Get Instruments and controls -> Windows Guide for Nissan Qashqai SUV 2020

WINDOWS

seconds, power to the windows is can-

celed.

POWER WINDOWS

Properly secure all cargo with

ropes or straps to help prevent it

from sliding or shifting. In a sud-

den stop or collision, unsecured

cargo could cause personal in-

jury.

WARNING

Make sure that all passengers

have their hands, etc. inside the

vehicle while it is in motion and

before closing the windows. Use

the window lock switch to pre-

vent unexpected use of the

power windows.

To help avoid risk of injury or

death through unintended opera-

tion of the vehicle and or its

systems, including entrapment

in windows or inadvertent door

lock activation, do not leave chil-

dren, people who require the

assistance of others or pets un-

attended in your vehicle. Addi-

tionally, the temperature inside a

closed vehicle on a warm day can

quickly become high enough to

cause a significant risk of injury

or death to people and pets.

The power windows operate when the

ignition switch is in the ON position, or for

about 45 seconds after the ignition

switch is placed in the OFF position. If

the driver’s or front passenger’s door is

opened during this period of about 45

Instruments and controls 2-73

Locking passengers’ windows

When the lock button is pushed in, only

the driver side window can be opened or

closed. Push it in again to cancel.

SIC4533

SIC4523

Window lock button

Driver side window

Rear left passenger side window

Front passenger side window

Rear right passenger side window

Passenger side power window

switch

The passenger side switch will open or

close only the corresponding window. To

open or close the window, push down or

pull up the switch and hold it.

Main power window switch (driver’s

side)

To open or close the window, push down

or pull up the switch and hold it. The

main switch (driver side switches) will

open or close all the windows.

2-74 Instruments and controls

Auto-reverse function

If the windows do not close auto-

matically

If the power window automatic function

(closing only) does not operate properly,

perform the following procedure to initi-

alize the power window system.

1. Start the engine.

2. Close the door.

3. After starting the engine, open the

window completely by operating the

power window switch.

4. Pull the power window switch and

hold it to close the window, and then

hold the switch more than 3 seconds

after the window is closed completely.

5. Release the power window switch.

Operate the window by the automatic

function to confirm the initialization is

complete.

If the power window automatic function

does not operate properly after perform-

ing the procedure above, it is recom-

mended you have your vehicle checked

by a NISSAN dealer.

WARNING

There are some small distances im-

mediately before the closed position

which cannot be detected. Make sure

that all passengers have their hands,

etc., inside the vehicle before closing

the window.

If the control unit detects something

caught in the window as it is closing, the

window will be immediately lowered.

The auto reverse function can be acti-

vated when the window is closed by

automatic operation when the ignition

switch is in the ON position or for 45

seconds after the ignition switch is placed

in the OFF position.

Depending on the environment or driv-

ing conditions, the auto reverse func-

tion may be activated if an impact or

load similar to something being caught

in the window occurs.

SIC4524

Automatic operation

The automatic operation is available for

the switch that has an

mark on its

surface.

To fully open or close the window, com-

pletely push down or pull up the switch

and release it; the switch need not be

held. The window will automatically open

or close all the way. To stop the window,

just push or lift the switch in the opposite

direction.

A light push or pull on the switch will

cause the window to open or close until

the switch is released.

Instruments and controls 2-75

MOONROOF (if so equipped)

during this period of about 45 seconds,

power to the moonroof is canceled.

WARNING

In an accident you could be

thrown from the vehicle through

an open moonroof. Always use

seat belts and child restraints.

Do not allow anyone to stand up

or extend any portion of their

body out of the moonroof open-

ing while the vehicle is in motion

or while the moonroof is closing.

JVI0655X

CAUTION

Sunshade

The sunshade will open automatically

when the moonroof is opened. However,

it must be closed manually.

Remove water drops, snow, ice or

sand from the moonroof before

opening.

Do not place any heavy object on

the moonroof or surrounding

area.

Tilting the moonroof

To tilt up, first close the moonroof, then

push the switch to the tilt up position

and release it; it need not be held. To tilt

down the moonroof, push the switch to

POWER MOONROOF

The moonroof only operates when the

the tilt down position

ignition switch is in the ON position.

The moonroof is operational for about 45

seconds, even if the ignition switch is

pushed to the OFF position. If the driver’s

door or the passenger’s door is opened

2-76 Instruments and controls

Instruments and controls -> Windows for Your Nissan Qashqai SUV 2020

Popular Manuals