Maintenance and do-it-yourself -> Lights for Your Nissan Patrol SUV Sixth Generation (2010-2023)

LIGHTS  
How to remove the extended storage fuse  
switch:  
1. To remove the extended storage fuse  
switch, be sure the ignition switch is in the  
“OFF” or “LOCK” position.  
Replacing halogen headlight bulb:  
High beam bulb  
1. Disconnect the battery negative cable.  
HEADLIGHTS  
Fog may temporarily form inside the lens of the  
exterior lights in the rain or in a car wash. A  
temperature difference between the inside and  
the outside of the lens causes the fog. This is  
2. Disconnect the electrical connector from  
the rear end of the bulb.  
not  
a malfunction. If large drops of water  
2. Be sure the headlight switch is in the “OFF”  
3. Turn and remove the headlight bulb. Do not  
shake the bulb when removing it.  
collect inside the lens, contact a NISSAN dealer.  
position.  
3. Remove the fuse box cover.  
Replacing LED headlight  
If replacement is required, contact a NISSAN  
dealer.  
4. Install the new bulb in the reverse order of  
4. Pinch the locking tabs  
found on each  
removal.  
side of the storage fuse switch.  
5. Pull the storage fuse switch straight out  
CAUTION:  
Replacing halogen headlight bulb (if equipped)  
from the fuse box  
.
.
.
When handling the bulb, do not touch the  
glass envelope.  
Use the same number and wattage as  
originally installed:  
High beam bulb: 65W (H9)  
.
Do not leave the bulb out of the headlight  
reflector for a long period of time as dust,  
moisture and smoke may enter the head-  
light body and affect the performance of  
the headlight.  
JVM0823X  
Aiming adjustment is not necessary if only the  
bulbs are replaced. When aiming adjustment is  
necessary, contact a NISSAN dealer.  
The halogen headlight is a semi-sealed beam  
type which uses replaceable headlight (halo-  
gen) bulbs. They can be replaced from inside  
the engine compartment without removing the  
headlight assembly.  
CAUTION:  
High-pressure halogen gas is sealed inside  
the bulb. The bulb may break if the glass  
envelope is scratched or the bulb is dropped.  
Maintenance and do-it-yourself 8-23  
EXTERIOR LIGHTS  
Item  
Wattage (W)  
LED  
Item  
Puddle light* (if equipped)  
Wattage (W)  
28/8  
Front turn signal (for Mex-  
*:  
See a NISSAN dealer for replacement.  
ico)  
INTERIOR LIGHTS  
Item  
Front map light  
Rear personal light  
Cargo light  
Step light (if equipped)  
Vanity mirror light  
Front turn signal* (except  
for Mexico)  
LED  
LED  
Wattage (W)  
8 or LED *  
Clearance light/daytime  
running light*  
8
8
5
1.8  
LED  
Front fog light (for Mexico)  
35  
LED  
Front fog light* (if equipped  
except for Mexico)  
Side turn signal light* (if  
equipped)  
LED  
LED  
Front armrest light* (if  
equipped)  
Front side marker light* (for  
Footwell light* (if equipped)  
Glove box light*  
1.4  
1.4  
Mexico)  
Rear combination light (ex-  
cept for Mexico)  
*:  
See a NISSAN dealer for replacement.  
Turn signal*  
Stop/Tail*  
Reverse light*  
LED  
LED  
LED  
Rear combination light (for  
Mexico)  
Turn signal  
Stop  
21  
21  
Tail*  
LED  
LED  
16  
LED  
5
Side marker*  
Reverse light  
Rear fog light* (if equipped)  
License plate light (for Mex-  
ico)  
License plate light* (except  
for Mexico)  
5
High-mounted stop light*  
LED  
8-24 Maintenance and do-it-yourself  
1.  
Clearance light/Daytime running light  
Headlight (low beam)  
Front map light  
Front turn signal light  
Front fog light (if equipped)  
Headlight (high beam)  
Puddle light (if equipped)  
Step light (if equipped)  
Side turn signal light (if equipped)  
LIGHT LOCATIONS  
Except for Mexico  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10. Tail light  
11. Cargo light  
12. High-mounted stop light  
13. Rear personal light  
14. Rear turn signal light  
15. Stop light  
16. Reverse light  
17. Rear fog light (if equipped)  
18. License plate light  
: Except for NISMO models  
: NISMO models  
WAI0257X  
Maintenance and do-it-yourself 8-25  
9.  
10. Side turn signal light  
11. Tail light  
Step light  
For Mexico  
12. Cargo light  
13. High-mounted stop light  
14. Rear personal light  
15. Rear side marker light  
16. Stop light  
17. Rear turn signal light  
18. Reverse light  
19. License plate light  
JVM0727X  
1.  
Front turn signal light  
Front side marker light  
Front map light  
5.  
6.  
7.  
8.  
Clearance light/Daytime running light  
Front fog light  
Headlight (low beam)  
Puddle light  
2.  
3.  
4.  
Headlight (high beam)  
8-26 Maintenance and do-it-yourself  
Replacement procedures  
JVM0825X  
Front turn signal light (bulb type)  
SDI2628  
Front fog light (for Mexico)  
SDI2306  
1.  
Remove the screws  
and the bolts  
using a suitable tool.  
Remove the clips  
:
:
REMOVE  
INSTALL  
2.  
and remove the  
wheel house inner cover  
.
All other lights are either type A, B, C, D or E.  
When replacing a bulb, first remove the lens  
and/or cover.  
Maintenance and do-it-yourself 8-27  
SDI2525  
SDI2030  
SDI2031  
License plate light (for Mexico)  
Front map light (bulb type)  
Rear personal light  
JVM0335X  
SDI2524  
Rear combination light (bulb type, turn signal and  
stop)  
Reverse light (bulb type)  
Remove the cover  
door.  
on the inside of the back  
1.  
Remove the cover  
by pulling it back-  
ward.  
2.  
Remove the bolts , and gradually pry the  
rear combination light whole unit  
ward.  
out-  
8-28 Maintenance and do-it-yourself