Starting and driving -> Parking or parking on hills for Your Nissan Qashqai SUV 2020

PARKING/PARKING ON HILLS  
placed into P (Park) for Continu-  
ously Variable Transmission (CVT)  
model or in an appropriate gear  
for Manual Transmission (MT)  
model. Failure to do so could  
cause the vehicle to move unex-  
pectedly or roll away and result in  
an accident.  
.
Make sure the CVT shift lever has  
been pushed as far forward as it  
can go and cannot be moved  
without depressing the foot  
brake pedal.  
SSD0488  
1. Firmly apply the parking brake.  
2. Continuously Variable Transmission  
.
To help avoid risk of injury or  
death through unintended opera-  
tion of the vehicle and/or its  
systems, do not leave children,  
people who require the assis-  
tance of others or pets unat-  
t e n d e d i n y o u r v e h i c l e .  
Additionally, the temperature in-  
side a closed vehicle on a warm  
day can quickly become high  
enough to cause a significant risk  
of injury or death to people and  
pets.  
(CVT) models:  
WARNING  
Move the shift lever to the P (Park)  
position.  
.
Do not stop or park the vehicle  
over flammable materials such as  
dry grass, waste paper or rags.  
They may ignite and cause a fire.  
Manual Transmission (MT) models:  
Move the shift lever to the R (Reverse)  
gear. When parking on an uphill grade,  
place the shift lever in the 1st gear.  
.
.
Never leave the engine running  
while the vehicle is unattended.  
3. To help prevent the vehicle from roll-  
ing into the street when parked on a  
sloping drive way, it is a good practice  
to turn the wheels as illustrated.  
Do not leave children unattended  
inside the vehicle. They could  
unknowingly activate switches  
or controls. Unattended children  
could become involved in serious  
accidents.  
.
HEADED DOWNHILL WITH CURB:  
.
Safe parking procedures require  
that both the parking brake be  
applied and the transmission  
Turn the wheels into the curb and  
move the vehicle forward until the  
curb side wheel gently touches the  
Starting and driving 5-125  
ELECTRIC POWER STEERING  
curb.  
steering wheel operations that could  
cause the electric power steering to over-  
heat.  
You may hear a noise when the steering  
wheel is operated quickly. However, this is  
not a malfunction.  
.
.
HEADED UPHILL WITH CURB:  
WARNING  
Turn the wheels away from the  
curb and move the vehicle back  
until the curb side wheel gently  
touches the curb.  
.
.
If the engine is not running or is  
turned off while driving, the  
power assist for the steering will  
not work. Steering will be harder  
to operate.  
When the electric power steering  
warning light illuminates with the  
engine running, the power assist  
for the steering will cease opera-  
tion. You will still have control of  
the vehicle but the steering will  
be harder to operate.  
HEADED UPHILL OR DOWNHILL, NO  
If the electric power steering warning  
CURB:  
light  
illuminates while the engine is  
Turn the wheels toward the side of  
the road so the vehicle will move  
away from the center of the road if  
it moves.  
running, it may indicate the electric  
power steering is not functioning prop-  
erly and may need servicing. Have the  
electric power steering checked. It is  
recommended that you visit a NISSAN  
dealer for this service. (See “Electric power  
steering warning light” (P.2-12).)  
4. Models with Intelligent Key system:  
Place the ignition switch in the OFF  
position.  
When the electric power steering warning  
light illuminates with the engine running,  
the power assist for the steering will  
cease operation. You will still have control  
of the vehicle. However, greater steering  
effort is needed, especially in sharp turns  
and at low speeds.  
Models without Intelligent Key sys-  
tem:  
The electric power steering is designed to  
provide power assist while driving to  
operate the steering wheel with light  
force.  
Place the ignition switch in the LOCK  
position and remove the key.  
When the steering wheel is operated  
repeatedly or continuously while parking  
or driving at a very low speed, the power  
assist for the steering wheel will be  
reduced. This is to prevent overheating  
of the electric power steering and protect  
it from getting damaged. While the power  
assist is reduced, steering wheel opera-  
tion will become heavy. When the tem-  
perature of the electric power steering  
goes down, the power assist level will  
return to normal. Avoid repeating such  
The mode of the Power Steering can be  
changed to:  
.
.
NORMAL  
SPORT  
For more information, see “Vehicle infor-  
mation display” (P.2-19).  
5-126 Starting and driving