NOTE:
tion will be canceled and the back door can be
operated manually.
Auto reverse function
The back door can be opened by the power
The auto-reverse function enables the back
door to automatically reverse when something
is caught in the back door as it is opening or
closing. When the control unit detects an
obstacle, the back door will reverse and return
to the full open or full close position.
back door switch
button
or the power back door
Safe Mode
even if the back door is
locked. The back door will individually unlock
and open.
Power close
If a second obstacle is detected, the back door
motion will stop and the drive motor will
disengage. The back door will enter the manual
mode.
A pinch sensor is mounted on each side of the
back door. If an obstacle is detected by the
pinch sensor during power close, the back door
will reverse and return to the full open position
immediately.
When the back door is fully opened, the back
door will fully close automatically by:
.
.
.
pushing the power back door switch
the instrument panel
on
on
pushing the power back door button
the Intelligent Key for more than 1 second
pushing the power back door switch
on
SPA2750
the lower part of the back door
The hazard flashes 4 times and the outside
chime sounds when the back door starts
closing.
If the gas stays of the back door
lose
NOTE:
pressure, the power back door safe mode is
activated. When the safe mode is activated, the
back door intermittently closes. Then the back
door will be pulled to the closed and latched
position by a motor.
If the pinch sensor is damaged or removed,
the power close function will not operate.
NOTE:
When the back door is closed, it remains
WARNING:
unlocked. Manually lock the back door.
There is a small distance immediately before
the closed position that cannot be detected.
Make sure that all passengers keep their
hands, etc., clear from the back door opening
before closing the back door.
The power back door cannot be opened using
Reverse function
The power back door will reverse immediately if
one of the following actions is performed
during power open or power close.
the switches at any time in the safe mode.
Do not operate the back door again until it is
checked by a NISSAN dealer.
.
.
.
pushing the power back door switch
on
button
on
CAUTION:
Manual mode
the instrument panel
.
If the power back door does not stay
open or if the back door unexpectedly
closes at any time, do not operate the
back door. There may be a pressure loss
in one or both of the back door gas stays.
If power operation is not available, the back
door can be operated manually. Power opera-
tion may not be available if multiple obstacles
have been detected in a single power cycle or if
the battery voltage is low. When the power
back door main switch is in the OFF position,
the back door can be opened manually by
pushing the back door opener switch. If the
power back door opener switch is pushed
during power open or close, the power opera-
pushing the power back door
on the Intelligent Key.
pushing the power back door switch
the lower part of the back door
The outside chime sounds when the back door
starts to reverse.
Have the back door inspected by
a
NISSAN dealer.
The power back door
button
on the
.
Do not activate the power back door if
one or both of the back door gas stays
are removed. Damage to the back door or
Intelligent Key cannot be operated when the
ignition switch is in the “ON” position depend-
ing on the models.
Pre-driving checks and adjustments 3-21
