Instruments and controls -> Dynamic driver assistance switch for Your Nissan Qashqai SUV 2020

DYNAMIC DRIVER ASSISTANCE SWITCH  
(models without ProPILOT assist)  
The heater is controlled by a thermo-  
stat, automatically turning the heater  
on and off. The indicator light will  
remain on as long as the switch is on.  
the brakes to the left or right wheels  
individually (for a short period of time). For  
additional information, see “Intelligent  
Lane Intervention (I-LI)” (P.5-40).  
When the vehicle’s interior is warmed,  
or before you leave the vehicle, be  
sure to turn off the switch.  
JVI1593X  
The dynamic driver assistance switch is  
used to temporarily turn on and off the  
Intelligent Lane Intervention (I-LI) system.  
The I-LI system must be turned on with  
the dynamic driver assistance switch  
every time the ignition is placed in the  
ON position.  
When the dynamic driver assistance  
switch is turned off, the indicator  
on  
the switch is off. The indicator will also be  
off if the I-LI system is deactivated using  
the vehicle information display.  
The I-LI system warns the driver with an  
indicator and a chime, and helps assist  
the driver to return the vehicle to the  
center of the traveling lane by applying  
Instruments and controls 2-61  
STEERING ASSIST SWITCH (models VEHICLE DYNAMIC CONTROL (VDC)  
with ProPILOT assist) OFF SWITCH  
(P.5-129).)  
WAC0074X  
SIC4544  
The steering assist switch is used to  
temporarily turn on and off the steering  
assist system.  
The vehicle should be driven with the  
Vehicle Dynamic Control (VDC) system on  
for most driving conditions.  
The steering assist system controls the  
steering system to help keep your vehicle  
near the center of the lane when driving.  
For additional information, see “ProPILOT  
assist” (P.5-66).  
If the vehicle is stuck in mud or snow, the  
VDC system reduces the engine output to  
reduce wheel spin. The engine speed will  
be reduced even if the accelerator is  
depressed to the floor. If maximum en-  
gine power is needed to free a stuck  
vehicle, turn the VDC system off.  
To turn off the VDC system, push the VDC  
OFF switch. The  
illuminate.  
indicator light will  
Push the VDC OFF switch again or restart  
the engine to turn on the system. (See  
“Vehicle Dynamic Control (VDC) system”  
2-62 Instruments and controls