KEY FOB BATTERY REPLACEMENT
NOTE:
If the extended storage fuse switch
malfunctions or if the fuse is open, it is
not necessary to replace the switch. In
this case, remove the extended storage
fuse switch and replace it with a new
fuse of the same rating.
How to remove the extended storage
fuse switch:
1. To remove the extended storage fuse
switch, be sure the ignition switch is in
the OFF or LOCK position.
CAUTION
.
.
Be careful not to allow children to
swallow the battery and removed
parts.
An improperly disposed battery
can harm the environment. Al-
ways confirm local regulations
for battery disposal.
When changing batteries, do not
let dust or oil get on the compo-
nents.
There is danger of explosion if the
lithium battery is incorrectly re-
placed. Replace only with the
same or equivalent type.
.
.
2. Be sure the headlight switch is in the
OFF position.
JVM0415X
3. Remove the fuse box cover.
Extended storage fuse switch (if so
equipped)
4. Pinch the locking tabs
found on
each side of the extended storage
fuse switch.
To reduce battery drain, the extended
storage fuse switch comes from the
factory switched off. Prior to delivery of
your vehicle, the switch is pushed in
(switched on) and should always remain
on.
5. Pull the extended storage fuse switch
straight out from the fuse box
.
If the extended storage fuse switch is not
pushed in (switched on), the meter may
display a warning message. See “21. Ship-
ping Mode On Push Storage Fuse warn-
ing” (P.2-33).
If any electrical equipment does not
operate, remove the extended storage
fuse switch and check for an open fuse.
Do-it-yourself 8-21
