Get Instruments and controls -> Power outlet Guide for Nissan Qashqai SUV 2020

POWER OUTLET

The power outlet is located in the instru-

ment panel and center console box.

.

When not in use, be sure to close

the cap. Do not allow water or any

liquid to contact the outlet.

CAUTION

.

The outlet and plug may be hot

during or immediately after use.

Do not use with accessories that

exceed

a 12 volt, 120W (10A)

power draw. Do not use double

adapters or more than one elec-

trical accessory.

.

Use power outlet with the engine

running to avoid discharging the

vehicle battery.

Avoid using power outlet when

the air conditioner, headlights or

rear window defroster is on.

This power outlet is not designed

for use with a cigarette lighter

unit.

Push the plug in as far as it will

go. If good contact is not made,

the plug may overheat or the

internal temperature fuse may

open.

WAC0077X

Instrument Panel

.

Before inserting or disconnecting

a

plug, be sure the electrical

WAC0233X

accessory being used is turned

OFF.

Center Console Box

Instruments and controls 2-65

STORAGE

CUP HOLDERS

CAUTION

.

Do not force a USB device into the

connector. Inserting the USB de-

vice tilted or up-side-down into

the connector may damage the

connector. Make sure that the

USB device is connected correctly

into the connector.

Do not use a reversible USB cable.

Using the reversible USB cable

may damage the connector.

.

Avoid abrupt starting and braking

when the cup holder is being

used to prevent spilling the drink.

If the liquid is hot, it can scald you

or your passenger.

Use only soft cups in the cup

holder. Hard objects can injure

you in an accident.

WAC0234X

USB (Universal Serial Bus) CHAR-

GING CONNECTOR

The USB charging connector is located in

the center console box.

The USB charging connector can be used

only for charging an external device.

Connect a USB device into the connector.

Charging will start automatically (max-

imum output up to 5 volt, 12W, 2.4A).

The external device will be charged con-

tinuously while the ignition switch is in

the ACC or ON position.

Some mobile devices cannot be charged

depending on their specifications.

2-66 Instruments and controls

JVI0884X

JVI1601X

JVI0873X

Door (front and rear)

Center console

Rear seat (if so equipped)

The rear cup holders are located in the

rear fold-down armrest.

CARGO AREA

You can use the cargo area in diverse

ways using the flexible luggage boards.

Front

SOFT BOTTLE HOLDERS

WARNING

CAUTION

Do not put objects heavier than 110

lbs (50 kg) on the load floor.

.

Do not use bottle holder for any

other objects that could be

thrown about in the vehicle and

possibly injure people during

sudden braking or an accident.

CAUTION

Do not use bottle holder for open

.

Do not push the front edge of the

luggage board forcibly. Doing so

liquid containers.

Instruments and controls 2-67

may cause the luggage board to

be tilted, resulting in personal

injury.

.

Do not handle the luggage board

forcibly as this may deform it.

While in the upper position, do

not recline the seatbacks.

Do not place cargo higher than

the seatbacks. In a sudden stop

or collision, unsecured cargo

could cause personal injury.

NOTE:

JVI0888X

The diversity of the cargo area may be

restricted depending on the equipment

of each vehicle.

GLOVE BOX

WARNING

Keep glove box lid closed while driv-

ing to help prevent injury in an

accident or a sudden stop.

JVI1620X

1. Pull the outer board upward to 90°.

2. Push down the board until it stops.

To open the glove box, pull the handle.

To close, push the lid in until the lock

latches. The glove box light illuminates

when the headlight switch is turned on.

2-68 Instruments and controls

.

Do not leave sunglasses in the

sunglasses holder while parking

in direct sunlight. The heat may

damage the sunglasses.

To open the sunglasses holder, push and

release. Only store one pair of sunglasses

in the holder.

JVI1685X

JVI0619X

CONSOLE BOX

SUNGLASSES HOLDER

To open the console box lid, push up the

knob and pull up the lid.

