Instruments and controls -> Rear door alert for Your Nissan Qashqai SUV 2020

INTELLIGENT 4X4 LOCK SWITCH (if  
so equipped)  
REAR DOOR ALERT  
The Rear Door Alert system functions  
under certain conditions to indicate there  
may be an object or passenger in the rear  
seat(s). Check the seat(s) before exiting  
the vehicle.  
The Rear Door Alert system is initially  
disabled. The driver can enable the sys-  
tem using the vehicle information display.  
For additional information, see “Vehicle  
Settings” (P.2-23).  
.
.
When the driver puts the vehicle in the  
P (Park) position, a message appears  
in the vehicle information display for  
the driver to “Dismiss Message” or  
“Disable Alert” if desired.  
With the system enabled, when the  
driver exits the vehicle, an audible alert  
(horn sound) will occur unless a rear  
door is opened and closed within a  
short time to deactivate the alert.  
.
.
If the doors are locked before the alert  
is deactivated by opening a rear door,  
the horn will sound.  
If the system is activated but the  
liftgate is opened before opening a  
rear door, the horn will be delayed  
until after the liftgate is closed.  
If the audible horn alert occurs, a  
message will also appear in the vehi-  
cle information display that states,  
“Check Back Seat for all articles”. For  
additional information, see “45. Check  
Back Seat For all articles” (P.2-36).  
When the system is enabled:  
.
The system is activated when a rear  
door is opened and closed within 10  
minutes of the vehicle being driven.  
When the vehicle is started and the  
system is activated, a visual message  
appears in the vehicle information  
display. For additional information,  
see “44. Rear Door Alert is activated”  
(P.2-36).  
If a rear door is opened and closed but  
the vehicle is not driven within ap-  
proximately 10 minutes, the system  
will not be activated. A rear door must  
be opened and closed and the vehicle  
is driven within 10 minutes for the  
system to activate.  
JVI1595X  
The Intelligent 4x4 LOCK switch is located  
on the instrument panel. The AWD LOCK  
indicator light will illuminate when the  
switch is turned on. For additional infor-  
mation, refer to “Intelligent 4x4” (P.5-121).  
.
.
Each time you push the switch, the AWD  
mode will switch: AUTO ? LOCK ? AUTO.  
WARNING  
.
If the driver selects “Disable  
Alert”, no audible alert will be  
provided regardless of rear door  
open/close status.  
When the Rear Door Alert system is  
activated and a driver exits the vehicle  
after arriving at a destination:  
Instruments and controls 2-63  
ECO MODE SWITCH  
system.  
.
.
There may be times when there is  
an object or passenger in the rear  
seat(s) but the audible alert does  
not sound. For example, this may  
occur if rear seat passengers  
enter or exit the vehicle during a  
trip.  
.
.
The ECO mode system will turn off  
automatically if a malfunction occurs  
in the system.  
Turn off the ECO mode system when  
acceleration is required such as when:  
— driving with a heavy load of pas-  
sengers or cargo in the vehicle  
The system does not directly  
detect objects or passengers in  
the rear seat(s). Instead, it can  
— driving on a steep uphill slope  
detect when  
a rear door is  
opened and closed, indicating  
that there may be something in  
the rear seat(s).  
JVS0185X  
NOTE:  
The ECO mode system helps to enhance  
the fuel economy by controlling the  
engine and CVT operation (for CVT mod-  
els) automatically to avoid rapid accelera-  
tion.  
To turn on the ECO mode system, push  
the ECO switch. The ECO mode indicator  
appears on the meter.  
There may be times when the horn  
sounds but there are no objects or  
passengers in the rear seat(s).  
For additional information, see “44. Rear  
Door Alert is activated” (P.2-36).  
To turn off the ECO mode, push the ECO  
switch again. The ECO mode indicator will  
turn off.  
.
The ECO mode system cannot be  
turned off while the accelerator pedal  
is depressed even if the ECO switch is  
pushed to OFF. Release the accelera-  
tor pedal to turn off the ECO mode  
2-64 Instruments and controls