the vehicle except in an emergency.

(The engine will stop when the ignition switch is

pushed 3 consecutive times in quick succession

or the ignition switch is pushed and held for more

than 2 seconds.) If the engine stops while the ve-

hicle is being driven, this could lead to a crash and

serious injury.

If the Intelligent Key is placed on the instrument

•

panel, inside the glove box, door pocket or the

corner of the interior compartment, the Intelli-

gent Key may not function.

Operating range

If the Intelligent Key is placed near the door or

window outside the vehicle, the Intelligent Key

may function.

•

Before operating the push-button ignition switch:

Move the shift lever to the N (Neutral) position or

depress the clutch pedal (for Manual Transmis-

sion (MT) models).

•

Move the shift lever to the P (Park) position (for

Automatic (DCT) transmission models).

•

INTELLIGENT KEY SYSTEM

NIC3783

The Intelligent Key system can operate the ignition

switch without taking the key out from your pocket

or bag. The operating environment and/or condi-

tions may affect the Intelligent Key system opera-

tion.

The Intelligent Key can only be used for starting the

engine when the Intelligent Key is within the speci-

fied operating range

as illustrated.

➀

When the Intelligent Key battery is almost

discharged or strong radio waves are present near

the operating location, the Intelligent Key system’s

operating range becomes narrower and may not

function properly.

CAUTION

Be sure to carry the Intelligent Key with you

•

when operating the vehicle.

Never leave the Intelligent Key inside the ve-

hicle when you leave the vehicle.

•

196 Starting and driving

The “LOCK” position will automatically be activated

when any door is either opened or closed with the

switch in the “OFF” position.

LOCK position (normal parking

position)

The ignition switch and steering lock can only be

locked at this position.

IGNITION SWITCH POSITIONS

Some indicators and warnings for operation are dis-

played on the vehicle information display. See “Ve-

hicle information display” in the “2. Instruments and

controls” section.

The ignition switch will lock when any door is

opened or closed with the ignition switched off.

Automatic (DCT) transmission:

ON position (normal operating

position)

This position turns on the ignition system and elec-

trical accessories.

When pushing the ignition switch to the “OFF” posi-

tion, make sure the shift lever is in the P (Park) posi-

tion.

NIC4343

The shift lever can be moved from the P (Park) posi-

tion if the ignition switch is in the “ON” position and

the brake pedal is depressed.

Left hand drive

Battery saver system:

The ignition position “ON” has a battery saver fea-

ture. If the vehicle is not running, after a period of

time, the ignition will automatically switch to the

“OFF” position.

If the battery of the vehicle is discharged, the push-

button ignition switch cannot be moved from the

“LOCK” position.

The battery saver feature will be suspended if the

ignition switch position is changed.

OFF position

The ignition switch is in the OFF position when the

engine is turned off using the ignition switch. No

lights will illuminate on the ignition switch.

CAUTION

Use electrical accessories with the engine run-

ning to avoid discharging the vehicle battery. If

you must use accessories while the engine is not

running, do not use them for extended periods of

time and do not use multiple electrical accesso-

ries at the same time.

ACC position

NIC4342

With the vehicle in the P (Park) position, the Intelli-

gent key with you and the ignition placed from “ON”

to “OFF”, the radio can still be used for a period of

time, or until the driver’s door is opened.

Right hand drive

When the ignition switch is pushed without

depressing the brake pedal, the ignition switch will

illuminate:

After a period of time, functions such as radio, navi-

gation, and Bluetooth® Hands-Free Phone System

may be restarted by pressing the POWER ON-OFF

button/VOLUME control knob or the key fob unlock

button up to a total of 30 minutes.

Push the centre of the ignition switch:

Once to change it to the “ON” position.

•

Two times to change it to the “OFF” position.

•

Starting and driving 197

NOTE

EMERGENCY ENGINE SHUT OFF

To shut off the engine in an emergency situation

while driving, perform the following procedure:

INTELLIGENT KEY BATTERY

DISCHARGE

When the ignition switch is pushed to the

•

“ACC” or “ON” position or the engine is started

by the above procedures, the Intelligent Key

system warning light may blink in yellow (on

the meter) even if the Intelligent Key is inside

the vehicle. This is not a malfunction.

Rapidly push the push-button ignition switch 3

•

consecutive times in less than 1.5 seconds, or

Push and hold the push-button ignition switch

for more than 2 seconds.

•

If the Intelligent Key system warning light in

the meter is blinking in green, replace the bat-

tery as soon as possible. (See “Integrated key

fob/Intelligent Key battery replacement” in

the “8. Maintenance and do-it-yourself” sec-

tion.)

•

STEERING LOCK

The ignition switch is equipped with an anti-theft

steering lock device.

SSD0860Z

To lock steering wheel

1. Push the ignition switch to the “OFF” position

where the ignition switch position indicator will

not illuminate.

If the battery of the Intelligent Key is discharged, or

environmental conditions interfere with the Intelli-

gent Key operation, start the engine according to

the following procedure:

2. Open or close the door. The ignition switch turns

to the “LOCK” position.

1. Move the shift lever to the P (Park) (Automatic

(DCT) transmission models) or N (Neutral) (MT

models) position.

3. Turn the steering wheel 1/6 of a turn to the right

or left from the straight up position.

To unlock steering wheel

Push the ignition switch to “ACC”, and the steering

wheel will be automatically unlocked.

2. Firmly apply the footbrake.

3. Depress the clutch pedal to the floor (MT models)

4. Touch the ignition switch with the Intelligent Key

as illustrated. (A chime will sound.)

CAUTION

5. Push the ignition switch while depressing the

brake pedal within 10 seconds after the chime

sounds. The engine will start.

If the battery of the vehicle is discharged, the

push-button ignition switch cannot be

switched from the “LOCK” position.

•

After step 4 is performed, when the ignition switch

is pushed without depressing the brake pedal, the

ignition switch position will change to “ON”.

If the ignition switch position does not change

•

from the “LOCK” position, push the ignition

switch again while rotating the steering wheel

slightly to the right and left.

198 Starting and driving

Starting and driving -> Push-button ignition switch for Your Nissan Juke SUV 2020

Popular Manuals