To close, push the lid down until the lock

latches.

WARNING

Keep the sunglasses holder closed

while driving to avoid obstructing

the driver’s view and to help prevent

an accident.

CAUTION

.

Do not use for anything other

than sunglasses.

Instruments and controls 2-69

SIC4348

JVI1686X

JVI1336X

Cargo area (hooks for shopping bags, etc.)

Cargo area

CARD HOLDER (driver’s side)

Slide a card in the card holder.

LUGGAGE HOOKS

To use the hook, pull it up as illustrated.

WARNING

Do not apply a total load of more

than 7 lb (3 kg) to the hook.

WARNING

.

Always make sure that the cargo

is properly secured. Use the sui-

table ropes and hooks.

Unsecured cargo can become

dangerous in an accident or sud-

den stop.

Do not apply a total load of more

than 22 lb (10 kg) to a single hook.

2-70 Instruments and controls

the seatbacks. In a sudden stop

or collision, unsecured cargo

could cause personal injury

.

The child restraint top tether

strap may be damaged by con-

tact with the parcel shelf or items

in the cargo area. Remove the

parcel shelf from the vehicle or

store it in its storage space. Also,

secure any lose items in the cargo

area. Your child could be seriously

injured or killed in a collision if the

top tether strap is damaged.

JVI1334X

JVI1335X

Removal

PARCEL SHELF

1. Open the liftgate. (See “Liftgate” (P.3-

CAUTION

26).)

WARNING

2. Detach both of the ropes (left and

right) from the inside of the liftgate.

3. Detach the parcel shelf by simply

pulling it rearwards through the lift-

gate opening.

Make sure the parcel shelf is care-

fully stored when not in use in order

to prevent any damage.

.

Never put anything on the parcel

shelf, no matter how small. Any

object on it could cause an injury

in case of an accident or if the

brakes are applied suddenly.

Do not leave the parcel shelf in

position when it is disengaged

from the grooves.

Installation

1. Open the liftgate.

.

2. Insert the parcel shelf by pushing it

forwards as far as possible through

the liftgate opening.

Properly secure all cargo to help

prevent it from sliding or shifting.

Do not place cargo higher than

3. Attach the corresponding ropes to

each side

of the liftgate.

Instruments and controls 2-71

ROOF RACK (if so equipped)

4. Close the liftgate.

GAWR are located on the F.M.V.S.S. or C.V.

M.S.S. certification label (located on the

driver’s door pillar). For additional infor-

mation regarding GVWR and GAWR, refer

to “Vehicle loading information” (P.10-11).

WARNING

.

Always install the cross bars onto

the roof side rails before loading

cargo of any kind. Loading cargo

directly onto the roof side rails or

the vehicle’s roof may cause ve-

hicle damage.

Drive extra carefully when the

vehicle is loaded at or near the

cargo carrying capacity, espe-

cially if the significant portion of

that load is carried on the cross

bars.

Heavy loading of the cross bars

has the potential to affect the

vehicle stability and handling

during sudden or unusual hand-

ling maneuvers.

JVI0889X

Do not apply any load directly to the roof

side rails. Cross bars must be installed

before applying load/cargo/luggage to

the roof of the vehicle. Genuine NISSAN

accessory cross bars are available

through a NISSAN dealer. It is recom-

mended that you visit a NISSAN dealer for

additional information.

The service load capacity for the roof side

rails is 150 lb (68 kg), however do not

exceed the accessory cross bars load

capacity.

.

Roof rack cross bars should be

evenly distributed.

Be careful that your vehicle does not

exceed the Gross Vehicle Weight Rating

(GVWR) or its Gross Axle Weight Rating

(GAWR front and rear). The GVWR and

Do not exceed maximum roof

rack cross bars load.

2-72 Instruments and controls

Instruments and controls -> Power outlet for Your Nissan Qashqai SUV 2020

Popular Manuals