Instruments and controls -> Heated seats for Your Nissan Qashqai SUV 2020

HEATED SEATS (if so equipped)  
.
.
.
Any liquid spilled on the heated  
seat should be removed immedi-  
ately with a dry cloth.  
When cleaning the seat, never use  
gasoline, thinner, or any similar  
materials.  
If any malfunctions are found or  
the heated seat does not operate,  
turn the switch off and have the  
system checked. It is recom-  
mended you visit a NISSAN dealer  
for this service.  
WARNING  
Do not use or allow occupants to use  
the seat heater if you or the occu-  
pants cannot monitor elevated seat  
temperatures or have an inability to  
feel pain in body parts that contact  
the seat. Use of the seat heater by  
such people could result in serious  
injury.  
JVR0322X  
CAUTION  
The seats are warmed by built-in heaters.  
The switches located on the center con-  
sole can be operated independently of  
each other.  
1. Start the engine.  
2. Select heat range.  
.
.
.
The battery could run down if the  
seat heater is operated while the  
engine is not running.  
Do not use the seat heater for  
extended periods or when no one  
is using the seat.  
Do not put anything on the seat  
which insulates heat, such as a  
blanket, cushion, seat cover, etc.  
Otherwise, the seat may become  
overheated.  
Do not place anything hard or  
heavy on the seat or pierce it with  
a pin or similar object. This may  
result in damage to the heater.  
For high-speed heating, push the HI  
(High) side of the switch.  
For low-speed heating, push the LO  
(Low) side of the switch.  
The indicator light on the switch will  
.
illuminate when the heater is on.  
3. To turn off the heater, return the  
switch to the level position. Make sure  
the indicator light goes off.  
2-60 Instruments and controls  
DYNAMIC DRIVER ASSISTANCE SWITCH  
(models without ProPILOT assist)  
The heater is controlled by a thermo-  
stat, automatically turning the heater  
on and off. The indicator light will  
remain on as long as the switch is on.  
the brakes to the left or right wheels  
individually (for a short period of time). For  
additional information, see “Intelligent  
Lane Intervention (I-LI)” (P.5-40).  
When the vehicle’s interior is warmed,  
or before you leave the vehicle, be  
sure to turn off the switch.  
JVI1593X  
The dynamic driver assistance switch is  
used to temporarily turn on and off the  
Intelligent Lane Intervention (I-LI) system.  
The I-LI system must be turned on with  
the dynamic driver assistance switch  
every time the ignition is placed in the  
ON position.  
When the dynamic driver assistance  
switch is turned off, the indicator  
on  
the switch is off. The indicator will also be  
off if the I-LI system is deactivated using  
the vehicle information display.  
The I-LI system warns the driver with an  
indicator and a chime, and helps assist  
the driver to return the vehicle to the  
center of the traveling lane by applying  
Instruments and controls 2-61