Get Pre-driving checks and adjustments -> Remote keyless entry system Guide for Nissan Qashqai SUV 2020

REMOTE KEYLESS ENTRY SYSTEM

(if so equipped)

It is possible to lock/unlock all doors

(including the liftgate), and activate the

panic alarm by using the key fob from

outside the vehicle.

fob while on an airplane. Make sure

the buttons are not operated unin-

tentionally when the unit is stored

during a flight.

dealer.

For information regarding the replace-

ment of a battery, see “Key fob battery

replacement” (P.8-21).

Before locking the doors, make sure the

key is not left in the vehicle.

The key fob can operate at a distance of

approximately 33 ft (10 m) from the

vehicle. (The effective distance depends

upon the conditions around the vehicle.)

As many as 4 key fobs can be used with

one vehicle. For information concerning

the purchase and use of additional key

fobs, contact a NISSAN dealer.

CAUTION

The following conditions or occur-

rences will damage the key fob.

Do not allow the key fob to

become wet.

Do not drop the key fob.

The key fob will not function:

Do not strike the key fob sharply

When the key fob is not within the

against another object.

operational range.

If the outside temperature is be-

low 14°F (-10°C) degrees, the bat-

tery of key fob may not function

properly.

Do not place the key fob for an

extended period in an area where

temperatures exceed 140°F

(60°C).

When the doors are open or not

closed securely.

When the key is in the ignition switch.

When the battery is discharged.

WARNING

If a key fob is lost or stolen, NISSAN

recommends erasing the ID code of

that key fob. This will prevent the key

fob from unauthorized use to unlock

the vehicle. For information regard-

ing the erasing procedure, it is re-

commended that you visit a NISSAN

The remote keyless entry key fob

transmits radio waves when the

buttons are pushed. The FAA advises

that the radio waves may affect

aircraft navigation and communica-

tion systems. Do not operate the key

3-8 Pre-driving checks and adjustments

the welcome light and farewell light

function, see “Vehicle Settings” (P.2-23).

2. Push the UNLOCK

button again

within 5 seconds.

All the doors and the liftgate unlock.

The hazard indicator flashes once if

all doors are completely closed.

Locking doors

1. Remove the key from the ignition

switch.

All doors will be locked automatically

unless one of the following operations is

performed within 1 minute of pushing the

2. Close all the doors.

3. Push the LOCK

button

on the

UNLOCK

button.

key fob.

Any door or liftgate is opened.

4. All the doors will lock.

All of the doors will lock when the

The ignition switch is placed in the ON

position.

LOCK

button is pushed even

though a door remains open.

NOTE:

JVP0308X

5. The hazard indicator flashes twice

The unlocking operation can be chan-

ged in selective unlock in the Vehicle

Settings of the vehicle information dis-

play. For additional information, refer to

“Vehicle Settings” (P.2-23).

Using panic alarm

If you are near your vehicle and feel

threatened, you may activate the alarm

to call attention as follows:

and the horn chirps once.

Jackknife type key release button

LOCK button

When the LOCK

button is pushed

with all doors locked, the hazard

indicator flashes twice and the horn

chirps once as a reminder that the

doors are already locked.

UNLOCK button

PANIC button

Battery indicator light

HOW TO USE REMOTE KEYLESS

ENTRY SYSTEM

Welcome light and farewell light

function

When you lock or unlock the doors or the

liftgate, the daytime running lights, park-

ing lights and the tail lights will illuminate

for a period of time. The welcome light

and farewell light function can be dis-

abled. For information about disabling

Operate the door handles to confirm

that the doors have been securely

locked.

1. Push the PANIC

button

on the

key fob for more than 0.5 seconds.

Unlocking doors

2. The theft warning alarm and head-

1. Push the UNLOCK

button

lights will stay on for 25 seconds.

the key fob.

The driver’s door unlocks.

The hazard indicator flashes once if

all doors are completely closed.

3. The panic alarm stops when:

It has run for 25 seconds, or

Pre-driving checks and adjustments 3-9

Any of the buttons on the key fob is

pushed. (Note: the PANIC button

must be pushed for more than 1

second.)

Mode (Pushing the

button)

DOOR UNLOCK

DOOR LOCK

HAZARD - once

HAZARD - twice

Hazard indicator and horn mode

Hazard indicator mode

HORN - none

HORN - once

HAZARD - none

HAZARD - twice

Battery indicator light

The battery indicator light

illuminates

when you push any button. If the light

does not illuminate, the battery is weak or

needs replacement. For information re-

garding replacement of a battery, see

“Key fob battery replacement” (P.8-21).

Setting hazard indicator and horn

mode

This vehicle is set in hazard indicator and

horn mode when you first receive the

vehicle.

In hazard indicator and horn mode, when

the LOCK

button

is pushed, the

hazard indicator flashes twice and the

horn chirps once. When the UNLOCK

button

is pushed, the hazard indicator

flashes once.

If the horn chirp is not necessary, you can

switch to hazard indicator only mode by

following the switching procedure.

In hazard indicator only mode, when the

LOCK

button is pushed, the hazard

indicator flashes twice. When the UNLOCK

button is pushed, neither the hazard

indicator nor the horn operates.

3-10 Pre-driving checks and adjustments

INTELLIGENT KEY SYSTEM (if so equipped)

Switching procedure:

CAUTION

To switch the hazard indicator and horn

WARNING

operation, push the LOCK

and

UNLOCK

buttons on the key fob

Be sure to carry the Intelligent

Key with you when operating the

vehicle.

Never leave the Intelligent Key in

the vehicle when you leave the

vehicle.

Radio waves could adversely af-

fect electric medical equipment.

simultaneously for more than 2 seconds.

Those who use

a pacemaker

When the hazard indicator mode is

set, the hazard indicator flashes 3

times.

When the hazard indicator and horn

mode is set, the hazard indicator

flashes once and the horn chirps once.

should contact the electric med-

ical equipment manufacturer for

the possible influences before

use.

The Intelligent Key transmits

radio waves when the buttons

are pushed. The FAA advises that

the radio waves may affect air-

craft navigation and communica-

tion systems. Do not operate the

Intelligent Key while on an air-

plane. Make sure the buttons are

not operated unintentionally

when the unit is stored during a

flight.

The Intelligent Key is always communi-

cating with the vehicle as it receives radio

waves. The Intelligent Key system trans-

mits weak radio waves. Environmental

conditions may interfere with the opera-

tion of the Intelligent Key system under

the following operating conditions.

When operating near a location where

strong radio waves are transmitted,

such as a TV tower, power station and

broadcasting station.

When in possession of wireless equip-

ment, such as a cellular phone, trans-

ceiver, and CB radio.

The Intelligent Key system can operate all

the door locks using the remote control-

ler function or pushing the request switch

on the vehicle without taking the key out

from a pocket or purse. The operating

environment and/or conditions may af-

fect the Intelligent Key system operation.

The horn operation can also be turned on

or off in the vehicle information display.

See “Vehicle Settings” (P.2-23).

When the Intelligent Key is in contact

with or covered by metallic materials.

When any type of radio wave remote

control is used nearby.

When the Intelligent Key is placed near

an electric appliance such as a perso-

nal computer.

Be sure to read the following before using

the Intelligent Key system.

Pre-driving checks and adjustments 3-11

Pre-driving checks and adjustments -> Remote keyless entry system for Your Nissan Qashqai SUV 2020

Popular Manuals