Pre-driving checks and adjustments -> Mirrors for Your Nissan Qashqai SUV 2020

MIRRORS  
SPA2143  
SPA2450-A  
SPA2447  
INSIDE MIRROR  
Adjust the angle of the inside mirror to  
the desired position.  
Manual anti-glare type (if so  
equipped)  
Automatic anti-glare type (if so  
equipped)  
The night position  
will reduce glare  
The inside mirror is designed so that it  
automatically changes reflection accord-  
ing to the intensity of the headlights of  
the following vehicle.  
The anti-glare system will be automati-  
cally turned on when the ignition switch is  
placed in the ON position.  
from the headlights of vehicles behind  
you at night.  
Use the day position  
when driving in  
daylight hours.  
WARNING  
When the anti-glare system is turned on,  
the indicator light  
will illuminate and  
Use the night position only when  
necessary, because it reduces rear  
view clarity.  
excessive glare from the headlights of the  
vehicle behind you will be reduced.  
Push the “*” switch to make the inside  
rearview mirror operate normally. The  
3-32 Pre-driving checks and adjustments  
indicator light will turn off. Push the “I”  
switch to turn the system on.  
Do not allow any object to cover the  
Defrosting outside mirrors (if so  
equipped)  
The outside mirrors will be heated when  
the rear window defroster switch is  
operated. (See “Rear window and outside  
mirror defroster switch” (P.2-52).)  
sensors  
or apply glass cleaner on  
them. Doing so will reduce the sensitiv-  
ity of the sensor, resulting in improper  
operation.  
For the HomeLink® Universal Transceiver  
operation, see “HomeLink® Universal  
Transceiver” (P.2-80).  
OUTSIDE MIRRORS  
WARNING  
JVP0395X  
Objects viewed in the outside mirror  
on the passenger side are closer  
than they appear. Be careful when  
moving to the right. Using only this  
mirror could cause an accident. Use  
the inside mirror or glance over your  
shoulder to properly judge distances  
to other objects.  
Adjusting outside mirrors  
The outside mirror control switch is  
located on the driver’s armrest.  
The outside mirror will operate only when  
the ignition switch is in the ACC or ON  
position.  
Move the switch right or left to select the  
right or left side mirror  
using the control switch.  
, then adjust  
Pre-driving checks and adjustments 3-33  
AUTOMATIC DRIVE POSITIONER (if  
so equipped)  
The automatic drive positioner system  
has two features:  
.
.
Memory storage function  
Entry/exit function  
SPA1829  
SIC3869  
VANITY MIRROR  
To use the front vanity mirror, pull down  
the sun visor and pull up the cover.  
Foldable outside mirrors  
Fold the outside mirror by pushing it  
toward the rear of the vehicle.  
3-34 Pre-driving checks and adjustments