Get Instruments and controls -> Security systems Guide for Nissan Qashqai SUV 2020

SECURITY SYSTEMS

System temporarily unavailable

Maintenance

If the vehicle is parked in direct sunlight

under high temperature conditions (over

approximately 40°C (104°F) and then

started, the TSR system may be deacti-

vated automatically. The “Unavailable

high cabin temperature” warning mes-

sage will appear in the vehicle informa-

tion display.

The TSR uses the same multi-sensing

front camera unit that is used by the

Lane Departure Warning (LDW) system,

located in front of the interior rearview

mirror. For maintenance of the camera,

see “System maintenance” (P.5-39).

Action to take:

When the interior temperature is reduced,

the TSR system will resume operating

automatically.

JVI1587X

System Malfunction

Your vehicle has two types of security

systems, as follows:

If the TSR system malfunctions it will be

turned off automatically and the TSR

"Malfunction" warning message will ap-

pear in the vehicle information display.

Vehicle security system

NISSAN Vehicle Immobilizer System

The security condition will be shown by

Action to take:

the security indicator light.

VEHICLE SECURITY SYSTEM

If the TSR "Malfunction" warning mes-

sage appears, pull off the road at a safe

location and stop the vehicle. Turn the

engine off and restart the engine. If the

TSR "Malfunction" message continues to

appear, have the system checked by a

NISSAN dealer.

The vehicle security system provides

visual and audio alarm signals if someone

opens the doors, hood (if so equipped)

and liftgate when the system is armed. It

is not, however, a motion detection type

system that activates when a vehicle is

moved or when a vibration occurs.

The system helps deter vehicle theft but

2-46 Instruments and controls

cannot prevent it, nor can it prevent the

theft of interior or exterior vehicle com-

ponents in all situations. Always secure

your vehicle even if parking for a brief

period. Never leave your keys in the

vehicle, and always lock it when unat-

tended. Be aware of your surroundings,

and park in secure, well-lit areas when-

ever possible.

Many devices offering additional protec-

tion, such as component locks, identifica-

tion markers, and tracking systems, are

available at auto supply stores and speci-

alty shops. Your NISSAN dealer may also

offer such equipment. Check with your

insurance company to see if you may be

eligible for discounts for various theft

protection features.

pre-armed. The vehicle security sys-

tem will automatically shift into the

armed phase. The security light begins

to flash once every three seconds. If

during the pre-armed phase one of

the following occurs, the system will

not arm:

Any door is unlocked with the key

fob (if so equipped), the Intelligent

Key (if so equipped), mechanical

key, or door request switch.

Ignition switch is placed in the ON

position.

Even when the driver and/or passen-

gers are in the vehicle, the system will

activate with all the doors, hood (if so

equipped) and liftgate locked with the

ignition switch placed in the LOCK posi-

tion. When placing the ignition switch in

the ON position, the system will be

released.

SIC2045

How to arm the vehicle security

system

1. Close all windows. The system can be

armed even if the windows are open.

2. Remove the keys from the vehicle.

Vehicle security system activation

3. Close all doors, hood (if so equipped)

and liftgate. Lock all doors. The doors

can be locked with the key fob (if so

equipped), Intelligent Key (if so

equipped), door handle request switch

(if so equipped), power door lock

switch, or mechanical key.

4. Confirm that the security indicator

light stays on for about 30 seconds.

The vehicle security system is now

The vehicle security system will give the

following alarm:

The headlights blink and the horn

sounds intermittently.

The alarm automatically turns off

after approximately 50 seconds. How-

ever, the alarm reactivates if the

vehicle is tampered with again.

The alarm is activated by:

Instruments and controls 2-47

opening any doors, the hood (if so

equipped) or liftgate without using the

key or Intelligent Key (even if the door

is unlocked by releasing the door

inside lock knob).

10 seconds.

3. Repeat step 1 and 2 again.

4. Restart the engine while holding the

device (which may have caused the

interference) separate from the regis-

tered key.

For Canada:

This device complies with Industry Ca-

nada licence-exempt RSS standard(s).

Operation is subject to the following

two conditions: (1) this device may not

cause interference, and (2) this device

must accept any interference, including

interference that may cause undesired

operation of the device.

How to stop an activated alarm

If this procedure allows the engine to

start, NISSAN recommends placing the

registered key on a separate key ring

to avoid interference from other de-

vices.

The alarm stops only by unlocking a door

or the liftgate with the mechanical key,

pressing the UNLOCK

button on the

key fob (if so equipped) or the Intelligent

Key (if so equipped), or pushing the

request switch (if so equipped) on the

driver’s or passenger’s door in range of

the door handle.

Statement related to section 15 of FCC

rules for NISSAN Vehicle Immobilizer

System (CONT ASSY-BCM. ANT ASSY-

IMMOBILISER)

FCC Notice:

For USA:

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including inter-

ference that may cause undesired op-

eration.

Note: Changes or modifications not

expressly approved by the party re-

sponsible for compliance could void

the user’s authority to operate the

equipment.

NISSAN VEHICLE IMMOBILIZER SYS-

TEM

The NISSAN Vehicle Immobilizer System

will not allow the engine to start without

the use of the registered key.

If the engine fails to start using the

registered key, it may be due to inter-

ference caused by another registered key,

an automated toll road device or auto-

mated payment device on the key ring.

Restart the engine using the following

procedures:

1. Leave the ignition switch in the ON

position for approximately 5 seconds.

2. Place the ignition switch in the OFF or

LOCK position and wait approximately

2-48 Instruments and controls

WIPER AND WASHER SWITCH

recommended you visit a NISSAN dealer

for this service.

WARNING

In freezing temperatures the washer

solution may freeze on the wind-

shield and obscure your vision which

may lead to an accident. Warm wind-

shield with the defroster before you

wash the windshield.

CAUTION

SIC2045

Do not operate the washer con-

tinuously for more than 30 sec-

onds.

Security indicator light

The security indicator light blinks when-

ever the ignition switch is placed in the

OFF or LOCK position.

Do not operate the washer if the

reservoir tank is empty.

Do not fill the window washer

reservoir tank with washer fluid

concentrates at full strength.

Some methyl alcohol based

washer fluid concentrates may

permanently stain the grille if

spilled while filling the window

washer reservoir tank.

Pre-mix washer fluid concen-

trates with water to the manu-

facturer’s recommended levels

before pouring the fluid into the

window washer reservoir tank. Do

This function indicates the NISSAN Vehi-

cle Immobilizer System is operational.

If the NISSAN Vehicle Immobilizer System

is malfunctioning, the light will remain on

while the ignition switch is placed in the

ON position.

If the light still remains on and/or the

engine will not start, seek service for

the NISSAN Vehicle Immobilizer System

as soon as possible. Please bring all

registered keys that you have. It is

Instruments and controls 2-49

Instruments and controls -> Security systems for Your Nissan Qashqai SUV 2020

Popular Manuals