Monitor, heater, air conditioner, audio and phone systems -> RearView Monitor for Your Nissan Qashqai SUV 2020

NISSANCONNECT® OWNER’S MANUAL  
REARVIEW MONITOR (if so equipped)  
For models with NissanConnect® system,  
refer to NissanConnect® Owner’s Manual  
that includes the following information.  
For models with NissanConnect® System  
and Services featuring Apple CarPlay®  
and Android AutoTM, refer to the Nissan-  
Connect® Owner’s Manual regarding the  
following information.  
Available functions may vary depending  
on the models and specifications.  
.
.
.
.
.
Audio  
Hands-Free Phone  
Apple CarPlay®  
Android AutoTM  
NissanConnect® Services powered by  
SiriusXM®  
.
.
.
Navigation system  
Voice recognition  
Information and settings viewable on  
NissanConnect®  
WAE0016X  
1. CAMERA button  
result in serious injury or death.  
.
RearView Monitor is a conveni-  
ence feature and is not a sub-  
stitute for proper backing. Always  
turn and look out the windows,  
and check mirrors to be sure that  
it is safe to move before operat-  
WARNING  
.
Failure to follow the warnings  
and instructions for proper use  
of the RearView Monitor could  
4-2 Monitor, heater, air conditioner, audio and phone systems  
ing the vehicle. Always back up  
slowly.  
.
.
The system is designed as an aid  
to the driver in showing large  
stationary objects directly behind  
the vehicle, to help avoid dama-  
ging the vehicle.  
The distance guide line and the  
vehicle width line should be used  
as a reference only when the  
vehicle is on a level paved sur-  
face. The distance viewed on the  
monitor is for reference only and  
may be different than the actual  
distance between the vehicle and  
displayed objects.  
JVH1585X  
SAA1896  
To display the rear view, the RearView  
Monitor system uses a camera located  
HOW TO READ THE DISPLAYED  
LINES  
just above the vehicle’s license plate  
.
Guiding lines which indicate the vehicle  
width and distances to objects with  
REARVIEW MONITOR SYSTEM OP-  
ERATION  
When the ignition switch is placed in the  
ON position, move the shift lever to the R  
(Reverse) position to operate the Rear-  
View Monitor.  
CAUTION  
reference to the bumper line  
displayed on the monitor.  
are  
Do not scratch the camera lens when  
cleaning dirt or snow from the front  
of the camera.  
Distance guide lines:  
Indicate distances from the vehicle body.  
.
.
.
.
Red line : approximately 1.5 ft (0.5 m)  
Yellow line : approximately 3 ft (1 m)  
Green line : approximately 7 ft (2 m)  
The RearView Monitor system automati-  
cally shows a rear view of the vehicle  
when the shift lever is placed in the R  
(Reverse) position.  
Green line  
mately 10 ft (3 m)  
Vehicle width guide lines  
Indicate the vehicle width when backing  
Monitor, heater, air conditioner, audio and phone systems 4-3  
(if so equipped): approxi-  
The radio can still be heard while the  
:
RearView Monitor is active.  
up.  
Predictive course lines  
:
Indicate the predictive course when back-  
ing up. The predictive course lines will be  
displayed on the monitor when the shift  
lever is in the R (Reverse) position and if  
the steering wheel is turned. The predic-  
tive course lines will move depending on  
how much the steering wheel is turned  
and will not be displayed while the steer-  
ing wheel is in the straight ahead position.  
The vehicle width guide lines and the  
width of the predictive course lines are  
wider than the actual width and course.  
DIFFERENCE BETWEEN PREDICTIVE  
AND ACTUAL DISTANCES  
The displayed guidelines and their loca-  
tions on the ground are for approximate  
reference only. Objects on uphill or down-  
hill surfaces or projecting objects will be  
actually located at distances different  
from those displayed in the monitor  
relative to the guidelines (refer to illustra-  
tions). When in doubt, turn around and  
view the objects as you are backing up, or  
park and exit the vehicle to view the  
positioning of objects behind the vehicle.  
JVH1159X  
JVH1160X  
Backing up on a steep uphill  
Backing up on a steep downhill  
When backing up the vehicle up a hill, the  
distance guide lines and the vehicle width  
guide lines are shown closer than the  
actual distance. Note that any object on  
the hill is farther than it appears on the  
monitor.  
When backing up the vehicle down a hill,  
the distance guide lines and the vehicle  
width guide lines are shown farther than  
the actual distance. Note that any object  
on the hill is closer than it appears on the  
monitor.  
4-4 Monitor, heater, air conditioner, audio and phone systems  
position  
if the object projects over the  
actual backing up course.  
HOW TO PARK WITH PREDICTIVE  
COURSE LINES  
WARNING  
.
.
.
If the tires are replaced with  
different sized tires, the predic-  
tive course lines may be dis-  
played incorrectly.  
On a snow-covered or slippery  
road, there may be a difference  
between the predictive course  
line and the actual course line.  
If the battery is disconnected or  
becomes discharged, the predic-  
tive course lines may be dis-  
played incorrectly. If this occurs,  
please perform the following pro-  
cedures:  
SAA1923  
SAA1980  
— Turn the steering wheel from  
lock to lock while the engine is  
running.  
— Drive the vehicle on a straight  
road for more than 5 minutes.  
When the steering wheel is  
turned with the ignition switch in  
the ON position, the predictive  
course lines may be displayed  
Backing up near a projecting object Backing up behind a projecting  
object  
The predictive course lines  
do not  
touch the object in the display. However,  
the vehicle may hit the object if it projects  
over the actual backing up course.  
The position  
is shown farther than the  
in the display. However, the  
is actually at the same dis-  
position  
.
position  
tance as the position . The vehicle may  
hit the object when backing up to the  
Monitor, heater, air conditioner, audio and phone systems 4-5  
incorrectly.  
SAA1897  
SAA1898  
1. Visually check that the parking space  
is safe before parking your vehicle.  
2. The rear view of the vehicle is dis-  
played on the screen when the shift  
lever is moved to the R (Reverse)  
position.  
3. Slowly back up the vehicle adjusting  
the steering wheel so that the pre-  
dictive course lines  
enter the park-  
ing space  
.
4. Maneuver the steering wheel to make  
the vehicle width guide lines parallel  
to the parking space while referring  
to the predictive course lines.  
4-6 Monitor, heater, air conditioner, audio and phone systems  
5. When the vehicle is parked in the  
space completely, move the shift lever  
to the P (Park) position and apply the  
parking brake.  
HOW TO TURN ON AND OFF PRE-  
DICTIVE COURSE LINES  
To turn the predictive course lines on and  
off when the shift lever is in the P (Park)  
position, perform the following operation.  
1. Push the MENU button  
2. Touch the “Settings” key and then  
touch the “Camera” key.  
3. Touch the “Predictive Course Lines”  
key to turn the feature ON or OFF.  
Pushing the CAMERA button while the  
shift lever is in the R (Reverse) position  
can also turn on and off the predictive  
course lines.  
WAE0058X  
ADJUSTING THE SCREEN  
1. Push the MENU button.  
REARVIEW MONITOR SYSTEM LIM-  
ITATIONS  
2. Touch the “Settings” key and then  
touch the “Camera” key.  
WARNING  
3. Touch the “Display Settings” key.  
4. Touch the “Brightness”, “Contrast”,  
Listed below are the system limita-  
tions for RearView Monitor. Failure to  
operate the vehicle in accordance  
with these system limitations could  
result in serious injury or death.  
“Tint”, “Color”, or “Black Level” key.  
5. Adjust the item by touching the “+” or  
“–” key on the touch screen display.  
NOTE:  
Do not adjust any of the display settings  
of the RearView Monitor while the  
vehicle is moving. Make sure the park-  
ing brake is firmly applied.  
.
The system cannot completely  
eliminate blind spots and may  
not show every object.  
Monitor, heater, air conditioner, audio and phone systems 4-7  
.
.
.
Objects on the monitor may not be  
clear in a dark environment.  
.
Underneath the bumper and the  
corner areas of the bumper can-  
not be viewed on the RearView  
Monitor because of its monitoring  
range limitation. The system will  
not show small objects below the  
bumper, and may not show ob-  
jects close to the bumper or on  
the ground.  
Objects viewed in the RearView  
Monitor differ from actual dis-  
tance because a wide-angle lens  
is used.  
Objects in the RearView Monitor  
will appear visually opposite  
compared to when viewed in the  
rearview and outside mirrors.  
Use the displayed lines as a re-  
ference. The lines are highly af-  
fected by the number of  
occupants, fuel level, vehicle po-  
sition, road conditions and road  
grade.  
.
.
When washing the vehicle with  
high-pressure water, be sure not  
to spray it around the camera.  
Otherwise, water may enter the  
camera unit causing water con-  
densation on the lens, a malfunc-  
tion, fire or an electric shock.  
Do not strike the camera. It is a  
precision instrument. Otherwise,  
it may malfunction or cause da-  
mage resulting in a fire or an  
electric shock.  
There may be a delay when switching  
between views.  
If dirt, rain or snow accumulates on  
the camera, the RearView Monitor  
may not display objects clearly. Clean  
the camera.  
.
Do not use wax on the camera lens.  
Wipe off any wax with a clean cloth  
dampened with a diluted mild clean-  
ing agent, then wipe with a dry cloth.  
.
.
.
The following are operating limitations  
and do not represent a system malfunc-  
tion:  
.
.
.
When the temperature is extremely  
high or low, the screen may not clearly  
display objects.  
When strong light directly shines on  
the camera, objects may not be dis-  
played clearly.  
Vertical lines may be seen in objects  
on the screen. This is due to strong  
reflected light from the bumper.  
.
.
Make sure that the liftgate is  
securely closed when backing up.  
.
.
The screen may flicker under fluores-  
Do not put anything on the rear-  
view camera. The rearview cam-  
era is installed above the license  
plate.  
cent light.  
The colors of objects on the RearView  
Monitor may differ somewhat from  
the actual color of objects.  
4-8 Monitor, heater, air conditioner, audio and phone systems  
diluted mild cleaning agent and then  
wiping it with a dry cloth.  
JVH1585X  
SYSTEM MAINTENANCE  
CAUTION  
.
.
Do not use alcohol, benzine or  
thinner to clean the camera. This  
will cause discoloration.  
Do not damage the camera as the  
monitor screen may be adversely  
affected.  
If dirt, rain or snow accumulates on the  
camera  
, RearView Monitor may not  
display objects clearly. Clean the camera  
by wiping it with a cloth dampened with a  
Monitor, heater, air conditioner, audio and phone systems 4-9